(unofficial) video commentary : Lyophilization is a process containing two phases : freezing and deshydratation. Freezing is important because it define the quantity of water that will be taken out of the product. Deshydratation comprehend two phases : sublimation (from liquid to gaz phase directly, with an enthalpic variation of both fusion(333) and evaporation(2501) so 2834 kj/kg) and then desorption (removal of solvent molecule from a substance i.e. drying) 0:23 Load : the pressure is atmospherical and temperature ambiant (the door has been opened to load in the first chamber) The second chamber, containing the ice trap, is closed. 0:30 Freezing : T goes to -50, -60°C in order to turn into ice the water of the product. 0:44 Primary drying : the water easiest to reach is sublimated. To do that, the pressure reduce to around 1mbar and the temperature rise to 5°C (from conduction thanks to the support and from radiation thanks to the metal tubes), to ensure that the water is below the triple mixt point (see phases diagram of water) and that the ice is turned directly into vapour. The ice-trap chamber is opened and the air flow make sure that the vapour go towards the cold tubes, which accumulate ice. Note that the water is taken out of the product at 5°C so the product is suitable for thermolabile compounds (sensitive to T like vitamins) 1:23 Secondary drying : If you follow the phases diagram, the idea here is to go lower in P and higher in T to convert as much water as possible in the vapour state. This secondary cycle has 0.01mbar and 20°C for exemple and is used to take out a supplementary amount of water that is harder to get (deeper in the matrix of the product) nb : another drying cycle may be conducted to minimise the quantity of water content in the product and ensure that it will not have any microbial or chemical activity 1:55 At equilibrium, the ice-trap chamber is closed, the pressure return to normal (otherwise you cannot seal the vials and they would be very hard to open) and the vial are sealed. 2:02 Between each cycle the ice-trap is emptied to maximize its efficiency. It takes a few hours to melt the ice back naturally or the process can be faster with the injection of hot steam. I imagine hydrogen peroxyde is used to sterilize the chamber
@kef1kef2kef3kef4kef52 жыл бұрын
thank you for this. i hope it gets pinned.
@tomzeru2 жыл бұрын
@@kef1kef2kef3kef4kef5 lol i have to study this again, feels good to find this back
@ayamh3265 Жыл бұрын
thanks
@mickstuart702510 жыл бұрын
Some commentary would be great, having spent all that money on the animation
@moorthyram564 жыл бұрын
one of the best freeze dryer for in my experience for commercial business
@bhavinparmar58652 жыл бұрын
Right sir o also working working gea GMBH lyophilizer
@khalil_Marouf9 ай бұрын
What is the name of this machine and how much it cost?
@devarshpatel64388 жыл бұрын
nicely brief about Lyophilization cycle
@Slblandon9 жыл бұрын
Great video, but some comments could be added in order to a better understanding of the process. Thanks.
@Suljaaa4 жыл бұрын
If you don't have any knowledge at all you don't understand this!
@laliceng57437 жыл бұрын
where can I get the explanation of this video with sound?
@joseadolfoariasbecerro22665 жыл бұрын
there is no sound on the video but for help you can visit www.lyophilizationworld.com
@tomzeru2 жыл бұрын
i wrote explanation if u want
@mahanasir88344 жыл бұрын
Excellent Animation. Self explainatory
@abukumar31756 жыл бұрын
Plz provide me operation and troubleshooting of depyrogenation tunnel ( like this animation )
@devkumarsingh25874 жыл бұрын
I think GEA should add some comments for better understanding.
@AngelLopez-fm1ec8 жыл бұрын
excellent
@nhungnhu16178 жыл бұрын
i don't understand one point. in 40-42s, water is supply into consider? what for?
@virtual_travler3 жыл бұрын
for heating the condenser to remove the ice on it.
@rkkhatri58043 жыл бұрын
What is the full form of gea ?
@prasadkharat60012 жыл бұрын
Good sir please sounds
@niranjanpradhan12526 жыл бұрын
nice
@ShaukatTravadi11 жыл бұрын
good
@HenrikasStatusas10 жыл бұрын
If you use heating it's not real lyophilization?
@NoahCue10 жыл бұрын
I presume this not to be true as it is not directly heated but the latent, solvent-specific heat is added in order to lyophilise the vials content. The last steps are only made in order to sterilise the machine as this is a pharmaceutical device. Interesting is, that this device appears incapable of sterilising the device concerning specific bacteria as for instance those which trigger the new creutzfeldt-jacobs desease. The temperature of 126 degree celsius is too low to destroy aforesaid bacteria
@Marco-it2mr9 жыл бұрын
NoahCue Creutzfeldt-Jacobs disease is not caused by bacteria, but by so-called prions, which are proteins. Those are unlikely to be present in just about any and all pharmaceuticals that are freeze-dried. If they may be present, they should be removed through other means prior to the lyophilization step.
@AngelLopez-fm1ec8 жыл бұрын
that program is that with which showed that process??