m on a mission to sent hate message to all the DJI product. Reason their after service sucks... they are just good at selling product and that's it.. just bought a DJI Phantom 4 pro plus with a defective gimbal. and they won't change it under the warranty. instead I have pay extra to get it fixed. if DJI company reads this message, let me tell you your service sucks..and m gonna discourage innocent customers who are going to buy your product. people if you don't wanna go through what I been through..don't buy DJI products.. go for other products that have good after service. where you can easily buy parts from anywhere in the world. the rest is your discretion.
@FlightSim27034 жыл бұрын
And they sent out bad firmware to damage our drones, to get more money out of us !!
@FrederickDunn Жыл бұрын
I have a P3 Pro that is now just a fancy brick. Everything starts up, the remote connects to the quad, and everything comes on, BUT, no signal from the camera, so it's no longer useful. is there a repair company in the United States that you would recommend? Thank you.
@adamjhuber8 ай бұрын
Did you find a repair company in the USA for the Phantom 3 Professional?
@AlbertOkala-zd1sv5 ай бұрын
And me too, what can i do? Please
@brianallison9642 Жыл бұрын
Never will buy another DJI product.
@orangebudha4 жыл бұрын
Basically it’s a fail update and it can be done by following a tutorial on how to reinstall it with a usbserial adapter and soldering some wires into the board.. there’s a video but it’s in German language.. I did it by following the video without the audio
@FlightSim27034 жыл бұрын
Please provide the video to us, if it's in German language don't worry, we can understand. Danke schön
@orangebudha4 жыл бұрын
Flat Lander yes I will be interested in doing it.. I’m in the USA
@orangebudha4 жыл бұрын
I’ll do it for free, I’m in Los Angeles California...
@joechambers093 жыл бұрын
@Flat Lander so you brought a used motherboard for the gimbal? And was it hard to put in and how much did it cost
@joechambers093 жыл бұрын
@Flat Lander ok thanks unfortunately I have the phantom 3 professional and I think they are sold out...when you put the board in did your camera have any issues calibrating
@IrfanBheenick6 жыл бұрын
So we have to replace that big main board of the gimbal?
@retiagu15854 жыл бұрын
he wants to sleep for a while。。 remove SD card,check and press the frequncy-key of the gimbal and then insert SD card。
@tokancavbocavtobokan77236 жыл бұрын
I want to know what to you can tell me on my Phantom 3Pro the video works but the camera Heat up and says it needs to be upgraded and it doesn’t move it. Straight down
@FlightSim27034 жыл бұрын
Don't update firmware, it will damage you drone! !
@nicadair77005 жыл бұрын
If you don't start the drone within a certain time period the Lightbridge module becomes corrupt and MUST be replaced. Make sure your drone is booted up at least once every 3 weeks. Phantom 3 Video Downlink Module V14 is the faulty part.
@FlightSim27034 жыл бұрын
No bro, the firmware damaged everyone's drone
@ciaobelloqir Жыл бұрын
Anche il mio dopo l'ultimo aggiornato si è bruciato non si vede niente te come hai fatto a rimediare sono in panico
@arnelvicta29657 жыл бұрын
WHERE WE COULD SEND THE PARTS
@alencarpacheco9057 жыл бұрын
Problem flat cable?
@androsm43 жыл бұрын
Dilo en español.
@Megaportaltv4 жыл бұрын
hello how are you? , I could tell if you managed to solve it and how you did it, I have the same problem with my phanton 3 advanced drone, and I even changed the flat cable, and it didn't, thank God bless
@AlbertOkala-zd1sv5 ай бұрын
Please help i have this problème, how to do?
@laflammedavid4 жыл бұрын
Okay... but what's the fix?!
@cre8tivity069 ай бұрын
Well that explains it! I haven’t flown my P3P since December 2021 and I cannot get a picture on my monitor for nothing.
@mckaax7 жыл бұрын
What needs to be done to fix the problem. Some need replaced?
@MAHESHSTUDIOCREATION3 жыл бұрын
Change flex cable
@believersfaithfamilyminist46942 жыл бұрын
It’s the flex cable,before you think the board guys
@marcinmilewski19786 жыл бұрын
I have the same problem after upgrade to Packet: P3X_FW_V01.03.0020.bin, SD card trick doesn't work
@dronedreamsperu29736 жыл бұрын
Marcin Milewski Sorry ti hear that. Many Phantom 3 Pro have that problem. When you update the firmware they loose video. Norhing you can do but replace de Gimbal board. But DJI doesnt sell the part by itself you will need to buy the whole camera.
@darekjaniec85126 жыл бұрын
Marcin czy udało Ci się uporać z brakiem wizji w inny sposób niż serwis? Z góry dziękuje za odpowiedź
@kylemiller5933 жыл бұрын
Are you still repairing these parts?? I need mine repaired. Thanks
@jonathanasquiosorio7343 жыл бұрын
tengo el mismo problema pero al tomar fotos o grabar si puedo verlos en la pc, es decir si me guarda en la memoria sd tendre dañada la placa?
@carlosantonioalfonzo18043 жыл бұрын
Tengo el mismo problema . Solucionaste ?
@Juanayyo2473 жыл бұрын
Mismo problema alguna idea? Que cagada
@jonathanasquiosorio7343 жыл бұрын
@@carlosantonioalfonzo1804 te cuento que no, la unica solución q daban era comprar todo el conjunto de la placa hasta la cámara y ahi posiblemente me volvía a dar señal, todo eso em salia como en 400 dlrs y mejor me compre uno nuevo XD
@jonathanasquiosorio7343 жыл бұрын
@@Juanayyo247 te cuento que no, la unica solución q daban era comprar todo el conjunto de la placa hasta la cámara y ahi posiblemente me volvía a dar señal, todo eso em salia como en 400 dlrs y mejor me compre uno nuevo XD que paso con tu dron? el mio lo estrelle y se dio con una cerca electrica jajaja
@Juanayyo2473 жыл бұрын
@@jonathanasquiosorio734 no me muero este es de mi novia lpm. Lo guardamos no lo usamos por un año y ayer lo prendí y me paso esta que ando todo perfecto pero no veo la cámara no más una amargura
@dronedreamsperu29737 жыл бұрын
Do not update the firmware on p3pro it burns the plate and no more signal.
@cristinelness666411 ай бұрын
How to contact you?
@adrianvarelablogs8633 жыл бұрын
En español plis
@JoeCar424 жыл бұрын
Where do you buy the replacement parts for Reapir???
@dronedreamsperu29737 жыл бұрын
Its hard to find the part cause dji doesnt sell it by itself. We needed to replace the card inside.
@FlightSim27034 жыл бұрын
Actually DJI provided bad firmware to damage cameras, I'm so disappointed with dji, they need provide us a fix !!
@FlightSim27034 жыл бұрын
@Flat Lander that was intentionally done by dji , I'm afraid to buy more dji because I can't trust them, I'm looking for different brand.
@zdrone46446 жыл бұрын
I have same problem, but if i make a Photo from remote command, after i see the photo on my pc (read sd card) so i think board camera it's ok, it's only a sw problem
@dronedreamsperu29736 жыл бұрын
ZDrone yes the camera is fine you can take pictures and video and it will record it in the sd card. But you wo t have visual on the phone or ipad.
@Swedencake5 жыл бұрын
Same for me! How to fix
@AliRadaydah4 жыл бұрын
did u fix it
@kelerencalada29976 жыл бұрын
cual es la solucion ?
@orangebudha4 жыл бұрын
Keler Encalada está es la Solución es muy simple.. si puedes seguir el Video nada más y listo kzbin.info/www/bejne/mKCuYo18rpWjntk
@lucaspajarocauzzi4 жыл бұрын
Y Pero como lo soluciono? Gracias
@dronedreamsperu29734 жыл бұрын
Cambiar la placa del cgu del gimbal
@lucaspajarocauzzi4 жыл бұрын
Drone Dreams Perú Vos sabes que acabo de desarmar el Gimbal porque este modelo no trae el botón de reset al costado y después de volver a ensamblarlo, lo enciendo y arranco! Me tiene desconcertado! Será alto suelto????
@lucaspajarocauzzi4 жыл бұрын
Drone Dreams Perú Y donde puedo comprar ese CGU? Acá en argentina no lo tienen. Gracias
@moctezumaleyenda54847 жыл бұрын
tienes un email?
@dronedreamsperu29736 жыл бұрын
ddpdrone@gmail.com
@rosmanzakaria54207 жыл бұрын
finally fix. 1st, switch ON RC. 2nd, remove droan SD card. 3rd, switch ON droan. you will see pic back at your hp screen. then insert back SD card to your droan. good luck
@dronedreamsperu29736 жыл бұрын
rosman zakaria thanks but the problem is not the sd card its the video main board card onside the gimbal on top of the camera.
@derekblack58976 жыл бұрын
so what do you do then?
@dronedreamsperu29736 жыл бұрын
Derek Black you need to change the board card on top of the gimbal.
@derekblack58976 жыл бұрын
Drone Dreams Perú is there a way I can do this myself? Or most likely to complicated and have to send in for repair?
@derekblack58976 жыл бұрын
Drone Dreams Perú could you possibly link time to a video and the cord? Thanks
@dronedreamsperu29736 жыл бұрын
Cambiar la plac gcu del gimbal
@privadoprivado25214 жыл бұрын
funcionó?
@orangebudha4 жыл бұрын
No se cambia.. solo se instala el firmware de la cámara que esta corrupto
@AliRadaydah4 жыл бұрын
what did u do to solve it
@carlosantonioalfonzo18043 жыл бұрын
@@orangebudha cómo va tengo ese problema como lo actuallizo? carlosantonioalfonzo@gmail.com. Por si me quiere dar una mano gracias
@orangebudha3 жыл бұрын
@@carlosantonioalfonzo1804 claro que si con gusto... te acabo de mandar un mensaje a tu email
@FlightSim27034 жыл бұрын
No video signal? Your drone is not broken, its fault of dji application !
@leonanim Жыл бұрын
How much is the cost of repair, and long does it take?
@bertline7 жыл бұрын
Where can you find this part?
@dronedreamsperu29737 жыл бұрын
Bert Kuysten the board oof gimbal
@randytrivette66185 жыл бұрын
@@dronedreamsperu2973 I'm pretty sure he means where can I find a new one. Not where is it located on the drone,, because I need one also, if you can tell us where to go and order 1
@Here2HelpU5 жыл бұрын
Hi some youtube videos are saying this is a firmware issue? Or is it not the same issue.
@orangebudha4 жыл бұрын
Jim here is your kzbin.info/www/bejne/mKCuYo18rpWjntk