Performance road glide build on a budget [P1]

[@gn4rk4rt39]

“Riding through this world” had me rolling 😂

[@louis_costa]

The timing on this and the cam plate vid hits home. Thanks

[@kruesioriginals]

I’m psychic😎

[@n4zou]

I'm an old man so I wanted an old man bagger. I purchased a Honda VT600 VLX cruiser for it's low seat height and it's one of the few modern motorcycles old 70's era Windjammer fairing can be mounted on. I found a complete Windjammer touring kit with the Windjammer fairing, bag's, and trunk for $100. I fabricated brackets for all of it. It turned out better than I expected! If moving while it's raining I will stay dry. That was 12 years ago. After enjoying the bike those 12 years I was now 12 years older and was starting to almost drop the bike a little too often. Most would give up but not me. I added a Velorex 562 sidecar to it which solved the "too old for motorcycles" problem. I actually should have gotten into sidecars decades ago! All I can say is "So much fun"!

[@jf7393]

Seems like one of the rare outfits that actually tries to make a bike as sick as possible within somebody's budget. Its a hard life because there's less money in the game when you operate like that but my hats off to you for sure. That's pride of craftsmanship shit

[@kruesioriginals]

Hell yeah I still want to build rad sh$t so I work with what they got as best I can

[@dndzoned4134]

Wish I lived closer would love work done on my 08 softail ! Keep killing it brother

[@oscarornelas6619]

Kruesi Originals and guys alike are what make riding a Harley and living this lifestyle rad. Harley Davidson should throw these guys a bone and quit playin. 🇺🇸🇺🇸🤟🤟

[@PANTHER_PLAYA]

"Nothing says cool like some bedazzled shit on a harley Davidson" That one really got me dude.

[@charlesskelton4058]

Hell ya, make room cause I'm walking thru that door someday soon. I'm thinking February....

[@nbitt1319]

Sick! Best Harley channel on KZbin! Respect 👊🏼

[@kruesioriginals]

Thank you 🙏

[@jordancoleman2718]

Im putting together a 07 eg standard. Switching to a rg fairing, fuel moto 107 kit, woods 555 cams, custom 2 into 1, 14" mx bars, race tech springs fr., ohlins 13.5" rear, progressive sstabilizer, stereo, paint, powder coat, ect. Watching all the budget bagger and skinny tire bagger stuff.

[@kruesioriginals]

Sounds like a ripper, I would suggest much shorter bars for handling

[@jordancoleman2718]

@@kruesioriginals I'm sure you're right. I bought these 4yrs ago to replace my 14" yaffee apes. I'm 6'2" w long arms tho. Was running air ride in the rear, bag extensions....that look. Tore it down for a low buck "performance" type ride, and got locked up for two years. Made parole, and getting back on the build. I ride a sweet lil 94 fxdl in the mean time.

[@vtwinbuilder3129]

Haha, all those Law Tigers sticky notes.....we have a lot of them too.

[@Frankfoot986]

Idk how they’re gonna top that road king. That road king is my favorite bike I’ve seen from anyone.

[@kruesioriginals]

We’re not going to top the Road king this is a budget bill that was more like a $60,000 build

[@GiancarloFloyd]

I can’t wait to see this bike being built.

[@switchbackrider1139]

I was wondering when you would do a bagger. Rock on!!🤘🏻

[@justinlewis3898]

Came back to check on Bill, feel like I’m on the same wave length as him and know his ass forgot to clock in again 😂💀

[@Moto_Bandits]

Just said goodbye to my razzle dazzle pants after watching this

[@GilstrapGarage]

That’s going to be a dope ass suspension set up

[@johnnyu9692]

Hell yea brother, another series in the making. Sick pod too, boys!

[@dbanana1]

Only Ryan gets a brand new road glide and cuts into it with a grinder 🤙🏽 😂

[@snakeoil2182]

Salvaged title foo

[@robertrodriguez2412]

Can't wait to see the finished product!

[@lowcountryrob170]

Following along on IG too, this is going to be a great video.

[@twowheelterror2925]

Should be a sick build series fellas... Channel is rad and always getting better and better, I'll stay tuned and spread the news for ya'll!

[@kruesioriginals]

Hell yeah thank you

[@chuckbaker8413]

This is so very cool… I’m a tall guy and do not fit on standard HD cruisers… the seat height (27.7 or so) on the fat bBob is the tallest but with its wheel base I’m very “scrunched “ up and not comfortable… I’ve been thinking… I want a bad ass scooter built out of the road series platform without all the touring crap hanging off it… Ready to rip canyons…. I’m really interested in how this turns out… thank you..!!

[@dillon6847]

Looking forward to the series!

[@sportman8467]

Really like the show man I'm a dyna man myself 2002 with carb keep it up ✌

[@jordancoleman2718]

Super cool stuff.

[@kevinthompson3776]

Diggin your content! Just subbed. Would be cool if you did a parts price breakdown at the end. I know labor varies all over the place so I’m not expecting that. Looking to do a similar build and will definitely keep an eye on your build series. Keep shit real and I’ll keep watchin!

[@jimmywalker9672]

"riding through this world" all alone. had my dad rolling over in his grave

[@JakobKaizen]

Effin love this build series! An planning to do exactly the same with an M8 RG, either a RGST or RGS and have it shipped to Sweden where I live. Any tips or tricks on how to pick a good bike to buy from Copart? Would love to hear! Subbing🤘🏼🤘🏼

[@kruesioriginals]

Copart you just have to examine every picture thoroughly and read the write up. It’s really a gamble I don’t really mess with Copart too much really at all but you can find some good deals there.

[@JakobKaizen]

@@kruesioriginals Gotcha, thanks. So even tho it´s marked as "Run and Drive" meaning it´s been started, put in gear and rolled forward as well as the only damages you can visually see on the bike is cosmetic, that wouldn´t be anywhere near likely to be a engine, drivetrain and chassi wise safe bike to go for basically? My mechanic is helping me source the bike as he´s done this a few times before himself, but it might be a bigger gamble than I though then?

[@HAILProphecy__]

Django Unchained, Death Proof, Kill Bill Vol 1 were the only movies I liked from quentin tarantino

[@bobbyvegas666]

Excellent Geeza lol

[@smasheddragon]

Talk shit 🤣😂🤣 u didn't get goodntight from the start?!? 🤣😂🤣 have a 12' glide... can't wait to see this finished!

[@OakwoodCustoms]

Diggin the educationals homie🤙🏽

[@dandarnall6445]

Hell yea I enjoy watching the videos you keep it real as fuck man keep it up.

[@sallin828]

Motosicles everything going wrong with a passion

[@crackincans9593]

Such an under rated channel mate, keep up the quality content 👌👌👌 Heaps better than the trash I put on KZbin haha!

[@jordanbrackeen9186]

FUCK YES TO THE PODCAST!!!!

[@sutoritokingu]

look forward to the series, during editing maybe make sure the music volume is the same as rest of video!

[@tonyparson4392]

How much for the black forks, really on need the lowers. Thanks

[@MilklnTheFridge]

Looking forward to it! hello from lockdown jail melbourne hahahha

[@georgef1176]

Bro if you ever need fully experienced tech I would up and move to Arizona from New Hampshire in a second. Im 38 and could use a change of scenery. I have a 600hp all motor 1990 ls2 t56 s13 I will let you shred lol.

[@kruesioriginals]

Message my personal Instagram

[@luisenriquez6810]

When are you guys going to restock the K-Bar for the dynas or are they gone for good?

[@kruesioriginals]

We ordered material four months ago we just drove to LA and picked it up today. If you want one call the shop Tuesday through Friday and talk to Trent and get on the waiting list those people are getting them first

[@Sendheal]

Whats your opinion on race tech and gold valve now?

[@drainmonkeys385]

I wanna do it.. on a touring bike.. street glide or road glide but try and keep it around 700 pounds .. can it be done?

[@209RCBASHKING]

Will Dyna wheels fit my 83 Sporty?

[@bobbyvegas666]

Lovin it yeeeeeeew

[@Hightechredneck704]

Excited about this build……. One question, did you find the brake lines? 😂

[@kruesioriginals]

No I think we used him on something else😂. These forks are way too long I’m gonna build some new ones

[@artempeshkov7489]

Speaking of weight reduction how much it could be?

[@garywall8712]

Will you be doing a series on your own bagger?

[@Fatalisticperformanceinc]

Im askin the same question bro hahah

[@kruesioriginals]

Well I’m kind of having some problems with that. I made the deal with Buddy Stubs, then corporate stepped in and crushed it. So I’m trying to back door those assholes right now, as long as it still goes through yes we will be doing the whole series and I will be going pretty hard-core with that bike

[@garywall8712]

@@kruesioriginals Corporate HD is so shitty to deal with from what i've heard. You're already taking over the scene through the backdoor so why not a backdoor deal 😁😁😁

[@genegraves6963]

Rad

[@AsphaltAnarchy]

Build me one to drift/wheelie!

[@kruesioriginals]

We can do that

[@AsphaltAnarchy]

@@kruesioriginals perfect! I’ll be in touch soon. 🤝🏻

[@harryballsnack7297]

Good fuckin' video Bois!

[@larrys.3992]

Fukinaye!

[@riffraffchoppers]

11,000 is a pretty decent size budget for add ons

[@kruesioriginals]

Not When it comes to building a bike like this

[@riffraffchoppers]

@@kruesioriginals I guess I’m basing that off being a builder not the customer.

[@charlesskelton4058]

Just tell me what your missing at the barbeque, think one thing motherfuckers always forget. I'm your man. 😎👍

[@josephwinkler4863]

I think every vehicle and motorcycle should be offered without the electronic bullshit I want regular brakes and regular traction shit I don’t even like rev limiter’s

[@dancole909]

Rad...

[@timdavis8154]

Why low rider s forks instead of aftermarket parts.

[@kruesioriginals]

What aftermarket parts? What’s better than Lowrider S Legs.

[@dplorbl]

I’m blind in my right eye; really messes with your depth perception (shooting/riding/etc) Wear your eye protection when grinding