Peek-a-boo Glitter Wine Glass

• A-Girl-Of-Many-Creations
• m.facebook.com...
• Instagram: agirlofmanycreations
Mod podge: www.amazon.com...
Electrical tape: www.dollartree...
Vinyl: expressionsvin...
Glitter: www.michaels.c...
Wine Glass: Dollar Tree
Video edited with PicPlayPost

[@dyte9180]

I love the hair tie idea to make the line!!!

[@lakegirlroxy9852]

Beautiful!

[@mikkimouse1762]

Wow. Awesome job and simple video. This is gorgeous!!! Thank you!

[@munecalinda28]

Hair tie that's BRILLIANT. THANK YOU. love thre video.

[@AvonLadyWendy]

Hello, beautiful glass. Thank you for the share!!

[@ShalamarEntertainmentGroupLLC]

Now I learned a lot from ur video!!! Thank u very much!!! I am feeling waaay more confident about my creations now...and ur tips are spot on!!! First time crafter-lifetime creative✌🏾💜🙏🏾

[@georgettaclark3628]

Love it

[@carmendelacruz4947]

Great video. Thank You 💖

[@sharonabrom2352]

I Love this! Done this a long time ago but I've learned something New watching your video. Thanks for Sharing 💕

[@yariste8644]

Perfect! Can't wait to make one!

[@sharlondaharrison5946]

Amazingly Beautiful 🤩 😍

[@THEQUEENSAMPSON]

Thanks for the video. I will be trying this

[@WayGemstones]

Really cool...

[@kathyhalvorsen4357]

If you just fill the glass with water to where you want the line and then put the tape on it, you have a straight line and then dont need to mess with the hairband

[@cdmanor777]

I love this process too. It was very helpful when I learned of it.

[@haleymattucci9645]

Kathy Halvorsen I like the headband method as well after the water. That way I can move the glass around without spilling water.

[@soraidazavala]

I was expecting you to take the hearts off lol.. I was literally nervous tbh...but this is AMAZING!!!

[@carmendelacruz4947]

Soraida Arevalo I was as well 🤦🏽‍♀️😂

[@soraidazavala]

@@carmendelacruz4947 I'll probably do one for me by peeling the hearts off and see what if looks like.. I might have to get epoxy though since the modge podge or a spray sealer might make it cloudy

[@gaillockeyakathemessycraft658]

Soraida Arevalo so was I. I thought then you would see the gold hearts in the green inside 😀😀

[@ShalamarEntertainmentGroupLLC]

Girl🤦🏾‍♀️when she was unwrapping the tape I was just watching with bated breath!!!😂😂😂the suspense

[@ShalamarEntertainmentGroupLLC]

@@soraidazavala her trick with the plastic wrap🙏🏾✊🏾genius!! I was making some flower vases for my bday last nigh, first one I went to seal I was like🤔🤔🤔and the rubber band ruler...so many neat little tricks!!! I cannot wait to use them

[@ms.c3977]

Beautiful

[@eidysoza3973]

Hi I love your video. What size did you make the hearts. Thank you is advance

[@edwinaburnett7555]

Can gloss mod podge be used or do you have to use dishwasher one

[@karenro6149]

nice share! I tried MUKONAY wine tumblers, it works great and looks pretty elegant 😊

[@heatherlee4144]

Maybe plastic wrap BEFORE mod podge would be less risky!!

[@lilliangarza4748]

Do you use the spray after the cup is done? Also, does the glitter feel smooth with the spray? Or is it a rough surface?

[@TheCelena2972]

Where did you get the decal stickers? I love it!!

[@jenniferhogan1226]

Not mine but you make them with vinyl and a cricut machine

[@lucrishamcallister410]

Dollar tree

[@journeytosoulistapathtohea4415]

What size are your decals please this is awesome

[@tammyrafuse2169]

Why do you seal it with clear coat instead of mod podge ? Doesnt mod podge seal it?

[@paulapeace1]

I'd like to know the answer to this too. Why did she not answer?

[@alyssabrown-carleton6173]

Mod podge can dull the glitter

[@karenfeil2821]

What is the purpose of sealing each layer of mod podge? Is it just so the glitter doesn't move?

[@haleymattucci9645]

Karen F the purpose is so the glitter sticks to the glass.

[@ashleytaveras4671]

Do you do a layer of epoxy or no

[@TXRoze]

Hello I really loved your design and will be trying something similar. What kind of modge podge are you using?

[@yoly507]

Dishwasher safe

[@candyjordan946]

Where do we find the stickers for the peekaboo or are they just any random sticker

[@cheyr49]

Any sticker or vinyl.

[@Gemgemz26]

What is the sealant you used please?

[@qianafinney8911]

Where do you get your stickers from?

[@ojejewels3495]

Why don't you have caption on your video, sometimes I dont have headphone and I can read the captions. Maybe next time you can add it on. Thank you so much for sharing.

[@MISSCUPCAKE71]

Do you let it dry in between the two coats of the same color ?

[@jenniferhogan1226]

Not my post. But yes you would at least 2 hours between coats

[@meganh9203]

Do you epoxy the glitter on bottom, or just leave it as is?

[@haleymattucci9645]

no epoxy. only a spray sealer and it secures the glitter enough it won't wash off or come off on hands.

[@mrcharliewebb]

@@haleymattucci9645 I didn't see that sealer used in the video, did I miss it? When do I use the spray sealer? And do I only use once when all done?

[@haleymattucci9645]

charliesmelody webb the sealer is Rustoleum Crystal Clear Enamel. You use it after your done with the second coat of each color.

[@lindamattosfranchinikeer377]

@@haleymattucci9645 So I was wondering how to clean the glasses without losing the glitter & ruining the glass. Also, does the vinyl wording tend to loosen up after using several times? Great video, this would be my first attempt. Thus all the questions. Thanks for your clear instruction.

[@lindyglennon9657]

Can you drink out of these? Handwash?

[@matthewjones1056]

I enjoyed your video, how long before coats should you wait. Do you wait for each coat to dry completely or just a few mins

[@haleymattucci9645]

I wait at least 20+ minutes between coats. When it’s warm weather, I’ll let it sit outside to dry quicker. In colder weather, I normally have a heater going. So it will sit by that to dry too. But I always wait a minimum of 20 minutes before doing another coat.

[@matthewjones1056]

@@haleymattucci9645 thanx your the bomb 🙌🏾🙌🏾🙌🏾🙌🏾

[@lucrishamcallister410]

Did you mod podge the decal also ?

[@haleymattucci9645]

No, just the glitter. The vinyl is permanent.

[@ArJanai]

Where did you purchase the hearts to show the color on the inside?

[@kathyw.3163]

Great video thanks ! How does the glitter hold up during washing?

[@queenhustle2916]

Items like this, are to be hand washed.

[@ardentlyearnest]

What sealer are you using?

[@haleymattucci9645]

rust-oleum Crystal clear enamel spray

[@TCJ24116]

@@haleymattucci9645 may I kindly ask how these held up using that spray instead of epoxy? These are beautiful!

[@lilliangarza4748]

Abby Lea following.. I wanna make one but I want to know the difference between the spray and epoxy

[@jenporter6676]

Is the rust oleum safe to use? I am trying to find a water proof sealer but not sure how safe this one is?

[@cdmanor777]

Thank you miss lady for sharing. I've just been asked to do a duo color glass and only seen this process about a year ago so I'm glad I saw this video. It is very helpful. Thank you again. The glass turned out really pretty. {What font/size did you use for the wording?}

[@mars5181]

Do you seal with epoxy?

[@cierraanderson7624]

Do you seal with epoxy or mod podge?

[@angelritter8044]

Where did you get the heart from

[@Nickynicarter]

Is this regular vinyl?

[@haleymattucci9645]

651 vinyl

[@shirleymyers777]

How do you seal the decal on? Does it just stick well enough even through washings? Thanks.

[@mzlene1]

Shirley Myers good question

[@jenniferhogan1226]

She used 651 vinyl so no need to seal. Plus vinyl isnt really ment to be sealed it needs to beable to breath. However when working with vinyl on glass you should clean the area with rubbing alcohol first make sure it dries then apply. Also it is not dishwasher safe and do not soak it or it will fall off

[@crystalnavarro5846]

You can epoxy it too ..

[@robbiewinde9490]

In between the 2 coats of green or champagne do you seal and then add layer of modge podge then do second coat of color?

[@haleymattucci9645]

yes, I seal between the colors. after I do 2 coats of glitter of one color, I'll seal it. Then Mod Podge/Glitter again. Seal your final coat of 2nd color glitter.

[@sasham2335]

Can it just be sealed with more mod podge?

[@aprilJ0208]

What kind of Vinyl do you use to make the decals?

[@haleymattucci9645]

it is oracle 651 vinyl

[@aprilJ0208]

Does it have to be the mat or can it be glossy

[@haleymattucci9645]

@@aprilJ0208 the vinyl? it can be whatever kind you want to use :)

[@aprilJ0208]

@@haleymattucci9645 Thank you :)

[@stephystuffe]

How do you put the two different colors on one transfer sheet

[@haleymattucci9645]

it is with glitter. no transfer sheets involved.

[@sealinalashelle5126]

You cut out a large piece of transfer paper and add each design to it one at a time.

[@nancygeiger8460]

Do you spray it with sealer right after the first coat or wait until it dries, and you add another color?

[@haleymattucci9645]

nancy geiger I wait till I’m done with 1 color before spraying

[@smhernandez18]

What sealer are you using

[@haleymattucci9645]

rust-oleum Crystal clear enamel spray