Φ12mm Automatic D type buckle forming machine

contact:[e-mail], [e-mail]
Reppart Group is a machinery supplier from China.
We supply various machinery for industrial production,including complete plant equipment,such as full set of machines for fan guard making,refrigeration compressor making,condenser/evaporator production,metal cabinet making,Aluminium profile extrusion,electric wire/cable production,plastic products production,etc.We are able to provide complete technology solution. We also supply marine products with CCS/LR/DNV/ABS certificate,such as shaft,propeller, rudder,rudder stock.alibba ID:reppart1.Just tell us what product you want to make, and quantity,size, raw material,and standard if you know.

[@DonTruman]

Question from a non-engineer, but I know enough to ask the question: how do you know when to replace the dies? I.e., I presume they wear out, and as they do, eventually they don't form the part as well as they did when new. And I suspect there is motivation on the part of the owner to push it as long as possible, to save on the cost of buying new dies.

[@kingswardyu9914]

Thank you for paying attention on our machine. You are right, every user want to save the cost. But please don't worry about it. If the wire strength is not very high, it usually does not cause wear too much on the stamping die Since the die is made of mold steel. Or perhaps the precision requirements of the product are very high, with a tolerance range of less than 0.001mm or even smaller. Generally, this types of product do not have such high tolerance requirements. What needs to be considered is the change in product shape or size, which requires the replacement of the mold. Another consideration is the wire feeding roller. The wire feeding roller uses friction to overcome the wire feeding resistance. If there is wear on the wire press groov of the feeding roller, it is easy to solve. Use polishing or turning methods to reduce the diameter of the wire feeding roller by a few millimeters. Wear usually occurs if the steel wire coil weight is very heavy. For example, over 300 kilograms. If the steel wire coil is much heavy, it is recommended to equip an electrically driven constant tension synchronous unwinding machine, instead of a regular non-powered wire paying-off stand. In fact, we have been selling this type of machine worldwide for over 20 years, and no customer has ever reported this problem. still thank you just the same.

[@DonTruman]

@@kingswardyu9914 thank you much, appreciate it.

[@lakhanpalsingh5500]

What cost of this machine

[@aizabaizakhursheed8862]

Whats is the price of this machine

[@shahzadalam7761]

Where from your office?

[@kingswardyu9914]

Rm. 101, No. 19, Sicheng Road, Tianhe District, Guangzhou.China

[@shahzadalam7761]

What is price this machine in dollars?

[@kingswardyu9914]

@@shahzadalam7761 Dear Sir, This is a heavy duty machine. Do you realy need such heavy duty machine? Please contact us at: [e-mail] and leave your contact detail. Thanks Kingsward

[@spm2508]

Nice machine... What will be the cost?

[@kingswardyu9914]

Dear Sir, This is a heavy duty machine. Do you realy need such heavy duty machine? Please contact us at: [e-mail] and leave your contact detail. Thanks Kingsward

[@ziasaifee8434]

Wat rs

[@shahzadalam7761]

Hiiiii