#phantom

[@CarlosChebataroff]

Thanks! Works fine but everytime I turn off controller, it back to the older DJI GO older version. And the maps are blank again...Do you know why?

[@mrdrone1212]

I haven’t try it Long time. one of my customer had the problem. He never complained. Sir

[@groundbaseuk]

Thank You, I have followed your directions and all seemed OK. However the maps do not seem to download. Waited 15 minutes but the circle just keeps going round and round. After 15 minutes I went to themaps icon, top right of download page and this states no maps have downloaded. I have tried to press the download button but nothing happens, just the circle going round and round, Have you any thoughts??

[@mrdrone1212]

Try to find. Software on internet

[@北林拉图]

same here

[@matthewrulka559]

Hello thank you for all the help the app installed fine but its stuck on offline map download and will not install the maps.

[@mrdrone1212]

Try with the Dji assistant 2 software

[@Juniorbahia]

Me too

[@rrcreativestar2923]

tq sir great message and upload more videos

[@mrdrone1212]

Thank you, I will

[@hosseinfarajollahi97]

Hi Sir thanks for your fantastic video. Very informative. However I try to installgo 4 as you said but not installing. it says App not insttaled

[@mrdrone1212]

Did you try to update with Dji assistant 2

[@Juniorbahia]

For me Dji assistent 2 only show reset ALL system

[@JonasHolmqvistSweden]

Hi man, awesome video! Me personally have tried different instructions like this now the last 3 days and it just do not work. And for 4 days ago I got the drone back from DJI Service Repair. It seems to me that the remote just refuses to upload to this version. "Resourse data initializing" does not appear on my screen at the end there.. I do not know why.. Do you have any idea what this might be about? I am using a micro sd card and following DJI steps and yours.. I am LOST. Thank you so much for your time.

[@mrdrone1212]

Did you try to refresh the firmware on rc…? If not do it with the Dji assistant 2. And then do the My step again. I hope you will fix it.

[@1200sbeemer]

@@mrdrone1212How do I use DJI assistant 2? I don’t quite understand, do I do this using the controller? Do I need to upgrade and how? Thank you. I just received my phantom 4 pro plus back from DJI for a battery replacement, they upgraded the firmware for me but I haven’t any maps at all. Haven’t been able to fly it and it’s been a couple of years

[@Jason954x]

I found the fix. It seems as DJI switched from MapBox To OpensStreet. Took me hours to track down the updated file/fix.

[@GRUSpottingHD]

How can i fix it? Which is the right version of firmware and dji go?

[@Jason954x]

@@GRUSpottingHD Do you have the GL300E RC (Phantom 4 Pro+)?

[@GRUSpottingHD]

@@Jason954x yes

[@Jason954x]

@@GRUSpottingHD kzbin.info/www/bejne/qYHXapqGn9OIm5I

[@GRUSpottingHD]

@@Jason954xthe link is off. Could u repost and send it to me?

[@ZulkifliAbraham]

Hello, Im can,t linked my phantom 4 Pro Plus controller to phantom 4 pro, need help from you. thank you

[@mrdrone1212]

If it is not paired. Try to pair with an other drone. And update me with the status. I promise u I’ll try my best to give you a solution

[@mrdrone1212]

Try to update both devices firmwares. Rc and drone with Dji assistant 2 for phantom. Try this method it should work for you. Brother

[@anthonysmith5979]

will this work on the crystalsky?

[@mrdrone1212]

It should work. But not tested yet.

[@saifilms5897]

Sir message likh rha hai there was a problem parsing the packege

[@mrdrone1212]

if it is failed please try to refresh the firmware and try again

[@allinonetechnology818]

Thanks bro video good

[@mrdrone1212]

Welcome

[@PhannyObsession]

Still can't get mine to work. Even spoke to DJI 'Support' and they said I should send the Controller to them

[@mrdrone1212]

bro. have you tried firmware update. on RC

[@PhannyObsession]

@@mrdrone1212 - Yep, done that a few times. In fact every time I do that, it actually makes it worse. After I update/reinstall the firmware, the Map button doesn’t work at all. I just hear the ‘click’ when I tap on it. But, it does nothing. Then, when I reinstall the DJI App, the Map Button works again. But, there’s nothing there and it’s back to a blank map again 🤷🏾‍♂️

[@atoz_films]

Sir ab bhi sahi nahi hua phantom 4 advance plus me Kaise hoga

[@mrdrone1212]

I don’t understand what you said

[@atoz_films]

@@mrdrone1212 please help me

[@Droneman.Cornwall]

I haven't got explorer on mine I can't access the file on the usb?

[@mrdrone1212]

You can try this method- kzbin.info/www/bejne/en_NgaytZc-irJo

[@Droneman.Cornwall]

@@mrdrone1212 thanks that worked but the mapbox is still blank?

[@b.j.dejong4283]

Pitty it does not work for me, exact te same drone.

[@paolobaiada3541]

it doesn't work when i go to click on icon this is loading in loop

[@gayathriwathsala7506]

Nice work

[@hafiidhanandasaputra1263]

no workiing

[@HakamZadi-n6l]

Brother it's not working as you say

[@santiagopeterson338]

hi i tried it twice and it still doesn't show the map, it says resourse data initializing but when i open it the map is black

[@mrdrone1212]

What is the model of your RC please let me know

[@matthewrulka559]

Followed the steps and still not working

[@mrdrone1212]

It’s worked for me brother. Some people complaining it’s not. But other says it works. I have no idea. But anyway try to use Dji assistant 2. To reset the exciting firmware and try it again. If not working try searching any other solution. If you find one please share with other. And peace ✌️

[@matthewrulka559]

Thank you, how to reset the controller with assistant 2

[@amarstudioambedkarnagar]

Sir massage likh raha hai there was a problem prasing the package

[@mrdrone1212]

Did you tried it with Dji assistant 2….?