Pcmflash edc17c45 in bench full read out.without opening

[@bestwreckauto1158]

Thanks for a very informative video. Do you need to use a 120 ohm resistor between CANH and CANL?

[@waldemarfechtel1644]

With Sm2 interface not.

[@s1tuningsheffield62]

hello sir i took your advise and got scanmatik with cable and module 71 but i can not get it work on a edc17c49 can i ask where you get the pinout diags from and is it best to run on 12v or 14v thanks sir

[@s1tuningsheffield62]

[e-mail]

[@waldemarfechtel1644]

@@s1tuningsheffield62 I by it in pcmflash forum from Russian friends. You can use trash data manual

[@t8deer952]

How you connected the wirings to that ECU? How did you know the location of each cable and how to edit GPT1 and GPT2 Thanks

[@waldemarfechtel1644]

Got help files from pcmflash forum or dimsport manual

[@t8deer952]

Regarding the 12Volt supply, how did you connect it with the cable? Because it has postive and negative while the the scanmatik has one cable for 12volt the circular one

[@shefi14]

How to find out what edcxxxx is this ecu or that ecu? So if i want to read an ecu and i know is edc17 but I don't know the exact edc17xxx is, how to find, because without knowing exact what edc17xxxx i don't know which pinout is needed.

[@waldemarfechtel1644]

Bosch ecu search. Type in the Bosch nummber

[@rebinrebin8993]

Hi Frend wer you buy scanmatik ?

[@waldemarfechtel1644]

Hi! It was by from ebay and it originally

[@rebinrebin8993]

S'il vous plaît vous pouvez partager le lien moi aussi je veux commande une . Et le interface scanmatik et le usb pcmflash ensemble original et sa coûte combien merci

[@waldemarfechtel1644]

@@rebinrebin8993 Englisch please

[@rebinrebin8993]

@@waldemarfechtel1644 brother scanmatik + usb pcmflash original all active for haw much but original all kit ? Ty

[@jorgetrula1462]

Dear, I need to replace an ECU on 2008 Audi Q7 4.2 FSI, the engine control module is Bosch MED 9.1.1. Can this tool do the complete job?

[@waldemarfechtel1644]

No. Use ktag bdm for med ecu. (clone with ktag works 100%for this Med9.1.1)

[@waldemarfechtel1644]

Pcmflash don't read this ecu type

[@jorgetrula1462]

@@waldemarfechtel1644 Ktag can do the complete job? read & write? Two people told me after clone with Ktag is need a special function that makes the cloned ECU to start. after copying I would have to use tango or other equipment for the cloned file to work. But I'm not convinced. you have already cloned this type of ECU

[@waldemarfechtel1644]

@@jorgetrula1462 read ktag full backup, need have exact same Donner ecu. Whrite full backup in it and car will start. 2008 car will starts.

[@jorgetrula1462]

@@waldemarfechtel1644 Ok, full backup, so I don’t need to worry about EZS-Kessy, and eeprom separately?

[@milosblagojevic1196]

How to remove protection sir? Thanks

[@waldemarfechtel1644]

Wich protection?

[@milosblagojevic1196]

Write protection for ecu? Thanks sir.

[@waldemarfechtel1644]

Obd unlock? When do bench don't need make unlock. Read and whrite bench is very easy

[@milosblagojevic1196]

@@waldemarfechtel1644 i read on bench edc17c59 so no need to unlock ecu to writing dpf off even is write that ecu is locked? Pasword readed from ecu on bench, so asume that need write in bsl mode for unlock? Thanks sir, this is last question.

[@ramone9853]

Where on the pcm model number

[@waldemarfechtel1644]

@@ramone9853 hi! What you like no now? Bench Modul is 71

[@AutoDiag_]

What cable for connection do you use?

[@waldemarfechtel1644]

From tuning energy.

[@cangungor090]

Where did you get the power voltage regulator?

[@waldemarfechtel1644]

Ebay :labor Netzteil

[@cangungor090]

@@waldemarfechtel1644 Wie viel Strom und Spannung, wenn Sie am Steuergerät arbeiten

[@waldemarfechtel1644]

@@cangungor090 13,4 reicht. Das hat das Auto on etwa auch wenn es läuft.

[@ju1c3washere]

using module 71 ?

[@waldemarfechtel1644]

Yes this is Modul 71 original pcmflash

[@ju1c3washere]

@@waldemarfechtel1644 Very nice thank you. Any idea how many cars can modul 71 do? Only BMWs ? Can VAG or Peugeot using 71 module? I know that there is some OBD module for VAG which is easier to use without taking ecu out, am I right?

[@waldemarfechtel1644]

@@ju1c3washere most of cars are supported but not all. With the highest tp root will not works. On pcmflash homepage can see wich are supported

[@ju1c3washere]

@@waldemarfechtel1644 What tool do you suggest ? Scanmatik or tactrix? I saw pcmflash being used with both of them

[@waldemarfechtel1644]

@@ju1c3washere scanmatic 2 pro, because don't need have powerbox for boot read with Modul 53,scanmatic works with many OEM. Software. Like odis, bmw, xentry and many more

[@shefi14]

Can work original scanmatic or taxtric with PCMflash clone?

[@waldemarfechtel1644]

Scanmatic original

[@ScanmatikEuropeSL]

@@waldemarfechtel1644 Right name is "Scanmatik"

[@waldemarfechtel1644]

@@ScanmatikEuropeSL yes.but he ask about clone tool

[@miguelangeldel6394]

What is exactly needed? Could you list it with links? Thank u!

[@waldemarfechtel1644]

You need pcmflash +Modul 71 +ecu cable+scanmatic pro 2

[@gligorchochovski1941]

@@waldemarfechtel1644 where to buy this ecu cable?

[@waldemarfechtel1644]

Ecutool.com.eu or tuning.energy/en/blog/new-year-2020/

[@fabiuzuniversaltunerecudde726]

1 million dollar question... If write this file flash 4Mb and eprom 64kb in other edc17c45 car start or not? It's able to clone full ecu data pcmflash in egpt

[@waldemarfechtel1644]

Clone possible. Or we can isn by ecu dump

[@fabiuzuniversaltunerecudde726]

@@waldemarfechtel1644 clone possible whit egt connection or open ecu in bsl boot mode? Whit ktag this job fault car won't start

[@waldemarfechtel1644]

Not with ktag

[@davidgomes6035]

Work in Delphi 3.7 ????

[@waldemarfechtel1644]

From wich car? Actual pcmflash not support Delphi bench read.

[@jmbmwmiami]

How can I contact you?

[@waldemarfechtel1644]

[e-mail]

[@waldemarfechtel1644]

What you like to now?

[@jmbmwmiami]

Receive a tutorial from Pcmflash

[@waldemarfechtel1644]

@@jmbmwmiami it's very easy

[@ДмитрийБарковский-ш6и]

EDC17CP45!!!

[@s1tuningsheffield62]

Will the mongoose pro work aswel ac the scanmatic

[@waldemarfechtel1644]

Not with Modul 71

[@s1tuningsheffield62]

What about module 70 as I am going to work on some edc17

[@waldemarfechtel1644]

@@s1tuningsheffield62 Modul 70 works with other interface

[@s1tuningsheffield62]

Thanks your a gent and great videos

[@s1tuningsheffield62]

Can Pcmflash read this ecu via obd

[@waldemarfechtel1644]

No tool can read this ecu by obd. Ony some with virtual read.

[@kotov2570]

@@waldemarfechtel1644 www.autotuner-tool.com/ru/compatibility

[@waldemarfechtel1644]

@@kotov2570 autotuner Aldo only vr read on this ecu or bench mode

[@meghna233]

Hello Friends you are selling this machine?

[@waldemarfechtel1644]

Im not seller .ecutools.eu/chip-tuning/pcmflash/

[@PedroGonzalez-yr6xd]

Hi how are things. Thanks for sharing your knowledge. I am a loyal follower and I would like to know if you can sell me the PINOUT files to Use PCMFLASH module 71. Thanks for your attention.

[@waldemarfechtel1644]

Hi. I by it in pcmflash forum. 50euro

[@PedroGonzalez-yr6xd]

@@waldemarfechtel1644 Hello how are you I already searched the forum but did not find anything regarding the pinout. Can you sell me a copy of your files please.

[@LUCIANOQUADRANGULAR]

MUITO BOM!