PC DMIS common datum step by step

No music video here : • PC DMIS common datum s...
Link to my blog : xyzarchitect.blogspot.com/
In this video I explain step by step how to make a program in PC-DMIS and generate a common datum from a plane and a cylinder. Please feel free to give feedback.
Disclaimer : I am not a PC-DMIS expert, I have above basic knowledge, but I do not work on a daily basis in this software. However I will learn as much as I can on the way, so stay with me and we will learn together :).
Music credits :
Last Summer by Ikson: / ikson
Music promoted by Audio Library • Last Summer - Ikson (N...

[@soynuevo.1048]

insane release, thanks!

[@academicofficeadmin4602]

BROTHER, YOU ARE THE BEST!!! You oooh really helped me!! THANK YOU VERY MUCH!

[@MANOJPATEL-hw6cy]

You are really good. You have very good teaching power.

[@xyzarchitect]

Thank you! 🙏

[@brayanfortunato9963]

GOD!!!My broo

[@phongta4154]

Thank you very much I like you add claim on this part.

[@kingtimer8212]

Thank you for sharing this tutorial

[@necronix8332]

That was great. Thank you.

[@ashalchettri7238]

God, I'm glad I found your video that helped me

[@isuruharshamal]

Worked, thx

[@VictorHernandez-nt3tw]

Great stuff! Explained well and you do a lot better than people that are raised knowing English. Thank you for explaining this in English and for all your effort@ ❤❤❤❤

[@martincacer7033]

A great explanation, thank you for share this video, and keep doing more.

[@xyzarchitect]

Thank you also for your appreciation!

[@tibornovak8287]

thank you Sir

[@mouhcinetammal5128]

J'attends votre retour et merci

[@xyzarchitect]

Hello, I translated with google. What do you want to know? And, are you speaking English?

[@ilyasskarouach9613]

Thanks for the explanation, could you please get rid of the music as it's distracting. Thanks again

[@user-vl8dy1os6r]

多发布一些 PC-DMIS 的视频教程。

[@wojciechpiekarz5923]

Thx for the great video, could you explain Iterativa alignment too?

[@xyzarchitect]

Will do in the future for sure 😉

[@mouhcinetammal5128]

Bonjour tu peux aider moi pour comprendre la programmation pcdms et merci

[@tomekp1988]

Nice, but acc. to ISO5459 you should to measure datums as a tangential elements.

[@xyzarchitect]

Agree, Calypso has an option that does this by default. But if you measure acc ISO 5459 you will not have repeatability

[@pmungliful]

how to do alignment with 321 when three planes are not perpendicular to each other. For that datum target points defined 3 points for primary, 2 points for secondary and 1 point for tertiary. ? thank you

[@xyzarchitect]

321 alignment is actually alignment with features plane ( formed from 3 points), line ( formed from 2 points ) and a point, all of this elements has to take 6 degrees of freedom, 3 translations and 3 rotations from XYZ axis, keep this in mind when you do alignment, all drawings has to respect this rule, if they do not then they are with errors. Keep an eye on the control frame from the drawing, where the datums are, they tell you how you make the alignment.

[@pmungliful]

@@xyzarchitect okay Sir. Datum on drawing is specified with datum target points in the manner of 321 and the points for line is not in same plane. One is on stepped flat feature of part. And last point is on contour surface. Can through some light on this doubt? Thanks alot🙏

[@xyzarchitect]

Contact me on the XYZ Architect Facebook Page, maybe you can send me some more info so I can understand better the problem, and help if I can

[@pmungliful]

@@xyzarchitect thank you Sir

[@pmungliful]

Sir please share me your email id. If it is okay

[@Abcd-zk5so]

Could you please best fit alignment video share.

[@xyzarchitect]

I will make a video with Best fit alignment in the near future for you :)

[@darkentey]

You could just use common datum tool and create common datum out of two datums.

[@xyzarchitect]

Correct, you can do it both ways. I presented it this way, because you have more control and see step by step what the software is doing.

[@pinoypyroguy]

Subs 👍👍👍

[@uguraydemir9921]

Hocam merhaba size bir sorum olacak yardımcı olursanaız sevinirim, Teknik resimde 5 ayrı datum var A,B,C,D,E ben şimdi CMM de 3-2-1 yani aligment nasıl yapacağım? Datum A dan düzlem,B den çizgi,C den nokta veya çap mı yada bu 5 datum dan istediklerimi kullanabllirmiyim

[@xyzarchitect]

Hello, find in the drawing what datums constructs the main alignment. Search the tolerance frames, usualy it is ABC if it is in that order, but the frames or in the right below corner of the drawing you can find the info. If you have frames with only 1 or 2 datums inside, then ask the mechanical designer where is the main alignment.

[@hoshyargautam9317]

Hello sir I have a confusion in measurement can you help me??

[@xyzarchitect]

Sure, contact me via my Facebook page. And if I can help you I will.

[@hoshyargautam9317]

@@xyzarchitect Oh sorry sir but I am not using Facebook...what can b a other way if u can suggest

[@xyzarchitect]

[e-mail] - contact me via e-mail.

[@phongta4154]

Thanks a lots I would like you make more video show us how to change black points to red points, please

[@sarathprabakar6557]

Compared to zeiss its bit hard to do programming..

[@xyzarchitect]

Yes, it is, but I recommend learning on harder software when you first start your measurement carier, tou will hit some walls and find out stuff that on Calypso you have due to user frendly platform.

[@jakeegley1473]

Thanks. Could do without the music

[@nothingelse3166]

.

[@caseys9108]

The background "music" is too loud and WAY too annoying for me to listen to this one second longer.

[@xyzarchitect]

I know, sorry. It's an older video. I was at the beginning with my KZbin channel.

[@xyzarchitect]

And I just uploaded this video again today with no music. Thank you for the feedback!