TUTO - Pruning shears - C3X | PELLENC

[@CowboyLeo1900]

👍👍👍👍👍

[@PellencGroup]

👍

[@BIeak1]

Still so loud ;-(

[@PellencGroup]

Still so powerfull! Our ball-nut technology delivers high power and increased tool robustness, albeit with a slightly higher noise level.

[@BIeak1]

@@PellencGroup Yeah I can confirm that even my older Pellenc Vinion is powerfull enough for apple orchards and lasts at least 1-2 days with the 250 battery. Too bad that my charger no longer works... so I consider upgrading. What is it about the maintenance, you need to regularly grease over the lubrication nipple and only grease between the blades when changing with new blades? Or has both to be done regularly? It seems you provide 2 different lubrificants/greases with the C3X. Also, what charger is delivered with the C3X? Couldn't find that in the English manual, only that 2 batteries are included. Thanks for more informations!

[@PellencGroup]

Thanks for your feedback, you can always buy a new battery or have it repaired by your dealer. Regarding maintenance, you need to grease the tool regularly (depending on use) using the grease gun supplied. Compared to the Vinions, there is now a part that allows the tool to be greased very quickly. Greasing between blades is only necessary when changing blades. As you can see from the product tutorial, a 3-station charger is included in the product case, with 2 batteries included, but you can buy additional ones.

[@BIeak1]

@@PellencGroup Thank you for the information! I'll consider the C3X since the Vinion is in heavy use since it got first released, it did a good job for several years now. The replacement charger would cost me 140 Euro, the blade is due for a change, and I don't know how much longer the second motor will last... so the time for switching has come.

[@PellencGroup]

We look forward to hearing what you think of our new C3X pruning shears!