Pete reads your comments!!! Let's go over your questions about Cleetus McFarland's LeRoy motor.

[@jkflorida]

“This channel has tape graphics” literally the perfect reply to a troll.

[@misawajason]

Pete's the man

[@wh0dunnitgaming]

and we love the tape graphics, with the wally-world custom music tracks

[@rpturbo]

Need more of them!

[@benjaminbuffin9812]

Had me in stitches😂😂

[@justinwatch]

I was going to use masking tape graphics for my channel but I couldn't figure out how to get the plastic off

[@BoilerRoomRadio]

Pete....I couldn't give a damn about your filming skills, I'm here to absorb your knowledge on race engines and your musical talent.

[@garrett3689]

Yeah i cant wait to hear what he tells walmart to get them to spit that back at him

[@brvfd822]

This channel has tape graphics… 😂😂 nuff said!

[@Spike-sk7ql]

The whole "this channel uses graphics made from masking tape" was the best reply to that comment. 90% of us dont care about that. We are here to absorb as much knowledge as we can. Not to critique your filming skills. Screw those idiots.

[@ContaminatedCurly]

Absolutely. Pete's videos are good enough quality for it not to get in the way of the content, much more than some other professional racers *cough*jefflutz*cough**cough*

[@60superduty]

💯💯

[@eriklarson9137]

I am an idiot, AND I do care about the graphics. That is why I freeking love Pete and his channel. :)

[@claymillican25]

Yall wanna see some flickering blinking lights just tune into a race and watch the any tree with LED stage bulbs. Before you tell me how to fix it I have tried setting shutter speed to roughly double the frame rate and everything in between and beyond. Whatever yall are complaining about on Pete’s videos I have never noticed. I think we should just appreciate the good stuff being shown to us here.

[@ANotSoHotRodGarage]

Even fox's top notch cameras can't compensate for the frequency of the tree up close. Most don't understand shutter speed to frequency and why led bulbs and Florescent bulbs act as if they are blinking.

[@daddysbrokegarage]

Good on you clay for speaking up. Couldn't agree more. My wife's a professional photographer and lighting is a constant struggle no matter how good one is. Not every light is the same either. Ultimately at the end of the day who cares and why say anything. One doesn't even need to watch sometimes you just need to listen to absorb things.

[@pastaalalamborghini]

Just Clay Millican chillin in the comments

[@johnobrien6052]

Couldn't agree more Clay, those complaining are the one's that can't see the forest through the tree's!!

[@lilhick3]

All the bashing yet here’s clay in the comments lol love it!

[@russcorbin1766]

Pete has the most nonchalant way of saying "and your point is???"

[@TurboDog73TX]

"Psychedelic engine building channel". I am most definitely in the right place!

[@jetsetdnb]

this is exactly the type of oddly specific content I come here for lmaooo

[@cajampa]

Damn right, I knew I liked this guy. And the more I see from him the more I want to know what he is up to.

[@jakvickersmusic]

Pete you do an excellent job of explaining things. People will hate regardless of what you do. It is a reflection of those people, not on yourself.

[@speedyd1971]

I never skip your intro, 🤘

[@64Pete]

People skip the intro? What the heck is wrong with them?

[@johnirwin4420]

Keep doing what you're doing, love polishing turds. You're a real good doer, I appreciate it thanks..

[@nofearcbr]

5:08 😂 that’s why we love you Pete ❤ REAL n Good at doin stuff

[@daleb1225]

This channel has tape graphics.. Probably one of my favorite responses to dumb comment of all time.

[@jeffa7173]

Pete keep on shredding. Your music shreds, your tunes shreds, your builds shreds! Don't let the trolls discourage you brother! I know a lot of us appreciate ALL of your content!

[@PreacherwithoutaPulpit]

Knowledge ✅ Skill ✅ Ability to enlighten ✅ Good Music ✅ Humor on point ✅ Liked ✅ Subscribed ✅

[@MarkTaylor-hv6qt]

Love ya videos Pete, it’s one of the only channels I go out of my way to check to see if there’s a new one available to watch 👍

[@jdub2606]

Top notch response with the, “this channel has tape graphics”. Had me damn near in tears laughing. Don’t change, ever.

[@kpforceone]

Love the content Pete. People that enjoy your content aren’t here for the production value. We are here for the knowledge and you are a gold mine in that regard.

[@brownco_customs]

I get so tired of people commenting on audio etc on my channel. I subscribe to channels for the content, not the production quality. I love the tape and the shared knowledge of this channel great work Pete! Have a great day🤩🤩

[@mre1984]

Your personality is hilarious! Keep it up.

[@C.V._McCullar]

Pete is just a great person. You don't find that often. Add to that his ability, and you have a rare breed.

[@JBNL1972]

Sir, love your intro's, love the knowledge dispensed and the "Walmart music" is epic, please ignore the haters and do your thing!!

[@ira_peavy]

This is a knowledge based channel, not a look at my editing skills channel. I'm thankful you take the time to make these Pete!

[@sparvar1776]

Pete's got it going on folks!

[@BigMikesGarage]

Delta is just a fancy term for variance or difference. The way you handle the insults is great! Love the content. Keep it coming.

[@thesquirrelchroniclesakare7808]

We are not here to see perfect videography we are here to learn about engines ! I think the vids are great Pete. Don’t worry about it

[@Banksy351]

In December last year myself and Robby Abbott was lucky enough to be invited to Eric Yosts home for a slow cooked brisket, after the brisket I have ever had we were joined by Pete for some beers around the camp fire. Me and Rob were lucky enough to hear some of the best story’s about engine building and chassis building from 2 of the best in the world. One of the most memorable drinking sessions I’ve ever had! Hopefully one day I return the favour in my backyard here in Australia. Thanks Pete, love your KZbin channel BTW.

[@johnobrien6052]

Lucky bastard!!! That's bucket list shit there!!

[@Guysm1l3y]

I appreciate your finely tuned level of snark.

[@lyricbread]

Some of those comments had me SMFH. Love what you do. I personally dig the music crossover. Much better than the stock music you hear in every other channel’s videos.

[@brettthunderhead9013]

Love it Pete don't change a f****** thing mate..🇺🇸🇦🇺✊🏻

[@bristol831]

I love the way you said I got better things to do than to get assaulted! 🤣🤣🤣🤣🤣❤ Keep the learning and keep us updated!

[@corporalclegg914]

7:14 any ‘Animals’ Floyd referral is indeed flattering, since dude knows about that record. that era extends to the ‘Live at Pompeii’ days with a badass live version of “Echoes” that should be played in entirety by anyone with ears attached to a heart, at least once or thrice per month by everyone. cool. thanks. you’re welcome. we could all have beers.

[@ChrisHimself1357]

Hey Pete so LED's have PWM (pulse width modulation), theyre essentially strobing so fast you pick that up as brightness. Because camera sensors also sorta work that way youre catching the on off between camera cycles hilariously. Thats why helicopter blades look like theyre not moving if the sync is just right between motion and shutter speed. You'd have to change your shutter speed or go to uhh flourescents again... or honestly just don't care. I'm here for the music and the knowledge and I like how good you are at doin stuff.

[@cranjismcbasketball946]

You turn up the fuel, Cleetus turns up the boost. Its a vicious circle.

[@t_crom]

The video from Pete we didn't know we needed....enjoyed beginning to end thoroughly as usual

[@jcarleezy]

Love this Q&A. Pete is such a good-natured dude and so kind to share his knowledge with the world. The world would be a better place with more Pete's. I bet if the internet trolls tried to be more like Pete, they might actually be able to be good at doin' stuff. Probably never real good... just good. Do better kids.

[@KarolMcDonskee]

I love this crap, and I CAN'T WAIT! for more

[@edellenburg78]

Pete, God you're killing it man. I love how you talk to these clowns with the dumb questions. I could probably never afford a car that is deserving of something you build, but I'm here for the wittiness and commentary. Nice job keeping the clowns in check.

[@mattcouture4285]

Keep it up. Ignore the hate. The vast majority of us love the tech talk

[@misawajason]

Damn, this made my day. Your replies to the comments had me literally laughing out loud.

[@scottsherrard]

You’re real good at responding to the moronic comments. I’m learning

[@chadkutcher8179]

F those haters man I love your channel!!! I've been watching Cleetus for a long time and you are 100% responsible for a lot of his success! Keep up the videos!!

[@Kevytc]

When you think of it as a chemical reaction and not just heat and melting it makes more sense. Your content is gold!

[@prototype3a]

LEDs blink if the driver is essentially a basic full wave rectifier. There are (more expensive) LED drivers and fixtures that do not blink because the driver is more complex and supplies clean DC to the LEDs.

[@jefferyyeager7934]

Knowledge!

[@bryan7866]

Hey Pete, just wanted to take a second to comment based on all the negative comments you showcased in this video. I wanted to shed some light on something immensely positive you do. I am very large in the two stroke world but only learning in the four stroke world.. Your content is right there with Steve Morris.. You both take the time to teach your audience, it's one thing to show what you do or how you do it.. You guys explain why and i cannot tell you how much i appreciate you taking the time to edit and record these videos so a four stroke dummy like me can learn something new.. thank you Pete keep up the good work and stuff

[@johnobrien6052]

Exactly!! 20yrs ago, you NEVER saw a premiere engine builder, yet alone have a chance to interact with them.. I credit Pete and Steve for not only giving us tidbits to think about, but doing it on social media, and being open honest!! Even if they F up, they own it!

[@abelldeez2146]

Content with meaning and knowledge like yours is rare and helping me understand these concepts much better. I appreciate the great automotive channels and this channel is on list.

[@andrewcammer2535]

Pete - this is a such a great channel. Really enjoy the down to earth, skip the BS and get down to business content. The Q/A format in this video was great - engaging with your audience is awesome. I'll look for an opportunity to get a good question in at some point. Whatever you do, don't quit doing what you're doing!

[@freedomfox8183]

Love reading the comments when KZbin experts tell you how to do it better... Gotta admit you don't have near as many as the usual resident pros lol

[@danmyers9372]

Probably because a high percentage of his followers came over from Cleetus’ channel. And we all know most of his followers are pretty ignorant about the technical stuff.

[@johnobrien6052]

​@@danmyers9372well, as a fan of Cleetus AND Pete, I watch them both for the same reasons, no attitudes, no drama, and no BS. I believe both are incredibly talented at what they do, are funny, have a HELL of a strong work ethic, and genuinely treat people rite....pretty good traits if you ask me

[@jacobholstein3813]

I am absolutely loving this content Pete. A "Psychedelic Engine Building Channel" is exactly what I needed. Never realized there were more of us in the center of that Venn Diagram. Rock on brother.

[@kyleblair5004]

Hey Pete, just want to say that I love your content and I think the film quality is fine. You're one of a small number of people sharing legitimately good knowledge on engine building and calibration. As for the music, it's unique and you're massively talented. It's not my cup of tea but the really cool thing is that I can fast forward through anything I don't want to see and the problem is solved. When you're on top, the haters want to bring you down. Keep doing what you're doing!

[@stevenpill6241]

The sarcasm is absolutely as good as the music and the videos!!! Keep killing the videos Pete !!

[@rickybobby0314]

Thank you for your time and talking to us!!!

[@stevemullen8457]

Great sense of dry humor, excellent engine building and tuning knowledge. Really love that Walmart music you play.

[@russellbroadwell]

People that complain about the lighting and the graphics don't get it! I am here for the information and comedy

[@bobqzzi]

Pete has got a great sense of humor.

[@bretttaylor721]

LOVE THE MUSIC AND YOUR KNOWLEDGE , MORE OF BOTH PLEASE

[@rgreen93021]

Such a Pete Fan!!!! Love his knowledge-sharing and such but more importantly.. he's REAL. Thanks, Pete And BTW .. who gives a shit about his lights. It's his knowledge you should be paying attention to.

[@PgUpPerformance]

Good point on safeties and costing races. It's hard to explain that the entire operation is relying a a bunch of relatively inexpensive sensors operating properly.

[@demwillams8898]

Great job, Pete. I like that someone of your immense talents and knowledge takes the time to explain dome pressure or Delta etc... Thanks for all your do.

[@RingTuned]

This is great do this more often lol 😆 I'm glad you explained the instantaneous fall off on the pumps when they run out and explaining safeties and how they can be bad 👎

[@billpotmesil]

Q&A is great! Do it again periodically! Love the channel and wear my HED tee-shirt with pride. Music is great, too! Love the tape graphics and the lights are fine! Don’t change a thing!

[@scottweedon8637]

Love the straight forward answers. Tons of information to soak in.

[@buckykattguitar]

Fuck the haters, Pete! Like 99 99/100% of the folks here, I'm not here for super high end production, I'm here for the knowledge! Watching your videos is as close to actually being in the shop as you can get.

[@dalevines8832]

I love your Music Pete. So many channels today are crap. Please keep doing your thing man.

[@donnaas1]

Pete, obviously there’s keyboard jockeys out there that don’t know what they’re talking about. I love the content you’re real genuine, good dude they don’t love it. They can get off of it. Keep up the good work, brother.

[@pmiller7886]

Pete, thank you for this video, wading thru the smooth brain comments must have cost you a few brain cells😮 i have heard dome pressure a really great deal and never knew what it meant, your explanation was excellent. I could easily do with more of yor' learnin' and cyphering on the race car engines. NC accent is great by the way.

[@raywaage7550]

You got me. I subscribed when you said I would have to subscribe to see if your filming skills improve. I could care less about it, but thought the statement was funny and you won me over. After finishing the video, I have to say I hope you don’t let some of the trolls get to you. Maybe the comments about your intro are music preference or hopefully they’re just complaining about the tape graphics. The music seems like it’s your passion and the footage shows what you’re into. Your music is great and it’s your channel. Tell them to pound sand down a rat hole if they don’t like it.

[@icetech6]

Screw the guys that criticize your videos.. i learn a ton from you and am grateful.

[@gradertfamilymakes]

Pete, its the 60hz cycle on the 110. A good way to avoid that is to use and AC to DC power supply and convert you lighting to DC. Alternatively you can use the RED website to calculate for light flicker. Also, for those who may still be wondering. Delta is literally the difference between two numbers. A pressure of 100psi and 75 psi has a delta of 25 psi. Easy peasy.

[@dmeemd7787]

Minus the people that are actually upset about nonsensical things, lol - the fun trolling that you catch and deliver back (the fun comments/replies), the people that are just genuinely excited and wanting to learn about engines, tuning and drag racing is awesome as hell to see

[@vehdynam]

Pete; you are a patient and knowledgeable man. Thanks.

[@Tinwoodie100]

Pete….mate you’re brilliant, a top notch engine builder, cool musician and entertainer! I also loved the reference to the late Douglas Adam (Don’t Panic!). Keep up the great work👍

[@jizzeldizzle2488]

Your a genius sir. Fuck what they say about the music your work speaks for its self

[@James-tl5gb]

Great video clears up few things from last 1 keep up the good work and love the intro music

[@zacorr1177]

Relating torching a cylinder head to welding is a great reference! 👌🏼

[@benclark452]

Pete, I love how you don't give a crap about KZbin and people with dumb comments! Great content.

[@bullhead360]

I really enjoy your sense of humor, down to earth mentality brother. Keep on doing what you’re doing💪🏼🤘🏼

[@panhagerty5098]

Lol the world's first psychedelic engine building shop. You may be on to something? And to your music, it's awesome, the mix of motors and rock is a great platform. Thumbs up

[@RogerMoore-ne6hu]

There’s only one complaint that I have and it’s that there’s not enough uploads. lol. I could watch your videos all day if could. I learn a lot from your videos. Thanks for taking the time to share your knowledge.

[@QuantumLeap83]

Pete's real good at talking about being real good at doing stuff.

[@fahrvergnuugen]

Don’t feed the trolls Pete! Love your content, particularly when you take the time to explain details.

[@danmyers9372]

Yeah but it can create come pretty good content!

[@ziggassedup]

Don't change a thing mate...Love the tunes...

[@atlasintegrations4114]

Continue being Pete and Doing Good Everything. Takes a pair to acknowledge all voices, though many of those voices are just bluejays squawking for attention because they actually think their opinions matter. Thanks for sharing and don't mind the opening rif because it is like a unique signature. Keep up the badass builds and tuning.

[@VMHP23]

I like your comment… Can you imagine showing up on someone’s personal production and thinking you are somehow important enough or worthy enough to dictate how they do things?😂

[@JB-rp6it]

You’re the man, Pete! Funny, informative, and real good at doin’ stuff!

[@designbuilddrive]

From what I have learned while making videos, there will always be someone who hates something you have done in a video (I'm sure you know this). At the end of the day make what you want to make and if you have hatters, you are growing. Keep doing stuff real good!!

[@C.V._McCullar]

Great job, Pete. Just do you.

[@EricksonMachinePerformance]

Thank you for sharing your knowledge. I find it comical people complaining about video quality. Great info. Thanks for sharing

[@CaptainNero]

Thank you for the youtube education. I look forward to class being in session again soon.

[@ryanturner8318]

That was the most awesome reply I’ve heard all week. Love the tape stencils comment you gave!

[@dapickle6128]

Honestly Pete’s videos are like asmr to me. Seriously relaxing listening to a dude that really knows what he’s talking about and don’t have the biggest ego about it

[@simpleman2004]

I like to listen to someone who can explain things, without making crap up. I liked this video

[@pattman96]

This is by far the best channel in KZbin by far!! The music Is like weird Al was into racing car's 😂! Pete your the man!!

[@MichaelAverycarhauler1969]

Do some more real good stuff Pete! The replies to the trolls were priceless!

[@scottr9900]

Great episode. And I ordered merch from Pete, there was an issue, and he sent an extra shirt. Dude is legit.

[@scottr9900]

Was it the heat in the motor that caused the rods to let go?

[@ni_wink84]

You’re the best Pete! Don’t GAF what anyone else says, and love all the music, I’ve been asking for months if you will ever put it out so we can have it has ring tones etc!

[@thezacgorac]

Top quality content. Your intro is my daily alarm. Gets me pumped for the day.

[@brianfoshee2775]

Pete you are real good at being a genuine person

[@dvkkp61]

“I got other things to do besides be insulted” Fucken aye you do, keep it up! 🤙🏾

[@64Pete]

Stay busy brother... always a pleasure learning from you. ✌ 🇦🇺

[@markhatcher4325]

I come here to Learn cool new stuff and Your Knowledge and Leroys engine build 👍😁👍

[@mikeh.748]

As the old saying goes, opinions are like a holes, everyone has one. Do your thing Pete. Let the not so nice comments slide off like water on a ducks back. Your videos can be perfect and there’s always gonna be someone looking to cut you down for whatever reason. And as long as you like your music isn’t that all that counts at the end of the day? It should be. 👍

[@Sypher474]

Rude as some of those comments were, intro guy is accidentally right. Viewer retention metrics on KZbin did away with long intros a long time ago, and you'd likely see increased channel performance by killing it off. Cleeter has the perfect format nailed down, straight into the video, quick splash screen after setting the scene, onto the action. Then you can have as long an outro as you'd like. Something to consider. Full support for using your Walmart purchased tunes in videos, adds great flavour to timelapses.