Phantom 3 Firmware Reinstall

[@UrAvgRasian]

God bless your soul you fixed what could have cost me 1-2 weeks of DJI stupid repair service. Thank you for helpful video I'll make sure all my DJI buddies know this video if update ever fails.

[@Fc-tv]

Hello, thank you for the video, I made the last update. In fact, I don't use my drone much, and the update went badly. The drone kept ringing. I did a lot of research to find an explanation and it was thanks to your video that I was able to redo the update, thank you very much for your help. Good day

[@federicoferro6941]

Thank you so much. I've watched near a hundred videos and I couldn't solve it!

[@tnhwyman]

Andy thanks for the visual demo. This is very helpful.

[@isaiahkazarovich]

Hey @A Hughes , thanks for your well constructed tutorial. I followed these steps and at the end of the update, I received a solid red light instead of the green light. According to the “install log” the update has failed. Any indication of why this could be?

[@planesstevee]

Thanks man!!! your awesome. Ive been bashing my head against the wall all day trying to sort it

[@tgalla01]

I ran into a problem I believe was caused by a old/bad SD card. I think the P3 tried to read the card on boot. Ever since that it says no signal/Flight error records. I've tried your reset and I'm not seeing any of the green/amber led on the gimbal. My question is, if I get the audible two quick beep and no LED...does that mean anything? As in your experience. DJI support was not even close to helpful.

[@56klasse]

Thank you very much! This helped a lot and fixed my bug

[@kbssaprodussoes]

does we need a sd carn on it while doing this? with the firmware we want? can we do it without? does it need to be empty?

[@ethanfloro7933]

Hi, i did exactly this (about 6 times) and my drone's updates always seem to fail

[@emilekv777]

It seems that smebody else have same problem that i have. Did you solve it and if do, how?

[@olympiuss]

Emil Väisänen I can’t solve it still to this day did you ever solve it.

[@sebbarquin8006]

I'm trying to put P3X_FW_V01.11.0020.bin on but 3/4 through it goes red and txt files says corrupted. I give up ! I'll sell it for scrap on ebay

[@richieora57]

how to cancel the installtion mode.I did this one time.now it always boot like this. without sd card ,it will stop at the single beep.

[@jkohutiak]

mine doesn't even have that button.

[@heznadastudios]

Does it applies to phantom 3 standard cos am having issues with the sound that wont seen to go away

[@dnacho7]

How to do it on a phantom 3 standard?

[@Flycamguide]

hi . i have a phantom 3 4k . yesterday , i was updating the new version of DJI GO and then i didn't totally install ( upgrade) for phantom drone and its controller because i powered off drone after that,. but then, i turned on. nothing requires me to do sth. . so , can you help me out to solve this issue?

[@sethkurtz4187]

Hey, I'm encountering the same exact issue right now. Did you ever figure out what to do? Thank you so much in advance! Help would be greatly appreciated!

[@UpperToys]

Thanks, Andy Hughes

[@thefourpals]

Does my remote need to be on?

[@syxxwilliams]

it didnt work 4 me edither when its done it starts off green then turn red can someone help me plz

[@landryradoniainaraobelinas8887]

is it possible downgrade from 1.11 to 1.8?

[@faumemedia]

Did you manage to downgrade

[@eopedroza]

How hard reset phantom 3 standard controller

[@carlosfortis6109]

Y en el standard?

[@guerinomaione6410]

Hallo, si it possibile downgrade from 1.6 to 1.4?

[@suekiestrickroper5269]

guerino maione ‘

[@Vigilantes68]

Do you have to leave the same firmware on the SD card?

[@sploodge]

+Vigilantes68 Obly if the firmware contains a battery update and you have more than one battery ( just put the other battery in and power on, it will get updated ). After that, NO, there is no need to leave the firmware on the SD..

[@Vigilantes68]

+Andy Hughes Cool!, just got a spare 4K camera and needed to be updated to what my firmware is on the aircraft. Thank you for showing this.

[@PeakResetProductions]

Hi AHughes, you are my last hope. I have a P3P. And the camera is acting weird. when i turn on the P3P and then record a video the images are blurry. But after i reset the camerasettings the images are fine. Once i turn the bird off and then on again the problem starts all over. Blurry images until i reset the camerasettings. Do you have any idea why that is?? cheers, Mark

[@alejandroalvarez3894]

Thank you thank you!!!!! This helped a lot

[@antonioalbertoonline]

I did the same as the video and it does not work. The back LEDs are flashing green The led forward is always red.

[@darklanc4702]

Same

[@seriousbusiness6240]

Thanx alot...

[@genbeau]

FRackking DJI.... I'm ready to smash mine... good info

[@Jenechka25]

A

[@v-wara6087]

Good😀😀😀

[@diegoramon2000]

Do you have to leave the same firmware on the sd card?