Peugeot 5008 - How to change the running light

[@stephanvanbeelen7570]

Clock wise from above, you just saved me 200 euros! Much appreciated!

[@januszszyndler4311]

Perfect job! Thanks a lot. It took me 2 minutes to exchange. I advise to use a 6cm wood screw instead of tongs to remove the bulb :) It's even faster. What I like the most is that you showed what to do when a light bulb falls behind the fender. Really respect!

[@bodeksrc8007]

Great vid👍👍 Did first one in 30 seconds, it pops out after I turned my torx. It was bit mor work with the other one tho. Around 10 minutes trying to pul it out with pliers but did it eventually👍 Looks way better with leds👍 Thanks again for this video👍👍

[@beenthereknowit1654]

Nice instructions, thank you! For putting the bulb back in, I just used a bit of duct tape so that the bulb won’t fall off the tool when angling it back in.

[@nico8644]

Thanks, I was trying to pull It out for several hours, util I saw your video.

[@jimrothwell5388]

Many many thanks for the advice it took less than a minute to get the holder out invaluable in terms of stress relief.

[@JohnnyParker17]

Great help many thanks. Bit at the end about pulling away the wheel arch cover to retrieve dropped bulb was invaluable. Guess who dropped the bulb! Paid £31 for new bulb plus holder with Eurocarparts.

[@duinsel]

Job done, thanks for making the video. The original bulbs snap in place in the socket with a small ridge. Did anyone with replacement LEDs have them come loose without that ridge to hold them? They are only held by the power pins now...

[@lyle1980]

Great video thank you. You might also need to turn them off and on again on the menu on the car radio

[@dogspal]

Thanks for posting, Great video and clear instruction made this an easy job, all done used LED replacement what a difference 👏

[@tmnpthemondaynightproject2476]

The correct method is undo bolt inside wheel arch liner, remove torx screws under bumper and literally pull the wing away. It's not difficult exactly but hassle beyond belief for something that should be simple. A design specifically to make you go to dealer, £109 in the UK plus the very expensive bulb and holder. The method in the video is possible with patience and small hands. Indicator just as fiddly.

[@rupestrevideo]

Great. Very well explained.

[@anthonyellis1409]

Do you have any tips please

[@MartynHood]

Worst positioning of a bulb ever. Got mine on order ready to do this next weekend.

[@eugenebarnes6378]

ha you should try changing bulb on renault grand scenic. you nearly have to remove the engine. nightmare

[@bradauto]

What he said - but be aware it’s a t45 not a t40 🤟🏻

[@bodeksrc8007]

Its t 40. NOT t45!

[@costasgheraniou311]

I really wonder what was on the mind of the people that designed this. And more than that why a lamp with a plastic base costs 25 euros. I replaced them with leds but after about a year they stopped working. Replacing them is only frustration

[@vaperschorsch8803]

Kalispera😉. In Austria i payed 54€ for the lamp!!🙄

[@anthonyellis1409]

I'm having trouble with mine as I have put new builds in and thay still not working. And I don't no y tho

[@autoroadsales9775]

Mine have not been working, I changed the light bulbs still not working, I have checked all the fuses too, anyone have an idea why? is their a certain way to turn them on?

[@slavyanbg]

You have to turn on daytime lights frim the menu ;)

[@Goatsmilkuk]

Does the led light give any error codes?

[@andrewliles8948]

No, it just stopped working

[@sportingforever1624]

Thanks very much good help stead para someone

[@tooplanx]

Thanks for the video. How on earth are you meant to replace a bulb in the roadside?? Utter joke.

[@namtfelable]

Thanks!!! Great video/advice!!!

[@rolandbeaudequin2930]

Tu la u ou la Led ??

[@stephenm28]

where did you get these bulbs mate?

[@andrewliles8948]

Ebay. Most recently I bought these: www.ebay.co.uk/itm/2x-LED-Car-HP24W-7-5W-COB-Daytime-Running-Lights-Bulb-DRL-Error-Free-For-Citroen/292191841649

[@manuelalamo8003]

Thanks a lot very usefull

[@nandodapalma]

Many thanks!!!!

[@martinbyrne3170]

Be helpfull if there was some sound

[@андрейрыбачук-н8к]

класс !!!

[@andrewliles8948]

voir aussi kzbin.info/www/bejne/habPmXl9Ysqijqs en français