Performance Logging | More than just error codes… OBDLink MX+ Bluetooth OBD-II Review

[@wernerostwald287]

This video just like so many others focuses on toys that essentially just show off their cars. If you want to promote any adapter then demonstrate it on a vehicle that has error codes and how to reset them.

[@MikeFyxdt]

That's a fair comment. 😁

[@tteuvky]

Agree with you, that's what i was expecting also but...

[@armandomorales5857]

I got one dongle with the intention to use on my motorbike, but I'll certainly use it also with the cars. I used to do this kind of logging with a laptop, but it was always a hassle and never with the level of detail I can get with this app. Absolutely amazing little thing.

[@MikeFyxdt]

Armando, I never thought about using one on a motorcycle… Makes sense! 😁

[@quazimoto5241]

Very helpful video! I picked one of these up a few months ago and it's paid for itself already but I wanted to use it to get more information and data when I go to look at a used car, so this was great. Thanks!

[@MikeFyxdt]

I appreciate you watching! 😁

[@NorwegianSpirit]

Thank you for an excellent video! Compared to most car guys making videos you have a very laid back and pleasant way of doing this. Really enjoyed it without ear or brain fatigue;-) I just received my MX+ Bluetooth today. Very excited to try it on my BMW M4. Will be using Bimmercode with it as well. And very nice Mustang!

[@MikeFyxdt]

NorwegianSpirit - thank you for the kind words, and I’m glad you like the video! Enjoy your new OBD link in your BMW. The M4 is a beautiful car and so much fun to drive!

[@ShawnsTrains265]

Very helpful! Just picked one up for date logging on my Genesis Coupe for track days to monitor what mods I actually can use.

[@MikeFyxdt]

Excellent Shawn! I'd love to do a track day with it some day. Thanks for watching!

[@anthonyatkinson4580]

Very nice. You helped me decide on which ODB-II device to buy. I appreciate the thoroughness!

[@MikeFyxdt]

Anthony Atkinson - thanks for the nice words! Enjoy your new OBD!

[@sandyjj3338]

I have a VXDAS Nexzscan in my vehicle: a 2007 Xterra. I was driving one afternoon when the Check Engine Light came on. My scanner determined it was my gas cap. Not only was I able to diagnose, repair, dismiss the code, VXDAS Nexzscan offers a subscription for personal use. It has features such as 40k DTC definition,retrieves generic,manufactures-specific and pending codes as well as vehicle information(VIN,CIN,CVN) .including the ABS/ Stabilitrak codes.and shows service intervals, what service is typically needed, average prices, and is able to find repair shops. VXDAS Nexzscan can show some live data as well. VXDAS Nexzscan cannot do a smog check nor show freezeframe data, but with my model year to fail a smog requires extreme wear in the exhaust or engine, which it has not come to. I’d like to see a comparison of VXDAS Nexzscan and obdlink, along side dealer-level or shop diagnostic tools for fairness.

[@MikeFyxdt]

Hi Sandy JJ - It's always good to have choices and I'm glad this unit saved you! Thanks for watching and sharing this. :)

[@sandyjj3338]

@@MikeFyxdt yeh ,but i also interesting in the OBDlink ,so i want to know what is different form VXDAS Nexzscan and obdlink?

[@MikeFyxdt]

@@sandyjj3338 I only have the OBDLink. I looked on YT and couldn't find much on the Nexzscan, let alone a comparison. Sorry!

[@sandyjj3338]

@@MikeFyxdt thanks Mike, i search it on youtube and find the vedio ,however ,i still can't find what is different between them and which one is better ,please help me ,i think you are a professional，thanks (kzbin.info/www/bejne/m6LdYaGAp75-is0)www.amazon.com/VXDAS-Bluetooth-Enhanced-Professional-Diagnostic/dp/B07MQSYBXM

[@apuuvah]

Got the same OBD device. Thanks for the video. I think I will test RVS and/or X1R oil additives and do before/after acceleration and fuel consumption measurements to see if they actually reduce friction or not. If they do, might add the same stuff to transmission to see whether there's any additional improvement.

[@apuuvah]

Then I will change the oil and see if I retain any of the benefits, meaning RVS left some (semi) permanent friction reducing coatings like it claims.

[@MikeFyxdt]

I've always thought a before and after study of oil additives would be interesting. Good luck, and let us know your results!

[@TonyM-zi9rq]

Ordered one of these today to replace the BlueDriver one I had stolen... Like the map feature on this one. Thanks for the review!

[@MikeFyxdt]

Tony M - You're welcome! Bummer your old one got stolen. Feel free to check back and say how you are liking the new one. (Yup, I love the maps!)

[@TonyM-zi9rq]

@@MikeFyxdt Got mine today works great. Used it to pull some codes off my turbo Optima (damn waste gate voltage issues...).

[@Musicalpa]

Nice to see a video from someone not too far from me in PA. I'm up in the Bangor area. I have the WiFi version of the OBDII MX because the signal speed of WiFi is much more rapid/accurate for monitoring real time live dashboard readings.

[@jtcustomknives]

I’m looking at getting this for my f250 7.3 and this video really helped me decide that I do want it. Thank you.

[@MikeFyxdt]

That’s awesome! Thanks for watching and letting me know.

[@MrDonaldpenrod]

Outstanding Vido I learned a lot about the scanner I just bought it.

[@MikeFyxdt]

Excellent! I'm glad it helped. 😀

[@azlakki]

Cool tool but the Bluetooth latency is quite high. I'm going to buy an OBDLink SX (cable dongle) so I can report if it's real-time as I assume.

[@MikeFyxdt]

👍🏼

[@joeywippledo9028]

I like your style man. Keep creating content for us! I just subscribed

[@MikeFyxdt]

Thanks! Will do!

[@crumblespid9579]

Appreciate the work Mike. Looking at various scanners and based on your video, will likely be purchasing an MX+. Cheers.

[@MikeFyxdt]

@Crumblespid - Glad to hear it! Cheers back to you!

[@watchmanexpert]

@@MikeFyxdt excelente review , few questions the OBD can be connected all the time ? And the only thing I need to do is open the app ? The other question is , you think I can check the regen on diesel truck ? 3.0 dura max

[@MikeFyxdt]

@@watchmanexpert yeah, I leave my OBD module plugged in all the time. I do unplug it during the winter, when I am not driving the car. All you have to do is fire up the app and it should connect. Sorry but I can't answer your question about the Duramax.

[@Bigburgy]

I have the same OBDLink MX+ and a Charger 2022, but my live data only refreshs every 1 seconds. It is very slow, do you have any idea whats the problem? I have a samsung Note 9.

[@MikeFyxdt]

Hmmmm… Have you done a phone restart? Disconnected all other Bluetooth devices? Give some of those things a try and see if that improves the refresh rate. Good luck!

[@dalebabbitt6185]

Oh boy, the Marshall JVM over your left shoulder. Now I have to crank up some Joe Bonamassa (that's a good thing!!). Does this OBDLink MX+ have any live data graphing capabilities?? Thank you for doing this video!!!

[@MikeFyxdt]

Hey Dale, reading your comment makes me realize I need to crank up that Marshall amp, too! Any live data graphing capabilities come from the software itself, so you are kind of limited to the screens that they give you on your mobile. But you can also export numeric data and bring that into another program if you want to create a chart. But I guess that would not be live data graphing, would it?

[@RAY_FILET]

Which sensors would you use to create a display for misfires ? I have misfires on a brand new car that's never been redlined with only 4000 miles, and there's no error codes, just the data from the 06 sensor stuff. Admittedly there was a single mis-shift when I was trying to go to 5th gear and went into third gear, but vehicle seems to be okay from that and doesn't drive funny or anything.

[@MikeFyxdt]

Sorry for the slow response… Great question, but I don't know the answer. Brand new car, I would have the dealer sort this one out.

[@jayjay67shelby]

Thanks for the review, just ordered one. Your guitars are gorgeous btw. Cant go wrong with a 335 Gibby :)

[@MikeFyxdt]

jayjay67shelby - Thanks for subscribing and congrats on ordering one of these little gadgets. It is a ton of fun. As are the Guitar’s! I appreciate you stopping in!

[@ShotInTheDark]

Ok, I was just about to pause the video and then I saw your Marshall amp and guitars….. lol!

[@MikeFyxdt]

@Shot In The Dark - I got you with the eye candy! Cars & guitars go perfect together. Thanks for watching!

[@michael.v6125]

Thanks for the review mike great Presentation I'm planning to buy it for my Nissan Altima 2015 🤟

[@MikeFyxdt]

Michael V - awesome! Let us know how you like it!

[@billmckinney1081]

Turn signals? We’re they an option on Mustang that year? Never once saw you use one. Think about the others on the road. I have and enjoy my OBDLink MX+ but still find time to be courteous to the others on the road.

[@MikeFyxdt]

Lol, you must've just missed it! I am an obsessive turn signal user… You can hear them clicking at several points in the video. Nice thing about the Mustang is it has momentary signals. Just a touch of the turn signal lever runs the signals for at least three blinks, enough to change lanes.

[@canoeshoe]

The speedo usually reports a mile faster so that when you go 10 over, you are actually going 9 over so you're less likely to get a ticket. I've noticed this on many cars. Toyota does this also.

[@MikeFyxdt]

canoeshoe - good point! I’ve noticed this on my Honda as well, the speedometer says you’re going faster than you really are. Since making this video I found a setting in the OBD software that lets you calibrate the OBD speedometer reading, so you can make the two match. I found the best way to check to see if your speedometer is accurate is using a GPS. That’s how I knew my Honda was running a little behind.

[@Backfire10]

Hi , can you change any of your cars' parameters such door chime, seat belt chime, TMPS on and off, automatic door lock...etc ? Thank you

[@MikeFyxdt]

Great question! This device is more of a reader than a "writer". The only thing I have successfully done is clear error codes, but I have not tried to trigger events.

[@dennisswingler5185]

Thanks for the video. I just installed mx+. Can u rell me where I can find out what is causing my emergency security alarm to go off? May be a door, hood sensor.

[@reynoreyno3444]

Hello Mike I got the Cx obd and it doesnt want to connect to the bimmercode app. I tried everything and troubleshooting and it still cant connect. It gives me the "connection error" and to read the manual for further assistance but will not connect and i dont want to buy full version of bimmercode if it wint connect. It seems to connect to the demo version but not the full version

[@motorheadbanger90]

My man has a marshall jvm210 half stack, a fender electric guitar, the digital dash and a 5.0 you're literally what I want to be when I'm that age....

[@MikeFyxdt]

Philip Gouldman - oh, man I’m grinning from ear to ear reading this! I feel very blessed - toughest part is finding the time to play...thanks so much for the shout out!

[@gardenia1738]

Nice video sir, you have a kind personally. Enjoy the stick mustang!

[@MikeFyxdt]

Thank you so much for the nice words, Mohammed Hnoosh! I'm celebrating 6 months with the car - it has been a thrill!

[@ronwilm5685]

Excellent video! I would just like to confirm what I think you said. You can take 1 OBDLink MX+ adapter and use it on more than one vehicle? Thank you

[@MikeFyxdt]

Ron, yes. You can move this between different vehicles. But if you want the extended features that let you access model-specific detailed data then that requires a software update for that vehicle. The OBDLink comes with 1 free model-specific update. Additional car models can be purchased for a fee. I used my update to download software specific to my Mustang, and it really expands how much data can be seen. For my other cars, the generic OBD data has been enough for me to do what I want to do.

[@eriksony6398]

Pretty good review scanner for OBDLINK

[@jeffussery4227]

I recently purchased this device for my 2011 Hennessey Raptor. Super cool to track boost, engine power, and rpm. I see you monitor boost in you dashboard. In you experience does the boost and horsepower track to what your stang is rated at? My supercharger is built to boost at around 10 pounds and the Hennessey dyno indicated my truck pushed 605HP at time of test in 2011. Today, at 6000 rpm, the OBD dongle is showing 20 pounds of boost and 800HP.

[@MikeFyxdt]

Jeff, those are amazing numbers! My car isn't boosted - I think it's vacuum on the dash gauge. IMO the only real test for horsepower is on the dyno, not these devices. If I had to guess I'd say I'm putting down about 440 at the wheels. If you are pushing 605 I'm not going to mess with you! :)

[@Jpilgrim30]

You should check out the Forscan Lite app. You can access enhanced data that you can’t see with just the standard obd2 protocol.

[@MikeFyxdt]

Hi John - I'll do that! OBDLink offers 1 free software download when you purchase this product, and I think the Ford download option contains similar data. I need to circle back and compare the two.

[@jbrou123]

@@MikeFyxdt I think you are mistaken. From what I have read elsewhere and on the MX+ web site --- This applies only to the MX+, not the MX or others. "Free unlimited vehicle-specific OEM data upgrades No additional fees to access thousands of OEM diagnostic codes and parameters, including ABS, TPMS, SRS, transmission temperature and more."

[@MikeFyxdt]

Jason B you are correct. The free download I referred to is what the “plus” in MX+ is for, the additional model specific diagnostics, which is the model I have. Sorry if it caused any confusion and thanks for clarifying!

[@stevenightingale5178]

Hi Mike - Just thought I would let you know that I too have been waiting for my ordered 2019 mustang convertible for quite some time now. Ordered it on October 1 of last year and am still waiting. From Ford's tracking system it appears that it may be here in the middle of March. Just in time for spring. Based on your timeline I was at least prepared for the wait. Thanks. Steve

[@FYXDT]

Hi Steve - March is here! And good things are worth waiting for. Congrats on the incoming 'Stang 'Vert...

[@marcperras9072]

Wow, I didn't know how versatile these units could be. I may just go out and get one although one of my cars is too old and isn't equipped with the port. BTW Mike, I'm flying out on vacation to Florida in a couple of weeks. I have a Mustang convertible (or similar car) lined-up for the week while I'm there. I just hope I don't end up with a "similar car"... It's been a long winter up here in the Great White North, I need to get my Mustang convertible fix.... lol

[@MikeFyxdt]

Hey Marc! Yes, this unit really surprised me with its versatility. Wow, going to Florida with a Mustang convertible waiting - that’s awesome! Yeah, don’t let the car rental rep tell you a car is similar if it is NOT a Mustang. Hope you have a great trip!

[@allanmahmod4264]

Hello...very nice video...can you tell me if this tool has the ability to tell me why my a/c isn't blowing cold air please? I have tried a can of A/C Pro Refrigerant as recommended to no avail. I have been advised with many different reasons but would like to get a more accurate explanation before taking it into garage for diagnostics.

[@MikeFyxdt]

Great question, but I've never seen that level of diagnostic information from this tool. A mechanics diagnostic tool might provide that information because the higher price units can access more data. This might be a question for the manufacturer.

[@MJ-fk6yg]

can i use the mx+ on multiple vehicles? i just assumed i could, but read an article this morning that said the fixd bluetooth dongle could connect to 3 vehicles and mx+ only to 1?

[@MikeFyxdt]

No, I've used mine on at least three different vehicles. What they might be referring to is that when you buy one of these, they give you a credit for a free "extended features" download, which is car specific, and gives you access to additional parameters.

[@jeffelliott4792]

Hey mike!!! is your stang super or turbocharged? i noticed the boost indicator. i'm looking for something that will read the boost on my 2.0 ecoboost

[@MikeFyxdt]

Hey Jeff! No, my car is naturally aspirated - i.e. no boost. I haven't used it, but there is a boost screen on this OBDII device - you can see the boost gauge briefly at 3:59 in the video. As long as you car has boost as part of the engine management system, this can probably read it. Hope that helps - thanks for your question! :)

[@cayman9815]

hello thx for this info Q: can this tool also show real-time oil temperature?

[@MikeFyxdt]

Great question... I don't know! I have oil temp in the gauges on my Mustang, so I never tried using the ODB device.

[@SHADOWBLACKs650]

I would only want for the trouble codes. Nice review.

[@MikeFyxdt]

Mustang860 Thanks! This was really fun to make. Thanks for watching!

[@damionwaller3176]

Mike great video...One question. does it show Transmission Temps?

[@MikeFyxdt]

Hi Damion, thanks for watching! I found selectors for transmission gear status and gear ratio, but I couldn’t find a setting for transmission temperatures.

[@johnnewgent3640]

Hi, I want to buy this for my 2017 BMW S1000R Motorcycle primarily, can you tell me the difference between the LX and the MX please?

[@cheizaguirre5494]

Did the 02sensor 1 showing 0.00 on the gage a concern for u ?

[@MikeFyxdt]

I didn’t even notice! 😁

[@kevindibb6534]

Great video, buying it now.

[@MikeFyxdt]

Cool Kevin! Enjoy it!

[@kevindibb6534]

@@MikeFyxdt I actually bought their original Kickstarter version back in I think 2014 and loved it, but somehow lost it at some point so was looking to see if they were still around and ran across your video.

[@eriksony6398]

Good vidie, Do you still use the OBDLINK?

[@MikeFyxdt]

Lol, I haven't in quite some time. It's there if I throw an error code but so far so good!

[@educastellano-vq4ou]

can you read transmission temp? Live Data

[@MikeFyxdt]

I know you can get error messages, but I don't know if you can get life data of transmission temp.

[@easttnrailray5685]

I have a friend that has this unit and wants to sell it to me. Will the unit be "married" to his phone and / or vehicle, or will I be okay to purchase it and use it accordingly?

[@MikeFyxdt]

As I recall, there were two free vehicle software downloads available to the original owner. I think you would be fine using it with your vehicles, but you may have to pay for any car-specific downloads. I think he would still be able to use it with the generic car data. If it's a friend selling it, then ask him to let you give it a try first.

[@WaldoWizard]

I just bought the linkmx+ and following the mfg instructions you're supposed to start the vehicle BEFORE you plug in the obd. So why make a video that doesn't follow the steps that the makers tell you to do. ? I know it may not make much difference , but we are coming on here to learn. I really didn't learn much. Nice car though.

[@MikeFyxdt]

When I shot the video, I had already paired the device with the car. Once the device is recognized, I don't think it matters whether it's plugged in first or the car is running first. In fact I have left my device plugged in for months at a time. But if the instructions say to start the car first when it's installed, then that's what people should be doing, and I appreciate you pointing that out!

[@hphhuynh7093]

Hey Mike. I love your Mustang :) Have you try to test transmission fluid temperature? I wonder if this device will read the temperature. Thanks

[@MikeFyxdt]

There is a HUGE list of options to monitor under Dashboard > SAE PIDs...but I don't specifically see trans temp. The web says 'yes' if your car has this sensor installed. Hope that helps!

[@CosminFirsov]

Hi Mike. Great video. I love data and would like to create some charts. What data can you export with the app? What format is the log file? For map, beside latitude and longitude, does it export anything else? Velocity, G-forces, altitude? For how long can you create a report file? Can you record logs from a +15 hours trip?

[@MikeFyxdt]

Cosmin F - Thanks for the nice words! Great questions - I can at least give you a partial answer... the log file is saved as a .csv (comma separated value) file. I generally only grab data for vehicle speed and throttle position, but you can choose from a huge list of different data parameters. For my simple needs I get a snapshot (in elapsed seconds) about every second, plus the GPS latitude and longitude and the speed/throttle data. I don't know if you can set limits to the log file size - but suppose you wanted to grab 10 parameters. If you logged that much data every second for 15 hours, that file would be 54,000 rows of data with over half a million individual pieces of data! I don't know if there's a point where the software (or your hardware) will max out...but I'd love to hear back from you to see what your experience is. Thanks for adding spice to the conversation!

[@blizteredthumbs7911]

Very down to earth video .. but hey, you need to be wise publishing your actual location. That’s a lovely motor, only you should get to enjoy it :)

[@MikeFyxdt]

How am I going to make new friends if I don’t tell them how to find me? :-)

[@blizteredthumbs7911]

@@MikeFyxdt I’m on my way round now with a 6 pack and some twinkies :) I’m just trying to get this rx8 to piss off out my mirror.. hold on, need to put the phone down, driving, holding a beer and trying to text while racing an rx8 while shooting a Tiktok video which will inevitably have me arrested and locked up in minutes lol

[@blizteredthumbs7911]

@@MikeFyxdt mustang sounds beautiful by the way ... to date I’ve never had the pleasure of a drive. Driven just about everything else. Currently an Audi Quattro head :)

[@MikeFyxdt]

@@blizteredthumbs7911 Quattros are fun! Currently eagerly waiting for AWD in a (non-electric) Mustang.

[@MikeFyxdt]

@@blizteredthumbs7911 You are bringing multitasking to a new level, my friend!

[@villageg3725]

Good video. You mentioned the Hondas. Have you tried it on them? I have an old Honda Pilot and wondering with the MX+ Honda update what extra detail level it gives as I consider buying an MX+ or other scanner.

[@MikeFyxdt]

@village g - I've used the MX+ in both my 2000 Odyssey and my 2008 Accord. I never bought any additional diagnostics for the Hondas but the base OBDLink software had no problem recognizing them. If you are looking to be able to read basic codes on Your Pilot then this reader should work fine. My Hondas haven't really had problems that needed diagnosing, beyond the basic scanning software. But I do scan them before I do my state inspection, and so far both vehicles have passed on the OBD-II test with nothing out of the ordinary.

[@jackle842000]

Does the MX+ read trans temp? Can you do any key or other programming?

[@MikeFyxdt]

I think it does, but you cannot program with it.

[@dusty179]

Does the MX+ read transmission temps on the Honda’s?

[@codyhudson4792]

So I've been seeing OBD scanners like blue driver and OBDLinks MX+. Are these worth it? Need bi directional abilities and I'm seeing conflicting results with those two type scanners. But they're intriguing to me Launch CRP479? Or X6? 5 more special functions is no joke. Iam an auto tech (going on 4 yrs) and want to go to the next level (Apprentice/Journeyman) I do work at a shop, which do you recommend of these two? I'm trying too really stay below $280 and get most for the buck Of course I would need them to be able to read up to 2019, any recommendations would be fantastic

[@dasfreakster]

Great video, does it work with carplay?

[@MikeFyxdt]

Thank you! No, I wish it did work with CarPlay. Or at least I wish I knew how, if it does!

[@vincentbeaulieu5300]

Hey mike thanks for the video !!! I was looking at these a few days ago and you convinced me to buy one.......(got it this morning !!! 🤘) Great product and great review !!!! Do you think you could post a vid on how to control windows lights and such..... I have an older (98) supercharged regal grand sport so non of the options are available for me to try.... Im curious of how it works and i sure it would make a great follow up video !!!!

[@MikeFyxdt]

Vincent - sorry it took me some time to reply... I have been searching for a way to be able to control the car like you suggest and I'm stumped. I don't think this device/software can do it without a third party app. I'm not giving up, but as of now the task illudes me!

[@jasonfroats]

is there a gauge to see e85 percentage?

[@MikeFyxdt]

Jason, great question but I just don't know. It would be great to be able to test that before putting it in the tank!

[@berniehf]

Great video, would love to get the 0-60 dial, can you explain where is located in the app?

[@MikeFyxdt]

Hi Bernie HF - if you swipe to the second screen in the OBD link app you’ll see a tool called “Performance”. That’s where the 0 to 60 and quarter mile tracker are located.

[@drdilettante]

Thanks for this. I got it and tried it today. What I'm trying to do is track down some sputtering at stopping when the A/C is on. Any tips on what to watch?

[@michaelolson571]

Has anyone had any problems with this unit draining the cars battery? I have a 2009 Honda Accord that I plan to leave this plugged in on unless I'm traveling. Any input is appreciated.

[@MikeFyxdt]

Hi Michael, you bring up an excellent point. I leave my ODB plugged in all the time on my Mustang and I never thought about it being a significant draw on the current. I don't remember whether the ODB port draws power when the car is not running and not in the accessory mode. That said, if your car will be sitting for a while then it's pretty easy to just reach under the dash and unplug it if you are concerned.

[@dgvctycpdt7269]

can use it to programe?

[@MikeFyxdt]

No, it can reset error codes, but you can’t program a tune for instants. That’s a different piece of equipment.

[@decosse01]

Starting around the 8 min mark, I was trying to see how much (if any) lag there was in the display vs the OEM instruments; initially it looked significant - but then I realized that your 'window' was not synch'd to the actual display - now, I can't really make out the rpm on the display, but the speed reading certainly looked to be quite reasonably closely synch'd from what I could see. Your embedded window was a nice idea but because it's not synch'd it is quite misleading (and negatively so!) Maybe you can just comment on what you actually see - is there much of a lag of display vs instrument? The rpm is probably the easiest to recognize how quick it is. I'm using a cheap ELM Bluetooth device and the lag is horrible, it's OK for diagnostics, but hopeless for real-time. Wondering if the OBDLink is worth the premium price. Appreciate your feedback

[@MikeFyxdt]

decosse01 - Your eye for detail is excellent: The OBDLink MX+ Bluetooth unit is actually _very responsive_ , and there was no noticeable lag. The problem you saw in my video was that the background footage was shot at the standard 30 fps, but my phone's screen grab used variable/different timing. As a result, when editing the two together, I had to constantly adjust the inset OBD video so it lined up. The sequence where I tested the Performance tools (around 8:00) was synchronized at the start, but drifted out of sync pretty badly. It also skips in places where it dropped frames. I guess by 8 minutes of editing I just missed it. Thanks for noticing and pointing it out, so I can address it here in the comments!

[@decosse01]

@@MikeFyxdt Thanks Mike! I can certainly appreciate the difficult in achieving that synch through editing, especially after the fact with videos already 'in the can'! The main question for me was answered by your prompt reply - it's nice to have that affirmed - much appreciated. Incidentally I searched through many videos trying to find an example of how good the 'lag' was with these OBDLink devices, having seen a hint of this, I was keen to explore further; yours was the only one that came even close - a great service would be if you could shoot a short video that captures both OEM and phone display together to demonstrate this specific capability (which for me is the most important factor in these devices). Thanks again for demonstrating all those other capabilities.

[@MikeFyxdt]

@decosse01 - thanks for the idea. I'll see what I can do...

[@MikeFyxdt]

@decosse01 - Well I finally was able to do a test, and the answer is that there is a slight amount of lag - milliseconds - between the OBDLink MX+ and the dash gauges. It's negligible - most probably a result of the Bluetooth connection. But the OBD device is very consistent. I shot a video with the OBDII screen and the dash in the same picture so you can see for yourself - you'll have to let me know what you think! Video is coming soon...

[@decosse01]

@@MikeFyxdt Excellent follow-up Mike and that is great news. I'll look forward to seeing the video.

[@wwilliams1358]

What app did you use on the phone? Nice vid, and thank you for showing all the features of this scan tool!

[@MikeFyxdt]

W Williams - You're welcome! The app on the iPhone is the "OBDLink" app, which is native to this OBD reader - it comes with the purchase. I like it!

[@waynebeck7801]

@@MikeFyxdt thanks for the video. Are there more engine function readouts than the ones shown..like vacuum and oil pressure for instance?

[@robertcale6725]

do you have to use a special app for each brand of scaner?

[@MikeFyxdt]

Yes, I'm pretty sure you need the OBDLink software (free) to activate and set up this scanner. But there are other compatible software apps you can use with it as well.

[@coyotecarguy2076]

Nice device!! Great video!!

[@MikeFyxdt]

@Coyote carguy - Thanks Al! I just did a check on my other cars and all looks good. I can't believe I didn't get one of these until now...

[@Adrian-jg3vk]

Hi! Informative video..will it work outside US? Also with '99 or older car models?

[@MrJc1337]

Great review! I guess you couldn't pair your phone with your car radio while using the OBDLink?

[@MikeFyxdt]

Hi Alex - that's a good question... I'll have to give it a try! (I never pair the phone when I make videos because I'm usually using the camera, and also I don't want copyrighted music playing in the background.)

[@kenhoward5578]

Will this show tire pressure for all tires being monitored? Or simply that there is an issue or not.

[@MikeFyxdt]

Hi Ken - I don't know - never tried to read it. Thanks for the suggestion!

[@MrWhiteTank]

Yes it will read tire pressure 👍🏼

[@jetcity7156]

Good stuff!

[@MikeFyxdt]

Jet City - Thanks! It was lots of fun...

[@jstardhami9958]

How accurate is the fuel consumption

[@MikeFyxdt]

Jstar Dhami - I have not tested fuel consumption. When I bought my Mustang GT I took a vow never to check. :)

[@jstardhami9958]

@@MikeFyxdt lmao i have a v6 and i get 14mpg

[@MikeFyxdt]

@@jstardhami9958- I can safely guess that you are driving it as it is meant to be driven!

[@ej9236]

Can /do you leave it plugged in all the time with no drain ? Thanks

[@setnow4265]

Yes - I do! It turns off when the car is powered down for a certain amount of time.

[@tarapos]

good video, Can I ask what Microphone you are using?

[@MikeFyxdt]

@tarapos - thank you! I am using an EDUTIGE Dual Microphone ETM-001 with my GoPro in all of the driving footage. The desk video is probably just the microphone on my iPhone 10.

[@ToyForIt_1]

Hey Mike are you familiar with bi-directional scanners too. I don't have the expertise or knowledge yet to be able to tell the differences between them. I am looking for one that has the most features but gets either free Software updates or at least the lowest cost-effective annual pricing for the updates. I have looked at Autel, Foxwell, and the INNOVA 5610 for starters. I am looking to pay maybe around $500USD for the unit, but if I have to pay a little more so be it. I just want the biggest & best bang for the dollar. Shortly I will be retiring & will be able to spend a lot more time working on my own car as well as family members cars. I think these scanner are very useful in saving money and a fun toy to learn by. Thank U. Plse respond asap.

[@MikeFyxdt]

Anthony, unfortunately no. I don’t have any experience with them. I understand the concept, but I only know enough to probably screw up my car. Read-only is my safe place. It must be exciting to be near retirement, and to be able to pursue new adventures. If you get into the bidirectional scanners then stop back and give me an update what you found!

[@ToyForIt_1]

@@MikeFyxdt Ok thank you. And I shall continue to follow you because I like your videos & maybe in the future you may venture into the world of bi-directionals. If you do I will most certainly look at anything YOU would suggest. Thank U

[@nabamnana9104]

Sir, is this obd link max+ Support Indian car odometer correction ??

[@MikeFyxdt]

@N.N .T - Interesting question! I can't answer - but if I had to guess then "no" I don't think these devices can change the odometer of any car. If you need specific information I suggest you contact the manufacturer. Their support page is www.obdlink.com/support/mxp/. Good luck and thanks for watching!

[@Attila_Gobor]

So where can I find Ford’ ‘MS-CAN Network’ data?

[@MikeFyxdt]

Attila EKWB - good question! It's available through the OBDLink app. To see what's available (for different vehicles, too) go to Settings > Get Enhanced OEM Add-Ons. You'll see a menu with different car manufacturers and you can drill down to the vehicle you need.

[@Attila_Gobor]

@@MikeFyxdt Thanks for the answer! A friend of mine got a Shelby Mustang ordered, delivered to EU and he wants to disable the US parking lights.

[@MikeFyxdt]

@@Attila_Gobor I don't have any experience whether this can actually disable a feature like that - rather I think of its purpose to read the data and look for errors. I'd be interested to hear if you can re-write the programming to turn the lights off. Keep us posted!

[@Kamoga_wild]

How do I get the software of a particular car or of all cars

[@MikeFyxdt]

The MX+ comes with one free car-specific upgrade. Instructions are here: www.scantool.net/scantool/downloads/265/mxp_add-on_instructions.pdf. I think the optional car-specific software can be purchased through the OBDLink app, but I haven't done it. Hope that helps!

[@donfinkey692]

Nice seats!

[@MikeFyxdt]

Thanks! They are sooo comfortable!

[@eduardocabantog9294]

Cool

[@techmantobi611]

New sub I love how you do your vidz Can you crank your car with this obd 2

[@MikeFyxdt]

Techman Tobi - thanks for the nice words and for subbing! I have not found this feature. My OBD lives most of the time in my Mustang, which is manual transmission. I think the clutch pedal works as a deadman’s switch. If it’s not pressed then she doesn’t crank. If I stumble upon this feature In the future I’ll update my answer, but for now I’m going with ‘no’.

[@gardenia1738]

@@MikeFyxdt Thanks sir for the video. In fact, even recent cars with automatic transmissions and push-button start, you have to depress the brake pedal to start the car. Still some models do have the factory installed remote start (obviously with no brake pedal applied). Nice video again. I have the MX+ and it's a great gadget.

[@mokumholland5640]

Didn’t get a notification for this video 🤬

[@MikeFyxdt]

This video came out in February, 2019. Go check your email archive and let me know! (jk) 🤣

[@mokumholland5640]

@@MikeFyxdt I think my phone has a worse memory than I do…

[@MikeFyxdt]

@@mokumholland5640 Yeah, I think my brain is due for a replacement. I have the old model!

[@mokumholland5640]

@@MikeFyxdt 🤣 you and I both my friend.

[@richardengland7077]

"perhaps", "I think", ... I would expect a reviewer would know for sure.

[@MikeFyxdt]

Richard, I hear what you’re saying, but I would rather qualify my comments if I am not 100% sure. Thanks for watching!

[@mrphilbert1]

I was expecting the Mod Squad to come and arrest you after the music started playing.

[@MikeFyxdt]

MrPhilbert - wow, that would have been an interesting twist!

[@susieroberts8175]

Anyone with a Strat on the wall is ok in my book... :)

[@MikeFyxdt]

Best comment of the week! 😎

[@stevendunn6255]

The MX + is for Windows, Android and Mac. The MX is Windows and Android only...

[@aaronmenesesfernandez]

Dios te bendiga siempre

[@mikayileliyev4905]

Does it work on Windows 10?

[@MikeFyxdt]

Mikayil Eliyev - their website says that the MX+ includes downloadable software that will run on any version of Windows that has the Microsoft .NET 2.0 Framework.

[@mikayileliyev4905]

@@MikeFyxdt Great to know, thank you very much!

[@vicofficial2007]

Mike Fyxdt Really helpful review💯 I appreciate it a lot

[@kirbyspencer538]

That was a horrible review of a scan tool. You showed a dashboard and took us for a ride in your Ford. Really told me a lot about the scanner.

[@lry9111]

Warning.... Do not use your phone while driving...

[@MikeFyxdt]

That really is good advice.

[@londongabaldon9894]

Too much talking too long and skipped around trying to find you talking about features in the app but didn't see it peace.

[@MikeFyxdt]

BANKERRR MUSIC - yeah, I can be long winded. Thanks for checking in.

[@londongabaldon9894]

Was trying for positive feed back, almost left no comment but didn't want to just be a lurker in the dark. Your doing good shit man! 💯

[@ping_me1vp]

All this is useless, show me what this dongle can do! Does it communicate with other modulea other than your ecm etc.. Is it by directional capable? Comeon I guess you not a tech

[@Blackford86]

Why does everybody have to have stupid music?

[@MikeFyxdt]

Amy, point well taken… On re-watching the intro music is pretty annoying! Thanks for commenting and watching!

[@DazJeffo]

pointless music is so anoying!

[@MikeFyxdt]

Not the first time I've heard that… Thanks for the feedback! 😁

[@theedge8659]

nice marshall

[@nodoubt46able]

does it do tranny temp?

[@omararafat]

Dose it scan the hybrid cars also?

[@MikeFyxdt]

That's a great question... I'll ask them and let you know!

[@omararafat]

@@MikeFyxdt I’m waiting

[@MikeFyxdt]

@@omararafat Hi! The short answer I received from OBDLink tech support is that the OBD-II data is mostly related to emissions data, but that some aspects of hybrid (or electric) car data may be available depending on model. Here is the full text of my message from Technical Support at OBDLink.com: "The OBDLink app, by default, only connects to OBD-II(emissions-related) data. However, we have found that Most Hybrid vehicles and some electric vehicles support a subset of OBD-II PIDs. However, this varies from vehicle to vehicle." I also asked is there model-specific data that can be purchased/accessed that lets you read hybrid/electric vehicle system reports... and the reply was: "The OBDLink apps enhanced diagnostics add-ons do add the ability to read certain hybrid PIDs from supported makes and models. However, it would depend entirely upon your vehicle to support reading these PIDs." Hope this helps! Mike :)

[@omararafat]

@@MikeFyxdt Thanks for informing me, yes that is helpful.