Peterbilt Log trucks, hard pulling

Just nothing but raw power in this video
Prize package video- • Nearly turned a Peterb...
Cotontop3 merchandise- cotontop3.com/
My Amazon Store- www.amazon.com...
Acme tools- shrsl.com/19ks2...
/ rotobecmarketing
Guardian Angel link & code- www.guardianan... Coupon Code: 146CLIP
#peterbilt #logtruck #bigtruck

[@joshjones3408]

Walking the dog an kicking that cat I haven't heard that sense I was a kid riding with my uncle..he drove for Danny Sandusky logging in collinwood TN.....but proud to say am watching now from petal MS 👍👍👍👍

[@cotontop3]

Good stuff 👍🏻

[@jasontengan1233]

Did the same with an old 4300 Transtar with Reyco suspension, 4th to 1st on a 13 speed, only one could make a hill, the rest of 5 semis had to dump their asphalt on the ground and feed the spreader with a backhoe, oh the memories!

[@dennispalmer6007]

Drove a 10 speed pulling triaxles thru the Canadian Rockies . Weights up above 100,000lbs. When you went from a 6% to a 8% grade you needed to to drop from 6th to 5th. That was a butt clincher. Got lucky and never missed one, but lots of guys did and their crawling up the mtn in 1st or bull low while a bunch of idiots getting impatient that were hauling light and forgetting about the time they messed up screaming on the CB. 13 speed cured that problem.

[@Gen3tx]

I was laughing hysterically at “He isn’t gonna make it” “I wouldn’t hit at that speed for sure” “Well he made it”

[@cotontop3]

🤣🤣🤣

[@dexhummer1]

Skills and experience!!! Awesome video Tim...i couldnt have a bigger grin on my face from watching that hill climb!!!

[@Seveneleven44]

I used to run crushed glass with a daycab freight liner Columbia and a pull behind roll off trailer. 475cat with a 10 speed. I live in PA and there isn’t anywhere I went that didn’t have a long 6-8% grade pull of over a mile, especially running route 42 over the coal hills to get to interstate 80. One hill was a “don’t miss a down shift hill” purely because if you miss a shift, you either ruin the truck or have to go the rest of the way up in creeper gear. I’d be doing 32 mph with her screaming at 1700rpm and the fan switch ON. kitty would just pull and pull.

[@scarface9617]

haha! “walking the dog.. kick that cat.. come on Back!”💯(🤝)

[@appleknocker]

That’s what ya call grabbing a downshift baby. I missed that shift in an old Pete water truck one time and had a hell of a time getting moving again. Great vid man!

[@garypollard9770]

Love the sound of those str8 pipes! Loved hauling logs back in the 70’s when still had logs to haul.

[@steved.5628]

I could watch this all day man , get it get it

[@derrickpettit3489]

Bat to the bone, Scott is a heck of a driver, that was cool thanks for sharing Tim have a good one 🚜💪🌳👍🌲

[@michaelbaumgardner9493]

Good evening. Start sliding in the truck and trailer. Pucker big time. Good driving Danny and Scott

[@derrickpettit3489]

Can't tell you how many times I've watched this video, love that sound of that Pete, man he can drive

[@paulirving4151]

He hit 4th gear and hit 2nd gear that dam good driving.

[@brentmedders]

I like how you said I’m not sure about all that speed on that hill. Then Danny said hold my beer and hit that 4-2 downshift while letting her eat non-stop!! Wayerhauser should give them truck numbers 1 & 2.

[@cotontop3]

Lol you pretty much nailed it!

[@johnwhicks8687]

Awesome video. Scott was definitely kicking the CAT. That’s tuff working conditions

[@jamesrobertgrimes]

As a fellow driver that hill is a killer. You can cowboy up it but there stands a good chance of a busted driveline in the process. Take it easy and just take the push isn't as cool but the truck will live.

[@daniele.woodhead1218]

That movie is deja vu I can remember those days myself pushing and sometimes pulling some trucks. Grandpa said raining snowing he didn't care those logs had to go. The good old days.

Nothing like a E-Model Cat and a Set of Straight Pipes. You are right, not a lot of Gear Jammers can do that.

[@joshuasauer423]

Those trucks sounded great!!!

[@CarterWHern]

Talent can not be denied.

[@Joelontugs]

You know a video is going to be good when the first thing that’s said just don’t turn us over lmao

[@latoacwoad]

Enjoyed the live feed before this. Looking forward to this!

[@josephboley]

Nothing sounds as good as an ol Pete.

[@kevinbachmann3040]

Log trucks i think are one of the most powerful trucks on the road today

[@abikerinpa]

Kevin Bachmann shhhhhhhhh ........ don’t let them know that lols 😂 ( p.s. look up JF logging as well on KZbin )

[@kevinbachmann3040]

Im in the northwest so logging is just a bit different

[@abikerinpa]

Kevin Bachmann I know the feeling brother , I’m in the northeast and done some logging myself 😎

[@kevinbachmann3040]

I have family that's in logging

[@Fernandoh183]

Love the sound of that Maroon straight pipe Peterbilt. 👌😍

[@johnwilloughby9712]

Great video Tim, you got a workout today be safe and have a blessed day!

[@cynthiaherr9029]

🤣🤣Tim you kill me..He ain't gonna make it..Let's go git him.. Great video Tim, Have a great day or a slippery day..Good one Tim..

[@steelhorse4524]

Sounds like a cat engine. Love the sound of the cat engine

[@jamieangus4413]

Watching this as i wait to be unloaded at mill myself in aus

[@richardlenz7579]

Being from Tuscaloosa, I can understand the hills y’all are trying to pull. I work in Brookwood doing service work for the coal mines and the places we have to go is a lot like where y’all log.

[@michaelnelson4576]

That’s sticker peckin out stuff right there!

[@magnoliascreens7469]

Used to hunt near Quitman @ Greasy Creek. There's a hill over there that makes this one look like chump change. Between the soap stone and red clay, it was a beast of a hill. Bumpy as heck - you needed speed to make it but you were gonna bounce around. One guy was 6'2" and after going up that hill, he was forever more... 5'9". We called him 'no neck' Lol

[@mitchtucker5768]

I remember when Jay worked for JJ Pryor. I worked on both phases of the 45 job between Aberdeen and Columbus.( Columbus to lackey and lackey to Aberdeen). ask Jay about the crane they lost in the Bartahatchie!!LOL hope all is good with him and keep the vids coming!!

[@SLCFarms]

that Pete sounds awesome pulling. video and a live in one night awesome stuff.

[@SLCFarms]

my dads favorite movie is Groundhog Day.

[@SLCFarms]

what an awesome giveaway.

[@tmacie2]

Yep, the movie was Groundhog Day with Bill Murray. When that happens to me (going up and down all the time) I say I feel like a yoyo.

[@bobraymond6135]

That is some awesome power man!!!

[@tannerdamico9895]

Man that truck sounds amazing

[@guido2110]

Just go's to show them guy's got there truck broken in right, an they can drive ! Good video!

[@AaronTheViking250]

that dozer is getting its workout today hey lol.

[@tonyanderson6493]

Them Petes sound great

[@craigcowan4902]

That kitty was purring rite up that hill there’s nothing like cat power and good tires.

[@jamieangus4413]

The guy in first white truck smooth on the gear

[@metlmuncher]

My sticker is fully pecked out now.. Damn son

[@jasonboyce424]

Great video today Tim.always looking forward to the next video.

[@woodsmen17]

Them E Block cats sure sound good

[@leustad]

I'm not trying to compare a game to real life but after playing Snowrunner, it made me realize that most of these real life trucks doesn't come with AWD and those crazy good mud tires. Which is shame !!

[@Alex-uy7pc]

I know this is an older vid, but in my f550 I put a pusher fan infront of the intercooler, and when I went wide open it turned it on for 4 minutes (just a switch under the pedal and a little 12v timer switch, also had a constant on switch) eventually I got a bigger intercooler and didn't have the problem anymore.

[@EddieDaOnly1]

I swear we Texas boys are just like y'all.

[@waltermattson5566]

Would you consider bringing your four wheeler or Ranger to these jobs when you have to do so much walking?

[@akersjon278]

Ever tried to put down a load of wood chips on slippery turns/hills/loading areas? Maybe a good idea to buy a chipper. The material you produce but don¨t use to cover muddy roads, you can sell right? Merry X-mas and a happy new year!

[@williammatthews2948]

You got a workout on this one. Lol. Have a blessed and safe weekend.

[@biomass210]

Epic video. The first 5 min was bad ass

[@deuntewilliams9384]

Man I miss the woods

[@juniorraines1042]

Awesome video that is some great truck driver y’all have enjoyed the video

[@CumminsN14DBest]

*" You Better Get it,..{Engine Brrrrrrrrrrrrrr Shift, Rooommmm! ) What Um Tomb bout,...Get it Baby,.. Listen at It!!"* {My Southern Brotha With That Southern Draw Voice lol) From One Trucker to another, I'm Soooo Subscribing!!!

[@kevincarver6727]

Great video Tim 👍👍👍

[@thimmpy]

Are those trucks running som weak rearends considering they wont even use the centerdiff going up those hills?

[@mikehornsby599]

Great job enjoyed that!!!!

[@jamesparksparks8873]

Nothing like a 🐈

[@patkelly7999]

Great stuff Tim, well worth the wait, You have some serious pilots driving for Ye:):)

[@anthonyholmes71]

As always, this is a great video. Your live video tonight was very funny.

[@FollowYourObsession]

I had my Bluetooth speaker on for this video them pets sound good

[@jamieangus4413]

Man he can downshift

[@ShystySpokes]

And what’s the gross weight on that hayrack, 88,000 we’re running 105,500 stretched out with with 45 footers.

[@kirklatham1178]

I drive big truck for a living. Shifting is the easiest part to me.

[@bradnavratil5502]

He should have had his Lockers in at the bottom... you don't wait until you spin out and then put them in wow lol

[@Burnsed]

that looks fun

[@68lonestar]

So what is the actual l benefit of a track loader over a trl mind with delimber

[@jkorpi79]

Groundhogs day with bill Murray

[@montygomez495]

That on hell of a driver to shift like that on that hill...other drivers would of had that drive shaft and rears smashed to pieces...

[@bubbarickard]

sometimes in my concrete truck when in daught throttle out

[@adamsimpson7610]

Just goes to show never underestimate semi

[@abikerinpa]

Lmao .... loved it ! Even hit the like button on this one ... 😎 Keep the videos coming my friend, be safe out there

[@johnrtrucker]

It dont look bad but I know that hill is a B-E-A-S-T! From one driver to another, Danny mr. Red pete, great job on that hill especially the shifting I been in similar circumstances and to get that skip shift just right takes skill, a skill these new automatics just dont have I'll never own one you'd never make it unassisted up that hill in a 2020 cascadia darn truck would go limp as a boned fish just lookin at that hill 😂😂

[@jakekirby5842]

Did y’all ever put a undercarriage on the JD 850?

[@jeffcharley3195]

What rear ends y'all running with the 18 speeds?

[@cotontop3]

46’s are in the 18 speeds

[@jeffcharley3195]

Sorry Tim I should have been more specific. What gear ratio do y'all run?

[@ShystySpokes]

Idk where this video as taken but you come do some logging in Washington and you’ll see real quick what a pull coming off a landing is like.

[@jerryhicks95]

Earned your supper today!

[@KingGoRealLa205]

Walk the dog, kick the cat! CT3 that's man stuff!!

[@simonbailey1345]

If you put Road grade Filter Fabric down and then put your three in crush on top of that you'll have a road that'll last no problems built too many roads in my in my day

[@Joelontugs]

Dude 4th all the to 2nd is what’s know as the money shift I didn’t know you could do that and not explode a transmission

[@nathanbrodeur]

Ground Hog day I believe that is the movie your thinking about Tim

[@briangardiner1015]

I don't know what sounds better those Pete's or the 635.

[@williammatthews2948]

Brian Gardiner It's hard to choose.

[@mitchtucker5768]

couldn't you knock the top coupla inches of mud off that road? maybe got down to some drier stuff

[@cotontop3]

There is 3” rock on the hill they’re are running on and that would be a lot of money to push that rock off.

[@mitchtucker5768]

cotontop3 Roger that!!LOL

[@cntslesfabrication]

Do you guys ever have problems with people messing with your equipment out at job site?

[@grantodom7867]

That make ya sticker peck out right there

[@johnwesley966]

That’s so cool I’m going to Americus Georgia for the South Georgia tech program for John Deere working on tractors so I’ll be working for flint equipment ag and turf supposed to be leaving in August to live on campus pretty soon but I wanted my grad present to be a valve cummins 😂 looked up to cotontop3 as a role model believe it or not but when I finish John Deere I wanna go into forestry which it’s two years for a program at South Georgia John Deere

[@tylerrathbun3156]

Walkin that dog kick that cat!!

[@midwestcatz5896]

youd think they would have a little better tires on them trucks geez...................

[@colinkennedy8730]

Cat power nothing like it

[@josephboley]

Hello

[@trevor7918]

Good ol dozer wozer......

[@talituipulotu4379]

Just know your rmp that all

[@pierreleduc4394]

groundhog day lol

[@carlwilliams8354]

It’s a shame the all the new trucks being made don’t have Cat power! An X15 Cummins and DD15’s just don’t sound as good and who wants all the EPA crap?

[@codymoore3464]

Hey everyone the name of that movie is happy death day when everything happens again

[@borderreiver3288]

A TOP TRUCK DRIVER IS WORTH HIS WEIGHT IN GOLD AS THEY GET THE JOB DONE EFFICIENTLY AND QUICKLY...

[@tonyanderson6493]

Good ole crack wagon

[@jamieangus4413]

Boo ya