Creating Wall Art From Scratch Using CNC and VCarve PRO

[@teresausa1]

Love it. Every school in America should have one!

[@PawPawsWorkShop]

Agreed!

[@WildWoodsAustralia]

Looks like some splintery ply! Thanks for the video!

[@PawPawsWorkShop]

Need a little sanding after first coat of paint. Thanks for watching

[@daneilers739]

Love watching your videos.

[@PawPawsWorkShop]

I appreciate that! Thank you very much.

[@ronnorris1504]

Really great idea enjoyed watching.. One question, since it's so thin, what's your recommendation on hangers? Thanks!

[@PawPawsWorkShop]

I’m using double stick tape. Thanks for watching

[@randymainini9390]

I think it looks great! I just am starting out with my table top CNC. I wish there was a way to get the toolpath for this sign. Please let me know what you would charge me for it.

[@kevinrich4637]

Looks great!

[@johndiego3105]

Looks great!! Is the VCarve pro that easy to use? Looks a lot easier than Easel.

[@PawPawsWorkShop]

VCarve has much more capabilities than does easel

[@rickcox3806]

How much does a CNC that you’re using cost like that or where would you even look it up defined that machine you’re using?

[@rickycurry574]

That looks amazing. Is that a thin plywood you using?

[@PawPawsWorkShop]

Yes, it is!

[@rickycurry574]

@@PawPawsWorkShop thank you. I will try that.

Does Easel pro have an easy way to cut away the lines like you did with the scissors ?

[@PawPawsWorkShop]

You can do it in easel but it is a totally different process

Is it easy like that? I’m Avery newbie

[@PawPawsWorkShop]

No it is not

[@BigJeff19999]

Great video, I've been wanting to do something just like this for a wedding sign for my nephew. A couple questions... How thick was that plywood? Was it 1/4, 3/8 maybe? And what do you use for your cut depth per pass? Looks like a 1/4 in upcut bit?

[@PawPawsWorkShop]

This was a 5mm plywood. I used a straight bit because that’s what I had. A downcut bit would be much better

[@tonydevalt9932]

Hello paw paw and audience. Hello, I have the Fox Alien Mauster Pro, and I have a question for you guys, and that is what is the shallowest pocket cut that I can do? What I'm trying to say is what is the thinnest depth I can do on a cnc router (Example) 0.0001 for the cut depth. Please steer me in the right direction. Thanks!

[@PawPawsWorkShop]

You can cut a pocket extremely shallow. The real question is how accurate is you machine set up. Your wasteboard must be dead on or you will not get an even pocket. At 0.0001 you will not have much of a pocket. What are you trying to accomplish

[@rbwoodwork1890]

Nice sign. You probably already know but I’ll mention that control-z will undo.

[@PawPawsWorkShop]

Thank you. Excellent point. I must say I’m bad about using the shortcuts

[@dangoras9152]

Papa couldn't u have welded it instead of using the scissors... Nice project.. Keep it up brother

[@PawPawsWorkShop]

I’ll try it. Usually when you weld you have to clip on only two vectors. I’ll do some experimenting

[@dangoras9152]

Still looks good...

[@mikebaty2069]

Have you given up on Easel Pro?

[@PawPawsWorkShop]

No, I’m still using it. I think people were thinking the same thing about VCarve and the CNC4NEWBIE New carve