Perkins 4.236 Engine / REPAIR or REPLACE? [E15]

  Рет қаралды 10,223

Sailing Squalo

Sailing Squalo

Күн бұрын

Пікірлер: 31
@bozenagaecka1071
@bozenagaecka1071 2 жыл бұрын
I kolejny milowy krok zrobiony! Tak trzymajcie! Pozdrowienia dla załogi a także dla przyjaciół, którzy chętnie pomagają🤩
@AndyUK-Corrival
@AndyUK-Corrival 2 жыл бұрын
I think you made the right call on the engine. If you cannot have a new one then refurbishing the old one is better, IMO, than buying a secondhand one that you do not know. I had a similar dilemma with my Rival 32, I got the old Volvo completely rebuilt and it was like new when done. So far' it has run really well and I’m glad I did it that way. Perkins are well known around the world and spares available so you should have a great engine once your friend has rebuilt it. Andy UK
@sailingsqualo
@sailingsqualo 2 жыл бұрын
I couldn’t agree more. We have a saying (probably there is similar one in English) The devil you know is better than the devil you don’t.. not saying our Perkins is the devil haha it wasn’t that bad ;) it worked all the way from Gib to UK, started every time we needed it.
@AndyUK-Corrival
@AndyUK-Corrival 2 жыл бұрын
@@sailingsqualo Excactly the same in English. With regular maintenance it will serve you well for a long time I’m sure.
@vraymond108
@vraymond108 2 жыл бұрын
I joined because I have the same engine in our boat and am concerned it is also ready for “re-birth”. The accessories I have had all replaced over the years but the engine must have over 10,000 hours on it so maybe it is time. Looking forward to watching your progress.
@sailingsqualo
@sailingsqualo 2 жыл бұрын
Hi Victor, thank you for subscribing! Well, yes these engines can go for ever apparently. We don’t even know how many hours ours has done.. 🤷🏼‍♀️ What have you replaced over the years? And if you decide to refurbish it, do you wanna do it yourself? Best, Nat
@jeanclaudepiessevaux2573
@jeanclaudepiessevaux2573 2 жыл бұрын
Very good choice This engine is the best....be carefull with the headexchanger and oilcooler engine All mechanic is the same .My engine have 9.800 hours still working perfectly but for sure i prepair a second rebuilt myself. This engine can be fix in all the world....👌👌👌👌👌👍👍👍
@sailingsqualo
@sailingsqualo 2 жыл бұрын
Glad to hear yet another positive opinion on this engine. We don’t know the hours on ours, there was no record. I wish we had the knowledge to rebuild it ourselves. Mechanics is not particularly our strong suit 😅 Could you please elaborate on the heat exchanger and oil cooler?
@jeanclaudepiessevaux2573
@jeanclaudepiessevaux2573 2 жыл бұрын
@@sailingsqualo The engine oil cooler can sometimes puncture the copper tubes, causing the loss of engine oil during operation and seawater to seep into the crankcase at idle, with consequent damage. The engine cooling water exchanger regularly corrodes in the copper covers and aluminium plus salt water, causing leaks and difficulties to repair. Prepare assembly diagrams for these parts. original perkins drawing with the different parts. it will be easier for your mechanic used to land engine. The perkins 4236 does not have anodes but all electrical connections are isolated from the ground if this is not respected provide an anode in sea water connected to the engine by a cable. On a car the battery ground is connected to the engine, on the 4236 marine no ground is connected to the battery. The 4236 is very difficult to restart and to purge. I put a racor 500fg fh water separator filter and a lucas filter with a manual pump 9001742 A. The references are to show the model and the principle. The diesel pump on the engine is difficult to access and if the camshaft is not well positioned you will have difficulty pumping the oil. When boating it is important to be careful and often there is no time to quibble. One part that is fragile is the exhaust outlet elbow, I had it made in stainless steel by a craftsman in Thailand. parts4engine can give you good advice at a good price . i am from belgium This is translate. sorry Translated with www.DeepL.com/Translator (free version)
@marksmith296
@marksmith296 Жыл бұрын
I put a Bowman heat exchanger on my 4 236. It took some thought on the plumbing but I am very happy with it. Remember there is sea water sitting in your exhaust manifold to cool it. The bowman combines heat exchanger and manifold. Pretty cool up grade.
@jeanclaudepiessevaux2573
@jeanclaudepiessevaux2573 Жыл бұрын
@@marksmith296 what model of bowman did you mount on the 4236. bowman PE 390? Did you find a good price and a good supplier. thank you for the feedback
@sailingsqualo
@sailingsqualo Жыл бұрын
We have checked it out, quite expensive here in Uk, but you’ve got yourself a nice upgrade for sure. 👍
@bendaves77
@bendaves77 8 ай бұрын
I was brought up around diesels on farms and in semi trucks, with that being said after about 2002 i wouldn't want a new engine. I'd stick with rebuilding the old one..those old mechanical diesels are amazing and as long as you maintain them they last a very long time and when something goes wrong with them they're very easy to fix especially if they don't have any electronics. In farming or semi trucks the only time the engine is replaced with a new one is if the block is either broken from snapping the crank or its been rebuilt too many times before and sleeving it isn't a option.. by the time your qualified friend replaces everything you will have a new engine, it will just be the old block and reconditioned parts..
@sailingsqualo
@sailingsqualo 7 ай бұрын
Ziggy is good at most things.. but anything remotely related to mechanics and he is almost helpless. We can both do only the basics required from an average boater. If we change that engine (and most likely we will 🤫), we will go for Volvo Penta which is similar to the one we currently have, not the Yanmar common rail we see so much in new boats. We hear they can shut down if there is slight fault and you cannot troubleshoot it and fix at sea so easily. I wonder what is your opinion on going electric? It sounds great, but we personally don't believe we are there yet with the technology to be long time cruisers anywhere in the world and charge and power it solely with e-propulsion. I believe a generator is a must in such case. Perhaps we are wrong.. We would ideally like to go for hybrid solution.. but the cost of these are eye watering.
@bendaves77
@bendaves77 7 ай бұрын
@sailingsqualo going electric sounds good until you attempt it and realize that the technology is good but not good enough. Sailing vessel mig channel removed his diesel and went electric. You have enough power to get in and out of a marina but you still are going to have to run a generator. If I had to replace a diesel engine I'd definitely buy a diesel that has none of the newer technology simply because when something is wrong with it you'll be needing a licensed repairman and his laptop
@sailingsqualo
@sailingsqualo 7 ай бұрын
Yes, couldn’t agree more. 👍
@genasoloway2375
@genasoloway2375 2 жыл бұрын
Такий мотор по ліцензіі виробляли у Югославіі.Називався Раковіца,або в місті Раковіца.Можливо знайти запчастини в Сербіі
@sailingsqualo
@sailingsqualo 2 жыл бұрын
Thank you for the comment. One learns something new every day!
@patrykmatkovic5965
@patrykmatkovic5965 2 жыл бұрын
This day was awesome 😍
@nick.caffrey
@nick.caffrey 2 жыл бұрын
Somebody has a lovely voice in song...
@sailingsqualo
@sailingsqualo 2 жыл бұрын
With regret I cannot say it was me Nick.
@nick.caffrey
@nick.caffrey 2 жыл бұрын
@@sailingsqualo That's ok, Ziggy 😂
@sailingsqualo
@sailingsqualo 2 жыл бұрын
@@nick.caffrey 😂 It was me, Natalia who replied to your previous comment! LOL but I am guessing you knew that already 😁
@yoeliard
@yoeliard Жыл бұрын
Haven’t watched yet. Repair! Parts are around and cheap
@janstolk486
@janstolk486 2 жыл бұрын
it's not rocket science , .......do it yourself !
@sailingsqualo
@sailingsqualo 2 жыл бұрын
Thank you for the comment ;) however not everyone is comfortable refurbishing an engine. We have someone who is happy to do it for us, why not trust them and let them do it. And in the meantime we can take care of other things. There are still plenty of projects we need to tackle. Best, Nat
@harveymcfaull1307
@harveymcfaull1307 8 ай бұрын
Do you have a paypal
@sailingsqualo
@sailingsqualo 8 ай бұрын
We do NOW 🤭 I’ve just added link to our main page and in the description below 👇 in the video. 🙌
@harveymcfaull1307
@harveymcfaull1307 8 ай бұрын
Sent a little donation. Will do so again when I can afford it. On a pension but every little helps.
@sailingsqualo
@sailingsqualo 8 ай бұрын
@harveymcfaull1307 Thank you so much for your donation and for your kind message. 🥰We are incredibly grateful for your support and the fact that you enjoy our content. However, please don't feel obligated to donate, especially if it strains your budget. Your well-being is far more important to us, and knowing that our videos bring you joy is more than enough support. Best wishes, Natalia & Zygmunt
Unstepping the Masts & Hoisting the Engine [E16]
9:09
Sailing Squalo
Рет қаралды 2,3 М.
How to maintain small boat Engines | and what you need to know to fix them
11:47
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
Perkins 4236 Partial Disassembly, Let's Find the Leak (Episode 11)
11:16
Ambiguous Globetrotter
Рет қаралды 1 М.
Replacing the Rear Main Seal on a Sailboat (Perkins 4.108 Diesel)
19:59
Ремонт двигателя Perkins 4.236///большой выпуск
2:17:26
Boat Heating | Hot Water without Engine | Eberspächer Heater Upgrade
20:02
Perkins Diesel Engine Teardown Part 1
12:33
briansmobile1
Рет қаралды 76 М.
CAV Injection pump full strip down to re seal and stop fuel leaks
58:59
Bundy Bears Shed
Рет қаралды 1,7 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН