Peugeot 2008 Rear Disc and Pads and Wheel Bearing Replacement Overview

This is not a super in depth guide but it does show you have to replace the brake discs, pads and wheel bearings on the rear axle of a Peugeot 2008. This is a similar design to many other Peugeots.

[@chemistry636]

As always, great tutorial and some good camera photography.

[@maxautouk]

Thanks for the comment mate good to hear from you 😄

[@timmyhalliday8214]

Looking good in the new colours!!! 😊

[@maxautouk]

Cheers me old fruit 🍌

[@PiggyPower]

Best thing about coming back to a car you've worked on ... ... Wheel stuck on 😂😂

[@maxautouk]

That’s just a given in Ireland bro

[@PiggyPower]

@@maxautouk sure sure 🤭

[@maxautouk]

👀

[@ironiironi6347]

Thank you 😊

[@maxautouk]

Thanks

[@leosedf]

Dude, the 2008 doesn't have lifting points on the back or front, am i wrong? They are only on the sides.

[@maxautouk]

I cant remember where but i did find somewhere to put a stand when i did a rear exhaust on one of these

[@PiggyPower]

You have a cameraperson now 😮

[@maxautouk]

If you move over you can be my cameraman too 😘

[@PiggyPower]

@@maxautouk not got the mad wicked skills of this guy

[@maxautouk]

💪🏽

[@matroll2]

What if i changed brake disc with bearing because it was excessive play on one side for two new ones and it still play on same side it was before even i changed the sides of new discs to check it's that bad bearing but it seems both bearings are good. What to do now ?

[@maxautouk]

If the wheel moves and the caliper doesnt then its play in the wheel bearing Its both impossible for new parts to be faulty

[@matroll2]

@@maxautouk i solved the problem by adding more torque to hub nut (I bought long breaker bar).

[@Coops95]

What size socket to undo the brake disc??

[@mattbuckels46]

Same Q here. I had read it was 32mm but doing the job today it is larger.

[@Coops95]

@@mattbuckels46 it's 36mm mate found out of another video

[@maxautouk]

Hi yea it is a 36mm hex nut, 38mm on some models and 40mm on the picassos