Peugeot 308 T9 Replace Clutch Master cylinder and pedal clip

[@friendlybucket7268]

Nice tutorial 🎉❤❤ is it the same with t7? I have a problem sometimes the clutch is stuttering back in it's position incorrectly, especially when I brake and clutch and go off the pedals ..maybe I have air inside the brake fluid?

[@AdrianDragan]

Hello. There can be multiple causes for this problem: air in the clutch system, worn clutch bearing guide lever, master or secondary cylinder with wear and no longer working properly. Removing the pedal from the 308 T7 is pretty much the same operation as the T9, although so far I have not removed the clutch pedal from my T7. Maybe in the future I will make a tutorial.

[@codrucody4103]

Bun tutorial! Multumim Adrian!

[@AdrianDragan]

Salut! Trebuie sa pui un tester dedicat Peugeot pentru a afla cauza erorilor, la fel de important este sa ai si un meserias bun care sa interpreteze erorile.

[@luidzi1]

hey, thanks for the vid, good job! I have the same problem with C4 Picasso 1.6 HDI, just thinking how to fix this. 105000 km. Either clutch master cylinder or possibly the clip... tbc! thanks!

[@AdrianDragan]

Hello. I was prepared to change the master cylinder as well if necessary, and look, it was necessary to change the master cylinder as well. Just the other day a friend with a 308 had the same problem, he only changed initial the clip but the problem was with the master cylinder. I think you should be prepared to change both.

[@luidzi1]

@@AdrianDragan hi Adrian. How were you able to tell the problem was not with slave clutch cylinder instead? I inspected mine, it does not show any leaks, so I suppose it will be either clip or master clutch cylinder as it was in your case... thanks!

[@IvanBoiko-w8p]

Hello! Is it necessary to change the master clutch cylinder?

[@AdrianDragan]

Hello. It is not always necessary to replace the master cylinder, but I had to replace it.

[@IvanBoiko-w8p]

@@AdrianDraganunderstand. Thank you. Do you have any issues with the smoothness of changing gears? I have already changed a clutch kit and a pedal clip before. Nothing helped.

[@Rafal-f1d]

Don't you need to bleed the system?

[@AdrianDragan]

Hello. I didn't have to bleed the system. After I pressed the pedal about 20-30 times everything worked fine, and now it works without problems.

[@minkeuk549]

Hi! Do you still have your t8 car and can make a tutorial on clutch change? Thanks!

[@AdrianDragan]

Welcome. I still have the old Peugeot 308. It is impossible for me to change the clutch at home, and I really have a problem with the clutch and in the next months I will change it but I will go to a service for this operation. Maybe I'll make a video summary of the change process when I'm at the service.

[@minkeuk549]

@@AdrianDragan Why is it impossible?

[@Mister_kipling]

Hi, any chance you know what could be the issue with the engine in my video ? Thanks in advance.

[@AdrianDragan]

Hello. If you are talking about this video: kzbin.infoLXg5m8FX9X4?si=ucrMlHGNj6gDcv4Y the problem probably comes from the crankshaft pulley or the alternator pulley. However, every element on which the transmission belt goes must be checked.

[@Mister_kipling]

@@AdrianDragan yes, that's what I thought too. Thank you very much mate 👌

[@aramaz9886]

good job !

[@AdrianDragan]

Thank you! Cheers!

[@madridyten807]

hi..i have this error ..cant know the issue ... airbags) or pretensioner seat belts) faulty peugeot 308..could you help me please?

[@AdrianDragan]

Welcome. It is possible that the airbag plugs from the seats have problems. There are plugs under the seats. Before removing them, you must disconnect the car battery for 15 minutes, disconnect the plugs and spray the electrical contacts cleaner, let them dry, connect the plugs and then reconnect the car battery. If it doesn't work, I recommend you go to the service.

[@luidzi1]

@@AdrianDragan hi both, I had the same problem too with those connectors under both seats. In service they tried to fix it several times, but each time came back. Eventually, they soldered wires under seats directly, bypassing those connectors completely and that fixed the issue. It took them about 4 visits :D Good luck.

[@ioangavrilescu4506]

Cand am cumparat masina (92000) aceiasi problema am avut-o si eu, am schimbat prima data clema nici n-am ajuns acasa cu masina ca a inceput sa curga pompa si am fost nevoit s-o schimb, dar din pacate totul la service

[@AdrianDragan]

Salut. Se pare ca si atunci cand este doar uzura in clema, acea uzura se manifesta si in tija ce se fixeaza in clema, de aici se paote deduca ca ar fi mai bine sa se inlocuiasca si pompa.