Motorola Moto Edge 50 Pro Teardown Disassembly Phone Repair Video Review

[@thvfhjnvfji1395]

Bro I was seriously looking for this , I had inserted sim ejector tool by accident on the primary mic I thought it would've been damaged I've been searching on the internet for hours you literally just put the tension off of me thank you so much❤❤

[@PBKreviews]

you're welcome

[@daidalos1508]

One of the last brands who still hasn't added pulltabs for battery replacement. A shame

[@PBKreviews]

Yup

[@antsgamingvideosn2b]

Another missed opportunity by Motorola in my opinion. Even HMD’s new Pulse series uses pulltabs for the battery unlike “glue-it-down without handy pulltabs” Motorola.

[@TrainsandRockets]

I already bought it... Was waiting for disassembly video... 😂 Vapour chamber is quite big. And the metal frame conducts the heat directly to outside into your hands. Anyways, better to release heat outside than to cook inside like my Samsung did and turned screen green line mode on and also cooked everything in 5 m radius as soon as I turned on 5G...😂

[@PBKreviews]

👍 :)

[@adr23]

My moto edge 40 does the same thing...meh...not every phone same from brand😂😂😂

[@parveenyadav1205]

No vapour chamber only graphite layerse

[@tanmaymondal69]

thank u for this video, i bought this phone some days ago and wanted to know how it looks beneath, but i have a question, right under the power button there is hole, what's that for? is it a mic? if it is a mic where is it's contact pads? one thing to mention that moto did not designed the primary min hole properly, it can get punctured and the IP 68 rating will damage

[@TrainsandRockets]

It's a 3rd mic Probably It helps in Audio Zoom when you zoom in video recording. And don't worry about any materialistic tool too much. It will get replaced in 3 years anyway. Focus on how to use it properly with whatever u have.

[@PBKreviews]

You're welcome. You're right I did not notice that. It is an additional mic and is most likely connected via the flex cable for the power button and volume keys. Since I didn't pry off the screen (to avoid damaging it), I didn't notice that additional mic hole.

[@jai_hanuman7777]

I've tried but the sim ejector pin doesn't move into the mic hole it gets stuck in the very 1st place if anyone has tried then reply me the phone is safe from the sim ejector pins

[@jai_hanuman7777]

Primary mic hole & IP won't get punctured as it has 90° bend to it for the waterproof membrane

[@gujratibadshah]

Hey there...i have same phone u teardown here...when i press back panel ofy phone my sounds get distorted...what should be the issue?

[@KiranKumar-dv3fg]

Man I've been waiting for this for so long I'm using this phone rn and I'm so curious to see the teardown thank you so much man😊😊

[@withpiyashmozumder4069]

Bro is that a good phone for camera & regular Uses?

[@Aju0_0]

​@@withpiyashmozumder4069I am using the same phone cameras are great but there some kind of bugs in the camera app and you can feel some warmness in the frame part other wise everything is great and no frame drops experienced in gaming,great display too

[@Subhasis44597]

7:35 By the looks of it, the inner frame looks like aluminium.

[@gujratibadshah]

While recording audio.. third mic below power button is working or not??

[@Subhasis44597]

6:06 Good thing is replacement displays comes with frame attached.

[@Justahumanbeing72]

Please do a video of edge 50 fusion

[@justaguyjps]

I just bought one, and a little bit of uv tempere glue went inside the ear piece speaker. Although no effect on the sound, I'll still take it to service centre. I don't know much about phone. Will they change the ear piece speaker? Will it cost too much? Should I keep using it as it is?

[@PBKreviews]

Not sure the cost or what they would replace. Probably just a filter if anything.

[@newbsidian]

I wanted to see the cooling mechanism.. glad they used good amount of cooling paste

[@PBKreviews]

👍

[@zerotwo_.002]

Dang been waiting for this one.

[@PBKreviews]

👍

[@Wildcatchigga11]

Is there any gasket on top speaker grill or any water proofing tape?

[@Neeraj24]

Thanks to take us inside the phone.

[@tanultembhekar3719]

The uv glue is went inside primary microphone and it stopped working and then the shopkeeper inserted the pin there to remove blockage happen by glue now its working fine but will it affect the water protection ?😢

[@siddhantpadhy2749]

I too have the same question.. I accidentally inserted the sim ejector tool inside the microphone hole and now Iam worried

[@jai_hanuman7777]

I've tried but the sim ejector pin doesn't move into the mic hole it gets stuck in the very 1st place if anyone has tried then reply me the phone is safe from the sim ejector pins

[@jai_hanuman7777]

And the main thing is the waterproof gasket is at 90° to the hole i.e. even if u poke something in the chamber has a 90° bend to the chamber and in that perpendicular chamber there's water gasket which is impossible to puncture even if u pole something in

[@jai_hanuman7777]

If someone pokes the sim ejector pin in the mic area will the IP rating get affected? And how to know whether the water shield got damaged or not ? While looking via torch I found the mic hole at 90° and no mesh around

[@PBKreviews]

The secondary mic on top, no it won't get damaged or affected. The primary one on bottom, the filter/gasket is seated against the frame, so the rubber gasket/filter could get damaged possibly, but not the mic since the mic is seated below and would not get damaged.

[@jai_hanuman7777]

@@PBKreviews but while teardown look the gasket is perpendicular to the hole

[@nishalsingh337]

Micron stroage ic is cheap and not repairable but all over good i also use this phone

[@rakshith8762]

After repair does it work ip68

[@RoshanSingh-eg4el]

No!

[@DelhiDevils-o2u]

Bro, is the inside frame of this phone made of Plastic or Metal? I meant the silver painted area inside @6:07 also @9:11

[@kostas9826]

It looks as if the graphite film over the motherboard and the wireless charging part was removed before you did.

[@TrainsandRockets]

He forgot to turn on video maybe, then did again.

[@supnation]

Please do iqoo neo 9 teardown too 😊

[@tttt-vs8dk]

Sir i have a question since the battery module is similar to moto stylus model of 5000 mhz battery with the power cable at same location can we upgrate the battery to 5000 mhz to this model pls reply … thank you

[@PBKreviews]

No because this ones battery has 2 connectors not one. Also usually there are minor size differences in the size of the battery physically which might make it not fit in the battery compartment.

[@DipJyotiDeka]

The thermal paste application here will give any seasoned PC builder PTSD.

[@ISBE91]

The word "motorola" would trigger PTSD to any consumer who owned a device from them

[@bezbi1988]

i just inserted the sim card key into the microphone hole, they are close to each other. did i destroy the water leak certificate? the microphone is working

[@PBKreviews]

If its the bottom one, you wont damage the mic but can damage the rubber gasket/mesh filter for the mic. But if its the top mic hole, then you have no issues.

[@bezbi1988]

@@PBKreviews it's the one at the bottom. if I damaged it, I no longer have water resistance?

[@normalguy370]

It has magsafe?

[@Mrinmaykalita-xo2fo]

Please do motorola g64 5g teardown too

[@omprakashsaw4284]

You have buyed it haa..

[@hiramondol6384]

Motorola edge 50 fusion disassembly plz.

[@jai_hanuman7777]

I've tried but the sim ejector pin doesn't move into the mic hole it gets stuck in the very 1st place if anyone has tried then reply me the phone is safe from the sim ejector pins

[@mandarkanade5796]

Nice & information ❤

[@PBKreviews]

👍

[@Sourabh_up11]

So according to your opinion is it better to buy this phone or not? 😢😢😢

[@Smzxe]

Go with Iqoo 12 far better than this moto junk

[@kunjupulla]

It really depends on what you are looking for in a phone. Iqoo cameras are not even worth calling as junk. They're only good for performance under budget. If you want an all rounder then don't go for iqoo

[@Vsk-xd8nc]

​@@kunjupullatf are you yappin about? Iqoo 12 has really good camera's for both photography and videography. Go check the reviews dude

[@mfifzd]

Sir please make a video for moto edge 50 fusion

[@joyshah414]

in white colour do we get glass back?

[@Aju0_0]

No it's kind of plastic other two is vegan leather

[@VivekSingh-ih3zg]

How are Motorola phones selling in US?? And what's the pricing of that phone there?

[@sabkaBaap007]

It's costly in the US

[@omprakashsaw4284]

Did i missed the copper cooling chamber

[@PBKreviews]

You can see it @9:49 in the video

[@arbazkhatik4878]

Nice video

[@siddhishaw5821]

Can you teardown moto edge 50 fusion??

[@PBKreviews]

I will look into it.

[@盾神京矢]

The front camera looks really large (in terms of a front camera).

[@PBKreviews]

👍

[@Getulio_Per]

Please disassemble the "Oukitel WP33 PRO"

[@PBKreviews]

Ill look into it

[@mateusarevalo4864]

Desmonta o huawei pura 70 ultra 😅

[@Rofamoni]

very nice

[@PBKreviews]

👍

[@ganapathykumaravelu4770]

68w charger PD charger?

[@RohitRanjanSingh2308]

Yes, it has a pd charger.

[@IBRAHIMROTERWOLF]

Good bro

[@PBKreviews]

Thanks 👍

[@jesuspuhwillreturn]

😂😂😂 possible to fix cooling ac or air cooler inside, coz too much heating while charging and usage of apps more then 20 mints?

[@sudhakar7889]

That's bad for such efficient processor.

[@asrafahamed5504]

True bro

[@asrafahamed5504]

More heating

[@球王-q3p]

Hi, is it bitcoin wallet friendly? I mean can I freely install bitcoin wallet on that phone?

[@ajaypatidar1574]

battry is only 4385 mah

[@PBKreviews]

there is a typical and rated capacity

[@Nimesh_Rs7]

8:46 "typical capacity: 4500 mAh"

[@rakeshbose8927]

😊😊

[@THE_DEVOTEE_OF_LORD_RAM]

No efficient colling system

[@Thenikkvlog55]

Vivo t3

[@pimpinal004]

Nice

[@PBKreviews]

thanks

[@ayshakhatun2930]

Arey dude try to Samsung Galaxy M55 5G teardown test durability test now hurry up

[@sad_video_439]

Battery 5000mah bol kar 4385 mah ka de Diya🫡

[@THE_DEVOTEE_OF_LORD_RAM]

4500

[@willian4428]

trash vibration motor.

[@mojumder]

Wireless strip 😢

[@Rjteam04]

Realme 12x 5g disassembly

[@PBKreviews]

I'm not sure if I will be doing that one yet. Will look into it.

[@PopatJagtap-k6w]

Motorola edge 50 fusion Dsessable

[@Tufanarmy-i8z]

Hiiiiiiiiiiiiiiiii

[@PBKreviews]

Hello

[@BigEightiesNewWave]

Awful design, and flimsy. MOTO overcharging for garbage phones. TY to Samsung for design my wonderful phone.

[@Borngaming2869]

Only 4385mah😂😂😂😂😂

[@Nimesh_Rs7]

8:46 "typical capacity: 4500 mAh"

[@BigEightiesNewWave]

No rating, must have been in a negative number, since MOTO is awful.

[@Rofamoni]

palestine❤❤❤

[@omprakashsaw4284]

Moto phone doesn't look premium form inside what ever the price of moto is....

[@PyrozManSK]

thx for great video

[@PBKreviews]

You're welcome

[@Wildcatchigga11]

Nice

[@PBKreviews]

👍