How To Install Multitv On Nasco Satellite TV

How To Install Multitv On Nasco Satellite TV
#satellite #multitv #pbtecknology
Get More Satellite Installation Videos Below;
• How To Connect Multipl...
MULTITV INSTALLATION
• How To Get Multitv Ch...
DSTV INSTALLATION
• DStv Extra View Instal...
STARTIMES INSTALLATION
• How To Install Startim...
GOTV INSTALLATION
• How to scan GOTV decod...
DSTV EXTRA VIEW INSTALLATION
• DStv Extra-View Instal...
DSTV INSTALLATION WIZARD
• DStv Installation Wiza...
#dstvtv #gotvinstallation #multitv #pbtech #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck
_____________________________________
LINKS
Visit The WEBSITE for more Info:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
How To Install Multitv On Nasco Satellite TV;
• How To Install Multitv...
PBTECKNOLOGY
/ pbtecknology

[@EricDunyah]

Wow man you good, I just fellow ur steps and I'm able to set my nasco tv. Thanks man.

[@pbtecknology]

You're highly welcome ❤️

[@RandyOfori]

Thank you ❤

[@ChristodeaGamadey-mi8jm]

Hi my Nassco tv I don’t get the dish setup on the source How do I go about it?

[@pbtecknology]

It's available, keep searching it from the menu.

[@JaneA321]

Mee too

[@leksideu]

Can dstv dish work with my nasco t.v decoder as well... If yes please assist with the video

[@agyemolejohannes6760]

Hi Please how do I do the scanning for a Nasco decoder that has received installation before and has now been transferred to a new location?

[@maryarthur8296]

Please thanks to you I've been eble to install channels but my problem now is my TV volume is not coming all of sudden, please help me.

[@kwasidanquahagyepong1612]

Very helpful

[@pbtecknology]

Much love ❤️

[@awudumusah2360]

Please I want to ask. For example: I can get the following Channels on Amos 17 satellite; Songhai TV, HIJRAH Nigeria, Farin Wata; TP/SR - 11717/30000 V If I use the above Transponder and Signal rate together with blind scan option, will I get channels available on other TP/SR like 11754/30000 V too? I’m asking because there are some channels on 11754, 12333 with the same symbol rate of 30000 V that I want as well.

[@barsontontiedawuda2545]

Hi, please how do I get peace tv during my scan

[@pbtecknology]

You need to get a stable signal for the Peace TV before you can get it on your decoder through scanning

[@awudumusah2360]

@Pbtecknology. I’ve been able to set my dish (Badr 7 26” E with TP/SR: 10970/27500) settings. I can see some channels like AREWA24, Sunna TV, Tauraruwa, but they’re locked. How do I unlock them please?

[@rasheedkamoru5739]

Pls what if using Gotv antenna 📡 in Nigeria can I get those channels??

[@pbtecknology]

You'll need a (Free to air) satellite receiver

[@williamsaddo4370]

Please am using protect Tv and after scanning, I got plenty channels but the only Ghanaian channels are Angel tv and joy news. The rest are foreign channels. Pls can u help me get adom tv and the rest

[@pbtecknology]

Perform manual scan with a different satellite name using the MultiTv frequency ( 12525 V 30000 )

[@gideongyimah217]

I’m using the DTV option (not Satellite) and I’m getting “NO CAM MODULE” whenever I select a channel (e.g TV3)

[@awudumusah2360]

Hi. Please on what satellite can I get more Islamic channels and their TP/SR as well? I’ve set my dish and it’s on Badr 2,3,4 satellite and I can see AREWA24, Farin Wata, and Sunna TV but they’re all locked. Is it possible that I can get those channels unlocked if I use a decoder instead of the built-in satellite on my TV which is similar to the one on Nasco TVs?

[@pbtecknology]

You can get Peace TV on( Badr sat 26.E) TP [ 11996 H 27500 ] The built in satellite plasma TV is the same as an FTA decoder, the only difference is that since the FTA decoder is designed to perform satellite obligations, it's can get you more channels than that of the plasma TV. Most plasma built-in, have a signal problem. You can't get more than 60% or 70% of the signal quality, which limits you from some of the available FTA channels. I will try and create a video on how to track some of the Islamic channels. Bless Up❤️

[@awudumusah2360]

@@pbtecknology thanks bro. You’re right. I’m using skyworth 32” TV and the satellite settings page is the same as that of the Nasco TV. Also regarding the signal, when I track the signal, I don’t get even up to 50%. After scanning and I get satellite channels, the highest quality signal I can get is 36%. So I will try and get a satellite decoder and see if it will make any differences.

[@eugeneowusu3033]

I got only french channels.. the satellite names are Express AM1, Turksat 2A,3A and INTELSAT 902 . I can't find Hotbird or Astra on my satellite list.

[@pbtecknology]

Change the dish position using the same frequency to get the signal at a different angle

[@justiceennim784]

Please what if you re using antenna

[@pbtecknology]

Select the DTV from the Source and go back to the settings menu to scan after getting enough signal. With the Local Antenna channels, you have to Select ATV from the Source.

[@prophet_amanorabf7751]

Can I just add just transponder and get the channel?

[@pbtecknology]

If only you a stable signal from the satellite dish

[@evansosayande6972]

I cant found Astra 2a/b/ on my own i need multi tv What can i do

[@pbtecknology]

Add the MultiTv transponder (12525 V 30000) in a different satellite folder to proceed

[@evansosayande6972]

Have done that but now the strength is not even counting

[@tamakloe66]

Where do I get factory reset on my nasco tv?

[@tianaborkie5376]

pls I'm having a problem i was deleting some channels and it deleted all my remote the numbers has clean

[@pbtecknology]

Rescan

[@oto-obongvictor2723]

Please what's the frequency for tracking church channels on free to air

[@pbtecknology]

Which Channel exactly do you want the TP

[@OheneSolomon-k6f]

Please my dish is not multitv so how I will do because all channels has been deleted

[@donkorprince289]

Please do a video on how to track for christian channels on badr 26

[@danielahanson5709]

Please I'm using nasco 43 led I have reach that polarity section after I did it I pressed enter and it is not coming

[@danielahanson5709]

It's a strong satellite

[@pbtecknology]

Is it a new TV, or you're trying to scan

[@danielahanson5709]

@@pbtecknology not a new tv

[@danielahanson5709]

Teach me how to unlock my scrambled dtv channel

[@pbtecknology]

Some Channels need software to unlock dear

[@tytuztellem3741]

Please my tv the Satellite names has been deleted how can I get it back??

[@appiahkubidivine6616]

Please I'm getting existed transponder and the 113 in the transponder session has changed to 114 Please what should I do I need help

[@pbtecknology]

Reset to Factory Defaults

[@ibna9087]

My signal is poor 25 or 0 How do I go about that please

[@pbtecknology]

Adjust the satellite dish to get a stable signal

[@achamogilbert3391]

Please what happened when you install channels on a dish of 60cm and all the channels are talking but no image display on your screen I need help

[@pbtecknology]

Make sure the channels are not Audio channels. In most cases check the signal quality, without enough of the signal, some Channels can't display video. The last thing is the decoder version. Some old Decoders can't play HD channels. ❤️

[@eugeneowusu3033]

How can i get English premier league or premium league matches to watch for for free on satellite television.. Am in Ghana

[@pbtecknology]

You'll need either a Bisskey/Software depending on the channel security. * A new dish / LNB have to be installed in addition to your current signal.

[@eugeneowusu3033]

@@pbtecknology Are you in kumasi?

[@pbtecknology]

Tema

[@evansboadi1908]

After the epg is selected i don't get a good signal

[@sm.arthur575]

All my satellite have been deleted. Any help

[@pbtecknology]

Go to the satellite page in the menu and press on the (add) button to create a new satellite folder. * Use any name, select the degrees (any number from 20 - 60). *Pick either E(east) or W(west). Save it and add the Transponders

[@sm.arthur575]

@@pbtecknology thanks 😊

[@pbtecknology]

You're highly welcome ❤️

[@AlexanderAkwasi]

Please am not getting Adom tv joy prime

[@pbtecknology]

Add this frequency ( 12525 V 30000 ) to scan

[@tianaborkie5376]

the satellite has deleted i only have something like this(01/09)ku I'm not using decoder it only the dish

[@pbtecknology]

Perform rescan

[@florenceadjei5181]

Please how do I scan my strong satellite

[@kwadwomarfo3912]

Please I've a problem with satellite channel

[@electricexelence]

I am finding it difficult to scan my digital tv

[@pbtecknology]

Get a signal on your antenna and select terrestrial option from the menu to perform Auto Scan

[@crespoemmanuel]

How to jw broadcasting

[@jacobwilsonsey8504]

With my scan mode I have only network and default

[@HarunaObirigyha-bk6ho]

Hi

[@tianaborkie5376]

pls what about the data

[@appiahkubidivine6616]

Please I'm getting existed transponder and the 113 in the transponder session has changed to 114 Please what should I do I need help

[@pbtecknology]

Reset to Factory Defaults

[@awudumusah2360]

I think you should go back to the transponder list and you would see that the transponder you’re trying to add already exist in the list. So you can select it and then set your dish to get a good signal.

[@lloydwinga]

After the epg I don't get any signal at all