PFMEA | Part - 4 | How to fill PFMEA format | in Tamil | ௭ளிய தமிழில் விளக்கம்

[@newmechanicalmind8818]

Let's improve our knowledge in Industry Subscribe here : kzbin.info/door/bsoHyXxtAelbMYicLaHQGQ

[@jacobragland8235]

Very nicely done! thank you for the time and thought you have put into this training.

[@newmechanicalmind8818]

My pleasure!

[@naguleshjesi3178]

Wonderful training program.. Which is very useful for us...Your traning ppt is Can easily understandable for anyone

[@newmechanicalmind8818]

Thank you Nagulesh. Keep watching and sharing our videos

[@hasanezhil5654]

Really very very useful video Thanks to video

[@newmechanicalmind8818]

Thank you Hasan Ezhil. Keep watching and sharing our videos to your friends

[@Phenomenal3895]

I am in fourth year mechanical engineering. Could u pls tell me which software we should download and work on

[@newmechanicalmind8818]

Hi Gautham, kindly check with your college friends for better suggestion.

[@arivanandhana583]

Super sir, clearly explained

[@newmechanicalmind8818]

Thank you friend. Keep watching and sharing to your other friends.

[@nithyakumarsivaprakasam8468]

Thanks for your video, it is my scenario, out customer specified 25 dimensions as critical, whether we should add all those dimensions in PFMEA

[@newmechanicalmind8818]

Hi Nithyakumar, if one dimension is contributing for fitment or function, that dimension's failure modes (over size & under size), effect of that failure mode, cause, current controls and further actions (if required) to prevent that cause and to detect that failure mode are definitely to be added in pfmea.

[@duraisingam8024]

Thank you so much sir🙏

[@newmechanicalmind8818]

Thank you. Keep watching

[@patelchirag3158]

Sir, Request you to please make it in english so it will easy for all of us.

[@newmechanicalmind8818]

Hi Mr.Patel, i am making videos as part time only. It is difficult currently. But i will try in future

[@karthikeyankrishnasamy6661]

Very good explanation

[@newmechanicalmind8818]

Thanks and welcome

[@marudhupandi7689]

if turning opertion time RM condition harness high means part broken possible sir od oversize not possible

[@newmechanicalmind8818]

Hi Marudhupandi, i have experience in turning. Rod hardness will vary batch to batch in Raw material. If it is more the turning tool will get blend soon and the OD will increase if the operator not noticed the tool condition.

[@marudhupandi7689]

@@newmechanicalmind8818 i got sir thanks for your feed back

[@thirugnanamt4818]

How to create FMEA full document sample videos update

[@newmechanicalmind8818]

Pls check at your company for FMEA model and verify based on our fmea training

[@qmsconceptstamil]

Nice sir

[@newmechanicalmind8818]

Thank you

[@seenuvasan8018]

Thanks for your support

[@newmechanicalmind8818]

Hi Seenuvasan, thanks for your support. Keep watching and sharing our videos

[@sivaraman2294]

for example a defect is failed to found in inspection stage but it would be found out in the testing area due to missed inspection (eg-mobile assembly) so severity will be high with respect to that stage and the detection will be also very high at that stage so it means RPN increases . how to solve these?

[@newmechanicalmind8818]

Hi Siva, Severity (S) will not change at any cost and will be decided based on effect (see severity table for rating). Ex. If a brake wire assy fails in 2 wheeler it will lead to accident and severity will be 9 or 10 such cases. Even though you are increasing your inspection to robotic sensors for ensuring the assembly of brake wire parts, the severity (accident due to failure in brake wire fails) will not change. But your detection rating (D)will be reduced may be from 6 to 2 or 1 (due to robotic sensor / inspection). And occurrence rating (O) may be reduced by proper prevention controls in assy process and may be reduced from 6 to 4. So, RPN is the multiplication of S X O X D and may get less RPN due to reduction in O or D only. Hence, at any cost severity should not be reduced and remains same. But the selection of severity rating based on products end application is important. Hope you have understood.

[@sivaraman2294]

@@newmechanicalmind8818thank you for the response sir!! so detection score can also be given based on the forth coming detection stages or tester post assembly?

[@newmechanicalmind8818]

Hi Siva, detection rating should be given after considering all inspections (manual / automatic) till sending to customer.

[@sivaraman2294]

@@newmechanicalmind8818 thank you sir!!

[@sankarganesh6691]

Fmea version 5 formet iruka

[@newmechanicalmind8818]

I have no format and will try in future.

[@TMBTamilBoss]

Bro can I get this ppt ?

[@newmechanicalmind8818]

Hi friend, pls create your own by copying this video for better understanding