Phenex Narrative Ver. MG 1/100 | Asmr Unboxing | Stop Motion Build | Daban 6642S

[@tranminh8819]

Waiting for this kit for a very long timeeee. So "SATISFYING" well made video as usual. KEEP GOING ! 😍

[@DOMAKI_official]

Thank you so much 😁

[@kazuki7579]

amazing video and editing skill from domaki and i miss the old intro music. that intro music really hype.

[@ridvirgo1994]

The quality keeps getting better!

[@carlchen4588]

in your opinion, how was the building experience? was it a straight build or did you have to some modifications?

[@DOMAKI_official]

yes it was a straight build

[@fadhlanradhytia8981]

next build - mg deathscythe hell supernova - mg force implus

[@vinsunleaded900]

How are the nubmarks?

[@Dinobot-k2x]

Hope we get an answer to this

[@Dinobot-k2x]

Found down in the comments the nubs are really bad. Not sure if you care after all this time but thought id let you know

[@randompersonpassedby5126]

​@@Dinobot-k2x with crom-coating kits like these,your best way to handle nub marks is just use a godhand nipper and cut it very close to the runner. That's it,any sanding will leave a small black marks on the part because the crom painting wear off

[@edox1277]

next build astray red frame powered arms hirm

[@DFH4071]

Does the part easy to lose when you transform it to destroy mode/exposed inner frame?

[@QuangNguyen-nc1oy]

It's very nice

[@DOMAKI_official]

Thanks a lot 😊

[@Xaia_V]

how's the transformation, any parts falling off just like other mg unicorns?

[@DOMAKI_official]

The shield on the back is mostly, and the rest are fine.

[@MacHineJXD]

Can you use the extra parts, also the camera sensors declas how are they sticking strength?

[@quochuy6862]

Màu vàng mạ trong video là màu thực tế mà mắt có thể nhìn thấy đúng không bạn?

[@DOMAKI_official]

yes, straight from the box 🙂

[@dodoparker5256]

How did you make the head move around like that in destroy mode?

[@DOMAKI_official]

The head has a limited amount of articulation, what i did is tilt the head and then rotate it.

[@dodoparker5256]

@DOMAKI_official ok bro, i'll do that later

[@FreedowA]

another great video bro🤩🤩🤩🤩 keep it up🥰🥰🥰😍😍😍🤩🤩🤩

[@DOMAKI_official]

Thank you so much 😁

[@ddelvo]

Yo, what is the action base called for the tails?

[@miguelmarquez2852]

Mine came with led but have no idea how to install it. It look like a one whole metal wire with lots of leds attached to a single board. It has 3 modes, blinking, breathing and steady lights. Can you please help me how? Thank you

[@DOMAKI_official]

@@miguelmarquez2852 Im Curious because This MG Line up doesn’t include led’s with wires on it, Unless it’s a MGEX or PG scale.

[@miguelmarquez2852]

@DOMAKI_official yeah mine came with it. I'm looking forward for help even from the seller

[@blazetrinity9462]

Wow this looks really amazing ! What is that transparent base you are using ? Is that the standard figma stand ?

[@DOMAKI_official]

Yes, it's for HG kits, and I got it for free with previous pre-order kits.

[@May-ji8ei]

I like ur video 👍👍👍

[@DOMAKI_official]

Thank you 😊

[@eprohoda]

Yo,Domaki.Yeah, great editing,🤩

[@frostyyss8351]

Na miss kita boss!!! Even though it's only been 2 weeks since yung last upload. Hahahahaha

[@0Heeroyuy01]

i built a similar phenex(mg rx-0 unicorn gundam phenex full psycho frame prototype mobile suit "gold coat") first Unicorn gundam and last i will never build another one, the gold coat is not the reason why ether the kit is trash. if you touch it or slightly bump it it falls in half at the waist (super glued mine together) the left hand no matter which hand i try will not stay in and it was missing the little funnel things at the end of the backpack shields. this is an official Bandia kit from the same place i order all my kits from when i buy one, they gave me a partial refund b/c of the missing parts. and i hate how fragile the entire kit feels

[@wang_3375]

Without 2 pairs of tail stabilizer? Bandai product?

[@TypeFHobby]

Reactive ba sa uv light yung psycho frame?

[@sheilia7164]

Hello there! I was wondering if you could help me. I have a Phenex kit as well and I've been using medical gloves. Sadly they leave finger prints. May I ask what kind of gloves you are using? They do not seem to leave finger prints or smudges.

[@DOMAKI_official]

Hello, medical gloves are also useful. I didn't realize they left a fingerprint, but I'm using cotton gloves. which I've seen used in jewelry stores.

[@sheilia7164]

@@DOMAKI_official Thank you very much for your help! And it might be the brand of medical gloves I'm using, I'm not sure. I greatly appreciate you for helping and taking time to reply!

[@isopod5215]

Is the transformation from unicorn to destroy mode solid or is it unstable?

[@DOMAKI_official]

the main gundam is solid but the shield is a bit unstable

[@isopod5215]

​@@DOMAKI_officialgood enough for me, I'm gonna get this beast. Any tips?

[@wang_3375]

​@@isopod5215go look for the other review of daban mg phenex narrative ver 6642s, for me, I do not recommend this because the gold coating is not so stable, some parts are loose and other issues that I don't know about this model

[@Amyne204]

😊😊

[@valtronite]

Does it come with the led? The Pg daban phenex one

[@DOMAKI_official]

No, led for this kit are sold separately.

[@villidanego3902]

How's the build?? any fitting issues?

[@DOMAKI_official]

Yes, it has some fitting issues, especially on the armor parts.

[@haisesasaki8473]

What is the grey sticker for

[@angelomangana6305]

Hi, do you have a manual for tail binders? My kit doesn't have any, btw nice build!

[@alexescobosa5029]

❤

[@exm-unt-aj7203]

Undergated parts??

[@yodutaa]

9:13 Where can I find this Clear color Action base? 🙏🏻

[@DOMAKI_official]

it's not included on the kit. it's a pre order bonus for me.

[@yeagerdagn1389]

So cool bro

[@tomsquinn6773]

gold colour the same of different with normal 6642?

[@DOMAKI_official]

No, the gold on this one is more shining, and the tales are included in the box, while the tails are not included on the regular 6642.

[@afiqlims6276]

where can i get that exact same stand? or did it comes with previous kit? thanks in advance

[@RockiiChan37]

How do you get the backpack to stay on it keeps falling off

[@Jeff-qr8eo]

noice

[@noan888]

nice build bro! how big is it on cm?

[@DOMAKI_official]

around 20-22cm thank you!

[@GXMODS]

Yow kuis lagyan mo ng grasa yung 360 spinner mo sa mga bulitas para di umalog

[@yodutaa]

Which action base of Unicorn phenex 🙏🏻 I can't attach the model to the action base. Help 😂

[@DOMAKI_official]

It should work if you use a base stand that supports mg kits.

[@andhikadwi9759]

Really so good... Is it come with stand base??

[@DOMAKI_official]

no base stand included.

[@threeelement1183]

It is Repaint?

[@DOMAKI_official]

No, i dont do paints right now. all of them are straight built only.

[@threeelement1183]

@@DOMAKI_officialI need link to buy this kit

[@TungNguyen-el8cv]

hi bro why when i put the mask in i can't close it

[@DOMAKI_official]

maybe there's still a nubs, try to check and clean it more.

[@alhaidiljamal8299]

Hi, how about the nubmark, is it everything undergate

[@DOMAKI_official]

No, not all are undergated, especially some of the gold and armor parts.