Perspex 1400mm Black Acrylic Blow Moulded Hemisphere Dome, Plexiglas

[@sidehop]

Never seen moulding process done with non-vacuum but with pressure. This is so cool!

[@dandearman2871]

It's always neat to see how people figure out how to do stuff like this.

[@jonicabeza9983]

Exelente trabajo,desde Argentina!!!

[@forester1]

Wow awesome work

[@mxferro]

How i love plastic!!!!

[@stun9771]

I did something similar with Perspex and an electric bar heater when at secondary school back in 1969/70, but air blowing down into an elongated elliptical mould, to make the ‘cockpit’ dome for a large scale model aircraft...

[@kimmertens181]

does this size come in clear? how does it hold up to temperature change. I was hoping something like this existed. I have a friend how makes outdoor miniature gardens on my property, I consider them artwork. However, in the northeast we get some drastic weather changes. I would love to cover some of these small gardens to protect them from the day to day elements. including animals that like to steal shiny objects. Instead we box them up each fall, clean them up and repaint ect over the winter. What an awesome product.

[@hatnessabletful]

How much thickness decrease has the Acrylic plate shown after blowing? According to my calculations it should be ca. 50%.

[@nacefsofiene4828]

wow...amazing ...what type of acrylic used here please?

[@jra19741]

what was this used for?

[@gautambatwar7231]

Good information sir

[@familyplans3788]

just as in an ammunition factory im guessing paper bags are also banned in your factory too?

[@LogicSpeaks]

Pretty interesting. Have you had one of these blow up on you? Just curious what the limits are when it comes to stretching the acrylic. I've generally understood that it should be heated to approximately 275 degrees - is that right? Anyway, nice work.

[@denverzayden965]

You prolly dont give a shit but does any of you know a tool to get back into an Instagram account..? I was dumb forgot the login password. I appreciate any tips you can give me.

[@zaydkamari3882]

@Denver Zayden Instablaster :)

[@denverzayden965]

@Zayd Kamari thanks so much for your reply. I got to the site on google and I'm waiting for the hacking stuff atm. Takes quite some time so I will reply here later when my account password hopefully is recovered.

[@denverzayden965]

@Zayd Kamari DAMN IT ACTUALLY WORKED :O I literally got access to my ig account details after roughly 45 minutes by using the site. I had to pay 15$ but for sure worth it =) Thanks so much, you saved my ass !

[@zaydkamari3882]

@Denver Zayden no problem :)

[@PerspectiveEngineer]

That's the biggest bowler hat I've ever seen!

[@PeppercornVR]

Damn that's gonna be one hell of a security camera 😂

[@L6FT]

What is the temperature of the oven and plexiglas?

[@BrilliantDesignOnline]

Really clever and awesome :-)

[@garystinten9339]

Could you make a dome big enough for someone to stand under?

[@OwenWithAHammer]

Assuming you're 6", you'd need a square sheet of acrylic measuring 144" (12 feet) on each side. Those seem to be hard to come by, my "local" plexiglass supplier only carries 144x72, but if you where to find a supplier and made a 12 foot diameter large blowing station you could do it.

[@garystinten9339]

@@OwenWithAHammer world record

[@kayakTransparent-r7o]

是的

[@d.e.p.-j.7106]

I wonder what it's going to be used in.

[@mohammedsharuk9296]

where it is used ?

[@hannahroyalty9838]

Could this potentially pop? Seems dangerous without some sort of protection?

[@ahm7944]

Could you make a dome that can be vaccumed to. 5 atmosphere? Or less

[@BettySwollocks13]

What is the pressure you add and what temp in the oven please ?

[@GregBaron]

Is it possible to make moulds of objects or is it just domes that can be produced???

[@leelemon3373]

Plan your work and work your plan. you two have your timing down. dancing with tools.

[@konstantinsolin886]

What kind of glass do u use???

[@potatosalad5355]

Will be Polycarbonate or Plexiglass (Acrilic)....

[@mzahirulislam68]

can we use this type in small submarine ?

[@jeffpickles231]

Hi, what material do you use for the tool /form?

[@WorldwideArcades]

MADE IT 500 LIKES :) YOU'RE WELCOME

[@biennguyen9522]

Cho mình hỏi bạn dùng loại nhựa gì vậy và bao nhiêu ly

[@online12plus]

cool!

[@ozzy1964osborne]

awesome can you make any size many thanks

[@jasminerose2547]

Man in Black franchise must use that i don't know maybe for alien plane..

[@shaker9726]

can i work for you...XD...i want this kind of art to make awesome stuff :D...thanks for sharing

[@SamsLiberty]

You ever have one pop on you?

[@KarasCyborg]

UFO Dome Canopy?

[@SumUnicus]

Do the air u pump in need to be hot?

[@customboatscreensolutions5893]

You need fans to cool at correct height

[@IsraelTangaroaBirch]

How much for one of these?

[@broderp]

Interesting. I'm betting this would be a very expensive dome to purchase. However this video is a good example of how prices are over inflated. There is no high-tech tools required and it does not take a genius to make it or a lot of time. Yet it would sell like it was made by NASA scientists. Sometimes free enterprise sucks.

[@jimbit22]

You know how many variables you have to get right to get this result? I've thermoformed a lot of parts and its not as easy as they make it seem.. Once though you know the workflow and have a stable process you are ok. But to get there you may throw away a lot of money in raw materials..

[@servanttofriend8481]

@@jimbit22 That's why we have KZbin... We watch you guys fuck up, then adjust accordingly.

[@levelup_innovationsllc2044]

Really cool. You need safety glasses though!

[@kellycarver2500]

I wanna know where the rest of the woman is now? Lol

[@FaysalKhalid]

im the 100 one

[@Ebbrush3]

darth vader helmet

[@berterades7445]

Þ

[@MichaelZP1]

Could you make a dome big enough for someone to stand under?

[@kayakTransparent-r7o]

是的

[@kayakTransparent-r7o]

YES