New Techniques Used to Make a Special Flag

Testing out the stars with the XCarve. This file is shared for FREE in the Inventables Project page. Next I am using acrylic paint in place of the stain. I am also using different wood for this project also. Link to file for the stars: easel.inventables.com/projects...
Comments or questions My email is:
[e-mail]
Help support my channel Patreon:
/ pawpawsworkshop
jtechphotonics.com
Link to Z axis and CNC machine kits and parts for DIY CNC
cnc4newbie.com
Demon Controller By Designs by Phil:
cnc4newbie.com/store/en/demon...
WOW! 15% OFF offer. Used the code below to take advantage of this fantastic offer.
Affiliate Link to Purchase STARBOND GLUE:
15% OFF PROMO CODE pawpawsworkshop15
www.starbond.com?rfsn=2376834.ca9c16
_______________________________________________________________________________________________
AMAZON AFFILIATE LINKS:
As an Amazon affiliate I earn from qualifying purchases:
Link to My Amazon Affiliate Store:
www.amazon.com/shop/pawpawswo...
Frequently needed supplies:
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ

[@jameskennyii9388]

Thanks for sharing the stars on the project page. It’s one of the nicest unions I made.

[@PawPawsWorkShop]

Awesome! I'm glad that it worked well for you.

[@dexterbutler9735]

Not sure if you heard. But minwax have changed their colors. Tru blue and crimson are no longer available. Also you can get solid or semitransparent. Most are saying the solid goes on more like paint, and the semitransparent shows the burned grain better.

[@PawPawsWorkShop]

Thank you for that information and sharing it with the community.

[@CROWLEY2478]

Love the videos. I go back from time to time to your old videos to help me with my xcarve. Thanks

[@PawPawsWorkShop]

That's awesome. That is why I made them in the first place. With the new CNC I hope to do the same with the VCarve Desktop and UGS. New chapter coming. lol Thank you very much.

[@hvwoodcreations6278]

Nice work as always

[@PawPawsWorkShop]

Thank you very much

[@andrewjohns6823]

you make everything look so easy.. well done again

[@PawPawsWorkShop]

Thank you very much for the compliment.

[@lisahorton1247]

Great looking flag!

[@PawPawsWorkShop]

Thank you very much.

[@josephtravis3426]

I love the project and will be interesting in making this myself, but what I noticed that I could really use at the moment are those clamps that you made up for panel glue ups. Any chance you might be able to show those off and a quick how to video. Thanks for all you do. This Army Vet appreciates it.

[@PawPawsWorkShop]

Yes, I have shown how to make this jig in a previous video. Here is the link: kzbin.info/www/bejne/e5zdoJWwa6h6fbc Thank you very much and thank you for your service.

[@clarkhussey5865]

The union I’m pretty sure . Should be 14 13/16” x 10.5”.

[@PawPawsWorkShop]

That very well may be, however, I have chosen to alter the ratios slightly to make my flags with a little easier measurements.

[@bhutch216]

You are correct. At least should have kept it closer than 13” (14.5” or 15” ) It looks disproportionate. There are flag ratios for a reason.

[@keithruffner7168]

@@bhutch216 shut up karen

[@chrism.8105]

Have always enjoyed your work. And super generous of your to share your Xcarve file. Had a question about that - what is the smallest you attempted to make your union field and carve in stars? Thanks for all that you do.

[@PawPawsWorkShop]

The small union is approximately 7.5x8" Thank you very much.

[@scotthamel7928]

What depth do you set your stars at in easel? And where can I find that star file on inventables?

[@PawPawsWorkShop]

The link to the file is in the description. The depth of the stars is approximately .2" I looked at the preview to set the depth.

[@jorgecrissien6931]

Could you add the link to the acrylics that you use. Thanks

[@PawPawsWorkShop]

I do not have a specific brand. I look for the big bottles at Hobby Lobby, Michael's, or WalMart. The cheap stuff works great for the flags.

[@jbnremt]

Hey, what size bit are you using to carve your stars? I am having some difficulty getting mine carved. I am attempting with a 90 degree V-bit 3/8 diameter. The router plunges the initial cut, but then raises and jogs over the work material. Thanks!

[@ftnirish74]

Love this instructional just have the others in your library. I saw that you glued and stapled the back braces. Did you glue up each board in seem as well? Thank you and keep up the great work.

[@PawPawsWorkShop]

I have in the past but it is not necessary.

[@mikeledee8786]

The problem I am having with 1x12 is the cupping, what say you? Thanks.

[@PawPawsWorkShop]

It is drying uneven. That can be a problem and is why I usually use a 2x4 for the flags and rip them down. This 1x12 was purchased and cut the same day and I did not have the cupping problem.

[@daniel23232000]

Do you like the staples better than the brad nails?

[@PawPawsWorkShop]

I like both depending on what project that I am working on. The staples have a better holding power.

[@daniel23232000]

@@PawPawsWorkShop im guessing you like them better for your flags and I may have to go pick one up for mine, usually use a brad nailer. Your videos are very helpful.

[@PawPawsWorkShop]

Thank you

[@williammitchell9300]

Paw Paw how did you make your stop block for the miter saw

[@PawPawsWorkShop]

Yes, I did make that stop block several years ago.

[@williammitchell9300]

@@PawPawsWorkShop Can you put that building a Stop Block on a up coming show that would be a good thing. and Love your Shows

[@PawPawsWorkShop]

Yes, I had never thought of doing that. I have had that stop block for so many years now I guess I just take it for granted.

[@BrettBecraft]

I found that when people resize the image to fit what they are fitting in the program they will not resize the whole drawing.

[@PawPawsWorkShop]

Yes, that certainly can happen

[@dr.mondonicowilliams1578]

I love your work. How long did it take you to do this?

[@PawPawsWorkShop]

Thank you, it takes about two hours.

[@shanemaloney1257]

I noticed on this file when i open it that the depth is set to .2 Is that the correct depth? I've seen in the past you said no more than .12?

[@PawPawsWorkShop]

On the vast majority of the projects that I carve they are shallow. For the stars I want a sharp point at the bottom. The .2 does that. If you want a flat bottom then set the depth at .1.

[@shanemaloney1257]

@@PawPawsWorkShop Thank you!

[@Cam-wi3tp]

beautiful, all i need now is $2500 for a cnc machine!

[@PawPawsWorkShop]

You can do this with a much smaller cnc machine for less money. It is possible. Pick and chose your tools wisely.

[@francineshea4723]

How much do you charge for your flag?

[@PawPawsWorkShop]

The basic flag is $100 plus shipping

[@ohske]

☺️👍👍👍👌❤❤❤

[@PawPawsWorkShop]

Thank you

[@gccooley]

Was really interested till I saw how the stars are made, average guy will not be able to do this.

[@PawPawsWorkShop]

Thank you for your comments. As I stated in the video an average person without a cnc can create a stencil and paint the stars. It is a very easy process and many people do this everyday.

[@dvsmotions]

You should do a confederate flag next.

[@PawPawsWorkShop]

No, I do not think that would be of interest for my subscribers

[@mikkelhong1002]

Bad timing, paw paw. Rip George Floyd.

[@PawPawsWorkShop]

It's tragic and very upsetting what happened. However, there are many fine officers in the country who put their life on the line each and every day for all of us. My son is one of them. This flag will be going to one of these officers.

[@admikewalker]

Paw Paw’s WorkShop Thank you for your work and your position. I’m a true fan and I love your channel. Thanks for the information.

[@librarymark]

@@PawPawsWorkShop Any alteration of the flag is a desicration of it. Sure, there are fine police officers, but they don't get to alter the flag to suit them.