PETERBILT 379 6NZ PROJECT BACK IN ACTION!!!

[@glennrobichaux7490]

Pro tip. Keep the caging bolts in you sleeper or tool box. Don't have to worry about them disappearing going down the road

[@ky.gambler5281]

Suggestion, single round headlights on a dropped mount, led also. Lots of wasted parts on the rear axles if you're thinking about replacing them. Jack up one side, both axles same time, makes things go a lot easier, you're not chasing tools around the truck...take out the caging bolts and put in sleeper box, more handy.

[@austinkazmierski9607]

Loving the bs-ing, Lil more laid back.

[@stanlucas1932]

A standard pair of channel locks is all that's needed to do a brake job. Once the drums off takes less than a minute to remove and replace.

[@precisiondiesel225]

Silent Mike is the only other person that I’ve came across that puts brake shoes on the same way I do. I don’t put the rollers in until the big spring is connected. I’ve been working on trucks for 17yrs and I’ve seen many of ways guys put shoes on. The way I do it is the same as Mikes, by far the easiest way and no bullshit special tools needed.

[@wirenut003]

Lots of talent Mr Mike a man who does it right.

[@jasonmyers3847]

YAY! The real important project is being worked on, again!

[@smcox1991]

Definitely need some Alcoa durablacks a flush mount deck plate and some double hump fiberglass fenders with a rear t bar and front t bar.

[@SUBI_PaT]

Silent Michael hit it with his purse an o’l yelllllller took it off😂😂😂😂😂😂😂😂😂😂

[@skylarsmith4508]

For the special toy for the springs just take a pry bar and cut a slit in the middle works the same.and if you take a pry bar to the two small springs for the breaks and just hit the inside of the spring takes them off. For break adjustment 1/4 of a turn for the drive drives and 1/2 a turn on the steer brakes

[@Gmurphy84]

When you cut the stacks cut them at an angle, they look much better that way

[@Duramaxjon]

No that’s what everyone does, flat looks way better

[@yepitsme2536]

@@Duramaxjon agree 130% flat looks way more b!tchen

[@timmydemattos691]

I’m a fan of the flat cut

[@frankboggs]

Always a good project when u get the torch out......

[@psavel274]

Awesome shit!!! This baby is back! Great news about the 18 speed! Was gonna ask if it was still an auto and you answered it for me. She still looks as great as I remember when I saw it last. Shop is going to be sweet when it's done. Wish I had the property to do something along those lines. Very cool seeing the Pete back in action!! 😎👍💪

[@chrisy2560]

I have done this more times than I care to count have to love big truck breaks

[@tyolson70]

Haha you and me both becomes mindless at some point especially doing full brake jobs on a 92 wheeler

[@Gentryandsons]

Beautiful truck

[@clustig95]

If only i could have Greg A + Silent Mike around for all their combined knowledge would make everything easier and more fun! Keep up the good work fellas

[@Dieselfueladdict]

Greg_a mentioning my man Russel the Road Side Repair man 🤪🤪🤘🏻🤘🏻

[@jellenauta1044]

Don’t cut the stacks!! Just lower the truck on 22.5 low pro’s.

[@ruralram100]

I agree don't cut the stacks. That look is sexy as hell. Definitely need to put 22.5 low pro's on.

[@Andrew-mr4cj]

@@ruralram100 I honestly agree as well but either way even if he doesnt still going to be super cool

[@Wickedtrucker75]

Yep so the can get bent ....

[@colezablotney578]

I use a vise grip on the two smaller springs on the brake shoe and pull them into place, much faster and easier thank trying to pull that big spring. Also Greg bring the Pete up to North Dakota, I work at a frame shop where we often stretch trucks!

[@scarface-39]

Is there anything that Silent Mike can’t do?👍🇺🇸

[@spencerlucian4843]

i guess I am kinda randomly asking but does anyone know a good site to watch newly released movies online ?

[@jadenreginald8991]

@Spencer Lucian lately I have been using Flixzone. You can find it on google :)

[@brentleydaxton5478]

@Jaden Reginald definitely, I've been using Flixzone for months myself :D

[@spencerlucian4843]

@Jaden Reginald thank you, I signed up and it seems to work :D Appreciate it !

[@jadenreginald8991]

@Spencer Lucian You are welcome :)

[@jonathanreimer6882]

Always turn your slack adjusters back before smashing around with a sledge. I repeat always.

[@ianatkinson8464]

Always enjoy watching you work even if I have some idea of what you are doing😁

[@nathanjones5653]

You going too do some full fenders on the Peterbilt?

[@austinholloway7553]

18 speed all the way you will really enjoy that transmission

[@loganthompson3224]

Loved the “one or two” had me going lol watching every video and getting your inside jokes are the best

[@Soy.Jesus_]

Greg is such a dad😂

[@brianherron5400]

Nice job silent Mike 👍

[@williamcordle]

Are you going to do in floor radiant heating in the shop I think it would be a great solution for heating the building from the slab up and do forced air for cooling

[@johnnygearjammer]

I used to haul brake drums from East Jordan Iron Works in Sunfield, Michigan to Webb Wheel in Siloam Springs, Arkansas

[@SUBI_PaT]

The Johnson rod 😂😂😂😂 leave it to silent Michael to explain the Johnson rod 😂😂

[@matthewthompson9531]

the stacks look good the way they are.!

[@jeremynorwood4658]

15/16 combo wrench and make a slice in the box end across from the handle( a little wider than the center bar of the spring) and it will make your life a little easier. Make sure it’s a harbor freight wrench. It’s a lot easier cutting a 15$ wrench than cutting a $60+ wrench. Just a little knowledge

[@justinnickles5924]

As the brake chamber is pouring air and being the reason it’s not releasing

[@Wickedtrucker75]

I wonder why that brake is hanging up?

[@precisiondiesel225]

I was literally about to comment on the busted brake chamber.

[@justinnickles5924]

@@Wickedtrucker75 the air is by passing where it needs to be so it ain’t letting the pod completely release

[@Wickedtrucker75]

@@justinnickles5924 so you know my comment was pure sarcasm ...but thanks for the lesson on how brakes work!

[@justinnickles5924]

@@Wickedtrucker75 hell I was just trying to help lol I didn’t look at your profile

[@adambrink4475]

Yeah!!!!!!! On the 18 speed!!!!!!!!

[@smithjos002]

When doing that put the red spring on first, both rollers on each brake install the shoes and then put the orange ones on with a screw driver

[@brendanmcduffee7636]

love peterbilt greg it turnning out to good tell mike he did good

[@adambrink4475]

Love the banter

[@petrinkyle]

Love seeing this truck can't wait to get my own semi to play with

[@AquaSourceLLC]

Orders in, I’ll be that way at the end of the month. I’ll just grab the trailer then

[@ThanatoViper]

Made me happy he used antiseize on the drum. How many times I've seen them completely stuck on the on the axle.

[@koryphillips1973]

hit it with a sledge it’ll come off

[@ThanatoViper]

@@koryphillips1973 had them still not come off. Had some auction trucks before that have clearly never had any maintenance work done.

[@andrewboyd5826]

I wouldn't cut the stacks either unless ur not going to be able to clear under things but defently leave them as long as possible 👌 silent mike knows his shit lol some people do the breaks his way and some people do them in other ways me personally I connect the big spring to the shoes and then put them in place, I cut a notch in a prybar makes it pretty easy that way I find , can't wait for the 18 speed install!!!

[@mrpipefitter9963]

It’s illegal and they won’t fit under overpasses

[@GregoryMallard]

The new shop of yours would look awesome in Farming Simulator 19!

[@durflinger92]

Love the joking around and finally getting an 18 speed

[@twintibbsdiesel93]

Diesel is for Brother's ! Doesn't matter what Brand Diesel as long as Brother's Stick Together !

[@guntherflume7129]

The Elephant in the room (yard) nice white knight

[@jasonmyers3847]

YAY!! A real transmission for a change.

[@alexgrider276]

You both make it look so easy 💯✔️✔️✔️✔️

[@Dieselfueladdict]

Damn Greg_a rocking them 20s in full Flex 🤪🤪

[@edizzle891]

Silent Mike's personality really shined in this video hahahaha love it

[@solowyota1]

Danggggg Moc Toe boots and not the Supra’s per usual? 😂

[@lyndonhamby7432]

Heck yeah. Time for the Large Car 👍

[@ramsandrzr3706]

Your little girl is getting big 👍👍👍👍

[@israelruiz8731]

DON'T CUT THE STACKS! that look is sweet.

[@that_blue_lbz_duramax3364]

Not a legal height. If you are over 13”6 you will most likely catch a electric wire or a bridge

[@leviboggs8523]

You can’t do that

[@landenmyers8769]

You have to cut them

[@leviboggs8523]

@@landenmyers8769 I know

[@gaiaalfa9949]

Yeah man it looks good can't wait for the next peterbilt video.

[@bobsethbroc]

Put the old school flappers on the stacks, have silent Mike fab them up..

[@Wongigigi]

Still surprised Greg hasn’t slapped 5% tint on that bad boy. Let alone 20% On the windshield

[@jjgarcia1013]

Greg's actually wearing something other than Supras! Great episode!

[@stuartmorey870]

Damn I love that dirty Pete is coming back!

[@ruralbuckeye1200]

Brakes and lights still have to pass DOT everything else is ok. Farm trucks fall under the same as personal use class 8. You don't have the same headaches as commercial otr. Mike knows his stuff. Was he a former otr mechanic? I don't miss otr equipment is much less of a headache lol. The Pete looks good

[@HammerHead524]

Greg has new kicks on!! 😆

[@RCman9291]

I love the stacks bigger the better it needs to have a bigger turbo tho or something to wake up that turbo spool

[@chrisy2560]

LOL I think I finally have something I could teach silent Mike and Greg a faster way to do breaks

[@codyturkette7759]

For realll🥴😅

[@brentmunro3062]

I like to grease the s cam really good and roll it over a 180 degree,it will go another 300k

[@gates_e2264]

Same way we do it at the shop I work at. The tools I found suck. But thats just me

[@90TBD]

Silent Mike reminds me of my dad. A quiet smart ass that loss anit seize! 1

[@ramsandrzr3706]

Love it my dad was a truck driver I grew up in a big rig your the man bro so hope I win trailer would love to meet you in person

[@madduball9998]

In orderto keep the birds from messing up your box steps you might want to cover them up with a blanket or some rags

[@Shakira_6.0]

I bought a nice hoodie so I'll be happy either way. That's 3 products of yours that I'll be rocking

[@jokky231]

Yeees!!! Giv it som more love greg

[@paulschneider5636]

I would avoid the torch on the old springs for risk of damaging the wheel seal.

[@tyolson70]

Or the s cam seal

[@georgecostanza9387]

It not gonna get that hot he held the torch there for like 5 seconds

[@Andrew-mr4cj]

Received the merch I ordered today finally was able show much love for my favorite channel an guys to watch either way got myself lil early birthday present for on the 19th

[@MrCstone1]

still waiting on mine = (

[@Andrew-mr4cj]

@@MrCstone1 hopefully it won't be much longer for ya I ordered on Friday or Saturday an I live like 2 an a half hours northeast of greg in the same state

[@MrCstone1]

@@Andrew-mr4cj I live 2 hours north of greg

[@Andrew-mr4cj]

@@MrCstone1 hmm idk coulda been what I ordered why I got it so soon all it was lanyard and one of the keychains but who knows people due certain things when it comes to shipping

[@mikemccallon6957]

Work smarter not harder. Plus time is money.....

[@elmerobajo]

GREG, GREG, GREG...Please do NOT cut those Stove Pipes down! Leave those bad boys up there right where they are!!!

[@oni_ghost99]

Looks amazing

[@stevevandine8592]

Just take pry bar and pop your springs off but your shoes are fine looking I'm guessing you've got brake cam bushing issues or brake pot or quick release valve issues if they are hanging up your shoes weren't worn bad enough to cam over and hang up

[@nolantorrence7124]

Love the Pete so much

[@Dieselfueladdict]

Greg_a with the McDonald’s Shout Whoop Whoop 🥳🥳🤪🤪

[@timkerr2349]

Like ur channel. Been a Cummins fan for 20 plus yrs. But would be cool for more feed back from u as a subscriber

[@christiannash1719]

I recommend getting mics that you can have on your person for you and silent mike so the audio quality is better and If you have the camera at a distance from him we can hear easier and he doesn’t have to yell.

[@daleranger8246]

You should take those faded PJ trailer decals off. And put your logo there. You know we all weanna see the PETERBILT wheels. Mike needs a raise. 🍻 You know silent Michael is good when he gets to drive is trucks. Can't say I've seen anybody else but Ally*

[@alanbradford3130]

A sledge hammer and the "blue wrench" do NOT make for a boring video. Just sayin.... Unless its me having to use a hammer myself. Then it sucks because something is stuck and won't come off.

[@rickymitchell7586]

So how far does Mike's capabilities go? Very nice and fun watching you guys

[@brandonfloyd6321]

Old drums make good jack stands and grinder stands.

[@deandrecook3945]

First and the peterbilt looks nice as always

[@mconfluence]

I think the trailer should be delivered to the winner with the Big Pete

[@GuillermoLopez-my1dj]

Leave them like that bud they look clean

[@79Z28Hellion]

What I want to know, is what did silent mike do before Greg_A Enterprise’s. Lol the man is a wealth of knowledge.

[@durflinger92]

He was with kingspeed

[@79Z28Hellion]

Ahhhh Silent Mike was KingSpeed! Totally makes sense now 😂😂.

[@doughamm5590]

Just take the couple inches off and leave the max that u can. The old drums make good small fire pits

[@danequalls2926]

Lmao torch to remove breaks. Flat head or vice grips are proper procedure. I made a little tool outta a old pry bar that hooks the two springs for removal and installation

[@danequalls2926]

Btw the easiest way to install is to pull the big spring on two shoes slap em on scam then install 2 outer springs. But I like Mike's method lol

[@korbinstudnicki3510]

Finally!!

[@Corndog402]

For future reference, please be safe and cage the break chambers

[@adielcerriteno1990]

Finally got an 18 spd... but we wanna know if u can drive it right 🤨🤨🧐

[@CarsTrucksWhatever]

He doesn't need a 18 spd he can probably get by with a 10 spd or a 8 spd

[@adielcerriteno1990]

@@CarsTrucksWhatever nah man those r lame 👎🏽👎🏽 A 13 speed would be perfect. The 18 really is unnecessary but u can just skip the splitting in the low gears and only split the highs. But regardless it’s about being cool not necessity. And 10spd or lower ain’t cool lol

[@CarsTrucksWhatever]

Look here SuperTrucker no need for a 13 or 18 spd because he is not doing anything thing remotely heavy he pulling a couple of Dodge and for the fact he doesn't have much experience with a big Truck a 10 or 8 spd is perfect

[@adielcerriteno1990]

@@CarsTrucksWhatever ur right steering wheel holder. But I said 10 and under arnt COOOOL. 13 n up are even tho they’re not necessary. Key word is cool my guy.

[@CarsTrucksWhatever]

@@adielcerriteno1990 Steering wheel holder that's lol 😆

[@troyarneson3280]

Greg was that Milwaukee impact wrench 3/4” or 1”. I would like to get one. So I can change tires on my truck.

[@vendetta1306]

That truck better have a dang Cummins in it

[@airammundo9544]

6nz cat in the pete

[@TheLargecars]

Thats all fine and all but i think we need some train hornz

[@jesserasso1042]

Like an rv hauler

[@MrBoyRc]

I love your videos, but I already do enough big rig brakes at work

[@crossroadgaragellc]

are those 14 ft wide doors?

[@arrowkart4j]

I take those back off bolts out and put them inside the sleeper or glovebox.

[@anthonyaubuchon765]

I just keep a couple of cage bolts in the top of my toolbox.

[@davidcornelison5453]

Either way, I never put them back in. Never.

[@jasonmyers3847]

Why are you going to shorten that beautiful exhaust? It fits in the shop.