Philips - Deep Cleaning and Refurbishing a Philips/Saeco Fully Automatic Espresso Machine

This affordable coffee machine from the 3000 series from Philips impresses with its simple design and good functionality. After opening the housing, all components are easily accessible, making repairs child's play. If you are looking for a fully automatic coffee machine that is good and easy to maintain, you will not be disappointed with this model. I hope you enjoy watching!
ᐅ Trevi Spidem - Saeco Vienna: • Refurbishing a Dirty C...
ᐅ Jura ENA 5 Restoration: • Jura Restoration | Ref...
ᐅ Jura Impressa Repair: • Jura Impressa Repair a...
M Y T I P - B O X
_________________
www.buymeacoffee.com/myworks ☕
www.paypal.me/ytmyworks
Affiliate links:
Bezahlter Link:
U S E D P A R T S
_________________
OKS Multi Silikonfett/OKS silicone grease: amzn.to/3cX39eV
Menzerna Polish Set: amzn.to/2PDuE68
O-Ring Set: amzn.to/3ACXB58
T O O L S
_________________
Wera Tool-Check PLUS: amzn.to/3rWSyJ1
Proxxon 22295: amzn.to/32IeGyk
#PhilipsSaeco #Repair #Restoration

[@olifko]

I love to way you work, with all the space you need, nice tools, calm hands, everything clean 👌🏻

[@charlenemccullough2293]

I love that you can’t make a mistake on measuring or taste. It’s a perfect cup of coffee every time.

[@AxelRoosen]

This morning: no more "coffee" coming out of the machine, just some dirty water. After taking it apart, with the great explanation of this video, I managed to clean out the grinder properly, and now the coffee tastes like from a brandnew machine again! Thanks!

[@andrzejsosna.7343]

Od lat mam Saeco Minuto i sam czyszczę. Od czasu do czasu oglądam klipy. Dla przypomnienia. Ale takiego dokładnego klipu jeszcze nie widziałem. Pełny szacun. Bez zbędnych gadek. Powoli, perfekcyjnie. Coś niesamowitego.

[@henkzaanstad2256]

Greate ! THANK YOU !. We have PHILIPS 3200 Series 4 years , no problems, now Just cleaning and working perfect. Thanks. Greetings from the Netherlands

[@henriksundstrom9434]

Thank you! I was on the brink of buying a new machine, but now the old one is working again.

[@migueldebasel2405]

WOW! Hervorragendes Video mit präzisem Überblick über die Kniffe beim Zerlegen und Wiederzusammenbau der Maschinen dieser Serie. So klar und vollständig hatte ich das hier noch nicht gesehen. Tolle Kameraarbeit, Danke!

[@christiaan5119]

Thanks for the great video! My machine currently outputs more steam through the side then through the steam pipe, so I"ll use this video to replace the seals. Hope that this will fix it!

[@torewensaas2956]

Thanks for another fantastic video. I really enjoy how you present this repair in a very relaxing way, no terrible music, no voice, no epileptic kamera movements, only pure useful information om how to do the job. You are the best 👍 I find it hard to clean the parts that are covered with coffee(oil) even with special cleaning powder/tablets for coffeemachines. What type of washing soda are you using? Is it regular sodium carbonate?

[@yt.myworks]

yes, that is regular sodium carbonate

[@herberar]

I am doing quite the same with a Saeco Lyrika but I don't disassemble the brew group completely. I' like to know how much can one charge for this kind of work. ( I used to fix washing machines thanks a lot,!!!!

[@ileanalenuta9855]

Mulțumesc frumos pentru ajutor ❤

[@Al-commentario]

Your video gave me the courage to do a big maintenance to my saeco device. Thank you so much.

[@rhd2qYT]

Does anyone know how to obtain a Phillips 1200 repair manual? Not a user manual, but a manual on completely taking the unit apart. This video did help, but my machine is a little different. Thanks!

[@jiapoboz]

best techno porno I've ever watched!! Great work. And very informative. Thanks

[@Jimzy93]

Loved every single second of this video, can't explain why or how.

[@ionutneamtu4450]

Thank you for your deep tutorial. This saved me!

[@BentRasmussen-pm6ct]

Hi 'myworks'. I love your video - very informative. My Philips Espresso Machine HD8821 stopped working a couple of days ago. I stopped right when it was done grinding the coffee but before making the brew. It is as if it is stuck somewhere? That means that I can open the gate on the right side of the coffee machine, but I am not able to pull out the grinder/brewer. Do you have a good advice?

[@yt.myworks]

In this video you can see how the problem can be solved: kzbin.info/www/bejne/lWfcYo2Yf7B3na8

[@bentrasmussen8403]

Thank you very much. Problem solved 😊

[@theodoroschatzis6101]

Thanks for this awesome video! My machine is stuck at the empty tray red symbol. I have it a thorough clean but no luck. Any advise? Where is the sensor located? Thanks in advance!

[@yt.myworks]

Hello, can you please describe the error in more detail?

[@itachiscroixx9101]

Thanks a lot! 🤗

[@crashingtiger]

Hi, Great Video! I have the exact same super automatic machine and it's been stuck in cleaning mode for months! Can you suggest any fix to get it out of cleaning mode? I have not had any luck finding a solution and I even called Saeco, but no solution. They just said it was an old machine and not worth fixing cause likely a main board issue. Every time I start the machine it stays in cleaning mode no matter how I power it down. Can you suggest any fix to get it out of cleaning mode? Family members had been using it while I was out of town and I have no idea what happened. Thanks!

[@yt.myworks]

Hello, I have been looking for a solution to the problem. Unfortunately, I didn't find anything on the internet :(

[@danlabbe5870]

Very good video thanks! I have a saeco incanta similar to this. The milk frother slowly lost its vigorous pulsation. Now it shows error code 14 and makes you wait a minute to reset the machine. It makes the coffee correct just no frothed milk.Any ideas?

[@yt.myworks]

Error code 14 means something is wrong with the temperature on the device. Unfortunately, I can't help as I haven't had a problem like this before.

[@Al-commentario]

Have you tried the service mode or test mode?

[@roxanasahnazarov9370]

Excellent work and great video. Thank you!

[@gabeanderson2813]

Great video. I currently have Philips Saeco 2220. After a while, no coffee is coming out. Just hot water. Tried some basic troubleshooting steps. What else can I do, man?

[@yt.myworks]

First try to revise the brew group.

[@rollerg300]

I have a Saeco picobaristo. The grinder motor is working but the grinder does not. Do you have a suggestion on how to fix the issue? Thank you

[@yt.myworks]

It could be that the grinders are blocked with a small stone. I recommend cleaning the grinders.

[@Magda-om9ls]

Hello, I have very similar express hd 8824/09 and after 8 years of using, when it is turned on, it stopped the first rinse process. I hear that pump is working but water is not pouring from coffe dispenser. And the coffe is being poured a little bit weaker than usual. We cleared all those pipes coming out from express, but still the same issue. Could you please give us a tip, what should be checked? Thanks in advance.

[@yt.myworks]

Hello, I recommend disassembling the brew group first, cleaning it and replacing the o-rings. Then you can clean the support valve (minute 5:25 and 13:15) and also replace the seals.

[@firasdhahir2640]

How to clean the brewing group? is it dishwasher safe if we remove the O-rings?

[@yt.myworks]

Yes it is possible but I recommend hand washing as the dishwasher can damage the plastic parts.

[@97iraM2010]

Hey, great video! I took everything apart and reassembled it. Once switched on it shows the flashing lights for the vending program, but after pressing go, only the alarm light flashes, brewing group is well placed. Do you have any idea?

[@yt.myworks]

Try switching on the machine without the brew group. Perhaps the drive is in the wrong position. Can the brew group be moved by hand?

[@97iraM2010]

@@yt.myworks thanks for answering .. just tried .. i can move the brew group while it is outside of the machine .. but the alarm is still blinking after putting it back in .. and it seems to be in the right position

[@yt.myworks]

Try switching on the coffee machine without the brew group. To do this you have to trick the micro switches inside the machine and then you might be able to see if the error message is still there.

[@basdevogel7508]

Wow, this is so satisfying 😊. Thanks

[@philippedestouches3180]

Hi, Nice step by step procedure. I took apart all pieces and feel ok to reverse action but where could I buy the different joints for the Philips Saeco HD8761 (except for the brewer as it is new) ?

[@yt.myworks]

I mostly buy from these two shops: www.juraprofi.de or www.komtra.de. Alternatively, you can also search for these parts on Ebay.

[@philippedestouches3180]

@@yt.myworks I did both but once I put my address in CH I cannot go further and finalize !

[@yt.myworks]

Try typing Juraprofi or Komtra into Google, you might find the stores through the search.

[@f.s.6862]

Hi @myworks, super Video! Ich habe bei unserer knapp 7 Jahre alten und gut gepflegten Maschine das Problem, dass aus dem Warmwasserhahn/Milchschaumdüse seit einiger Zeit immer noch Wasser nachläuft und den Kaffee verwässert. Auch geht durch den Milchschlauch nach dem Cappucinomachen noch Wasser wieder raus. Wenn man während eines der beiden Teile Wasser nachkaufen lässt, das Teil abzieht, dann sieht man, dass aus dem dünnen weißen "Strohhalm" auch Wasser läuft. Von dort eben in den Warmwasserhahn bzw. Milchschäumer. Hast du einen Tipp dafür? Viele Grüße und Danke! Flo

[@yt.myworks]

Hi Flo, auf Entfernung ist es in der Tat schwierig, eine genaue Diagnose zu stellen. Wenn du ein Philips-Modell ähnlich dem im Video hast, könnte das Magnetventil für das Öffnen und Schließen von Dampf und Warmwasser verantwortlich sein. Es ist möglich, dass dieses Ventil defekt oder verkalkt ist und nicht richtig schließt.

[@tonycee1144]

loved good job

[@user-xj9ex3ue8b]

아...아름다운 영상... 오직 수리하는 소리만 들리는데도 정말 아름다운 영상이다.

[@zaidmohammed75]

Merci beaucoup pour cette démonstration

[@Paul-tm7ny]

Excellent. Could you tell me what lube you are using please. Paul

[@yt.myworks]

To lubricate the seals I use a food grade silicone grease, it doesn't matter which brand.

[@ferrer985]

I have a 5000 series, nice to see that those different machines use the same core components. Good thing you warned about breaking the grinder disc. It's hard ceramic so I suppose it's brittle as well. What cleaning agent did you use for the brew assembly?

[@yt.myworks]

I used a simple washing soda from drugstore market but you can also use Cafiza, also works very well.

[@wimlannoo]

Bedankt voor deze video. Alles met succes uitgevoerd. Ik mis nu nog het schuimlaagje. Wat kan ik nog doen ?

[@yt.myworks]

Welke schuimlaag bedoel je? Kun je het in de video zien, min.?

[@tomjansen5052]

@@yt.myworks Crema bonen kunnen helpen!

[@williamwan2860]

Hello thanks for sharing, great works at all. My saeco coffee machine has a maintenace error code 5, the seller tell me that water pump can not get water from the water tank...any ideas how to deal with it? , Thx I did not use it for several weeks. I just take out the water tank and pour in fresh water , that it, but unfortunately i need to handle the maintenance matter. Thx

[@yt.myworks]

Hello, try to descale the machine thoroughly with a special descaler for fully automatic coffee machines, maybe it will help.

[@virb4014]

I had the same problem with my Philips ep4051. I was not using it for a fee weeks...And I descaled it 2times. The first time, it didn't work. So I let it rest all night long with a more strong product always for automatics coffee machine. The day after I descaled it again and now it works.

[@user-bh7bk2ok7d]

Hello, I have clean hot water leak from the brewing unit ( where the piston is) which o-ring can be the trouble maker? As far as I see there is only 2 o-rings on the brewing unit?

[@yt.myworks]

Hello, check the O-rings on the support valve on the machine.

[@Chin68O]

Hello ! Great works ! My philips hd8911 don t work. She say don t have water but the tank is full... Have an idea ?

[@yt.myworks]

Hello, does the water pump start when making coffee? If not then the water level sensor could be broken bit.ly/3EVZdda

[@Chin68O]

@@yt.myworks yes. The sensor it's broken. I have Cleaning with alcool and it s good but just 1 hour. I have buy a new sensor. Thank you !!

[@user-km8ub6eq3z]

I have a Synthia similar but when I do a descale the brew group does not go to work and leaks into the pan. when it then does a fresh water rinse it does push the brew group up into working and pushes the rinse water out the spouts. Is that normal or something not working right?

[@yt.myworks]

Sorry, I can't say that, I don't know this Saeco model :(

[@user-km8ub6eq3z]

same brewgroup design and very similar to this one. I have to believe that most of the descale logic would be the same. does this model start the descale with the brewgroup in work or home and pushes water into the drip tray? thanks

[@waytolong6360]

Hallo great video, i have a phillips 3100 Series 5 Years old, when i prees espresso it comes warm water from the warm water tank, what could be the problem? The ways where coffe comes out are clean, Machine do everything just form pumping water to grinding the coffe but i think the water dont come to grinded caffe ! Can you help thanks!

[@yt.myworks]

Hi, what happens to the ground coffee, does it stay dry?

[@waytolong6360]

yes ist stays dry, sometimes 1/4 of the coffe comes out the maschine, the ways are clean i suspect the 2 way magnet valve, beacuse the water always comes from the pipe where you foam up the milk@@yt.myworks

[@renaudc7203]

Very great video, Good job!!!! How often do you do this maintenance? Thanks

[@yt.myworks]

I think every three years depending on how intensively the machine was used.

[@mitsuracer87]

Mine just randomly started dumping the "rinsing" water into the drip tray instead of it coming out of the front spouts. It makes coffee just fine, the problem is just the rinsing process. Any idea as ro what could be going on?

[@yt.myworks]

I would start with the simplest, that is to overhaul the brew group first. If that doesn't help then the outlet supports.

[@Manjaro81]

very nice! Thx! ☕👍

[@aykutcavus7969]

Gute Arbeit! Was benutzt du für ein Poliermittel für den Wassertank?

[@yt.myworks]

ROTWEISS Acryl & Plexiglas Polierpaste: amzn.to/4ai3hBP

[@ahmetaltay5625]

A Perfect overhaul Thank you overhauling education

[@toddburgess572]

@MyWorks we must be brothers! 🤓I never knew there was anyone else as detail oriented as me! You do AMAZING work. Beautiful end result. 👍Do you sell refurbished machines? If so where through?

[@MarkusMattscheck]

Absolut amazing 👍

[@ian3422]

Hello, Thank you for the very detailed video, I've just cleaned my machine and have a rubber washer left over. I think it may be from when i took the panel off from behind the brew set. (about 8:46 on your video. I have a photo of it but am not able to attach it here. External Diameter is 35mm internal 20mm. I would be grateful for any sugestions where it may of come from. Regards and thank you in advance Ian C

[@yt.myworks]

Hello, you can send me a photo to: [e-mail]

[@andrejdragicevic5626]

HI, I have small problem, water is leaking under machine, you think somwhere is scale from water makin leak?

[@yt.myworks]

Hello, I recommend checking whether all the connections inside the machine are still tight.

[@cipritom]

I have the same problem. I tried to change the o-rings that can be seen when taking out the block for cleaning, but I can't find the same size. Where do you source yours? It seems that black or green ones are thinner than red ones

[@andrejdragicevic5626]

@@cipritom I cleaned this spring on 13:25, there was stone from water. NO more leaking

[@ianclark3940]

can you tell us more about the polishing system you used on the water tank and the fascia, as well as the polishing compound you used

[@yt.myworks]

Yes I will do that. I would like to make a separate video on the subject soon where all the components and tools I use can be seen.

[@ianclark3940]

@@yt.myworks That is really helpful, thank you

[@mrcomoglu]

hi there, my philips 4300 series machine in Americano option, gives espresso shot, but does not pour water after espresso. whaty should I check in the machine?

[@yt.myworks]

Unfortunately, I can't say that because I haven't repaired this model yet.

[@chrispengilly2983]

Sounds like the typical issue is o rings...just ordered some so fingers crossed !? I have 3200 and talking to Phillips that is the typically the problem. I can get espresso, hot water , coffee now and then but the americano will not work.

[@nikivan]

Thanks for the video. It wasn't quite clear how you removed the grinder adjustment knob. Just pull it up?

[@yt.myworks]

You need to remove the cover, no need to disassemble the adjustment knob.

[@panikpas]

Is there a way to adjust the grinder for finer grind?

[@mitsuracer87]

@@panikpas you push down and rotate the adjustment knob while it is grinding

[@panikpas]

@@mitsuracer87 , I mean, finer than by just setting it to 1. Internaly

[@repaircafeheldenmaaasbree]

Great video; very instructive!! I noticed the big collection of O-ring sizes you have (EPDM and VMQ types) and wondered how you determine what sizes you need? There are many coffeemachine brands/models out there and they all may use different O-ring sizes. What is the best way to come to a collection of sizes (like yours) that covers most machines?

[@yt.myworks]

@RC Peelenmaas there are basically three O-ring sizes (thicknesses) for DeLonghi 1.78 mm, for Jura 1.5 mm and Saeco/Philips 2 mm. Then I order the seals according to the diameter of the installed parts of the respective machine. The large amount of assortment comes about by itself ;-)

[@andrienis1]

@@yt.myworks could you please specify which exact o-rings were used for this particular mashine? I have a almost abandoned one,where most of the o-rings are either like plastic or shredded,thus precise measurement is not possible. Also it would be great to know proportions for washing fluid with citric acid

[@andrejdragicevic5626]

Hi, i did the cleaning. But now coffe is weak...i changed even grinding to smallest for stronger coffe but nothing like before. Any advise?

[@yt.myworks]

You'll need to adjust the grinder before reassembling the case. Otherwise, the finer adjustment is no longer possible.

[@jmulejable]

Hello, I have the same coffee machine and I have a problem when it starts to grind the coffee, it stops and all the lights start flashing. As expected, the coffee grinder is broken. Do you have any experience, it just needs to be cleaned or replaced? Thanks for the help

[@yt.myworks]

When do the lights come on? After grinding?

[@jmulejable]

The lights come on when it starts grinding.

[@yt.myworks]

Difficult to say, but I think the grinder is broken or blocked.

[@sergiocamposgarcia5465]

Hi@@yt.myworks. Nice video! I have a similar situation. When it is supposed to start grindind, it would not work and show error 1 (my machine is Saeco Minuto but inside it is exactly the same as this Philips). This started happening just after disassembling part of the machine to do a maintenance. I am sure the grinder is well connected, just as you video shows (positive, negative and the multiple wire connector). Do you know it there is some fuse or similar for the grinder? Thanks in advance.

[@Paul-tm7ny]

Where can i buy the grease you are using? Paul

[@yt.myworks]

You can use any food grade silicone grease. For example: OKS silicone grease amzn.to/3cX39eV

[@marcellomarrosu3924]

Ciao,ho una macchina identica a quella del video,dopo la macinatura quando il gruppo erogatore fa il movimento si sente un rumore di sfregamento,la macchina e ingrassata e anche il gruppo erogatore,una cosa che ho notato e che il perno che si incastra nel gruppo per farlo girare ha un po di gioco,sai darmi un consiglio x questo rumore fastidioso,grazie

[@yt.myworks]

Per favore mandami delle foto così posso capire di cosa si tratta: [e-mail]

[@alessio2778]

Hervorragende Arbeit! Ich habe die ersten Steps versucht. Beim Zusammenbauen lief es gut. Wenn ich aber einen Kaffee starte, dann springt das Mahlwerk nicht an; alle 4 rechte Leuchten blinken. Hätten Sie eine Idee? Anscheinend habe ich etwas gemacht, das dem Mahlwerk nicht gefallen hat… Vielen Dank!

[@yt.myworks]

Zuerst musst du sicherstellen, dass das Mahlwerk richtig angeschlossen ist. Als nächstes prüfe ob sich das Mahlwerk (mit kleinem Schraubenschlüssel von oben) leicht bewegen lässt. Wenn nicht, dann ist das Mahlgrad vermutlich auf zu fein eingestellt.

[@alessio2778]

@@yt.myworks Ursache gefunden! Es lag an dem Anschluss des Mahlwerks. Das zweite Problem lag an den Zahnrädern der Brühgruppe. Jetzt läuft alles. Vielen lieben Dank für die inspirierende Videos 😊

[@29moa]

Super merci beaucoup 😘😘😘😘😘

[@terneuv]

Impeccable 👍. Je prendrais bien un café ☕️ , aussi 😃

[@VedranTrajkov]

Perfect.

[@bigturk020]

Hi, I have a question..I have the same machine but lately when I forma cup of espresso the the machine grinds the beans and stops and the display says '(red light) no beans' and I lose a lot of precious beans, this repeats many times and after let say 10x I get 1 one cup of coffee, what can be the problem?, is there something with the grinder?. Bringing it to the repair shop isn't going to be successful because last time I brought it for a check up (because water comes out of the bottom) they couldn't fix it?, ..i mean if there is something with hoses you replace it?..and these guys are the official Philips repair shop, the problem still isn't fixed and water drips from underneath, I wanted to take the machine apart..but watching your video some knowledge is required 😅. Please help me out..please 🙏🏼

[@yt.myworks]

Hello, open the coffee powder chute and see if enough coffee powder comes out when grinding. It can sometimes happen that the grinder becomes clogged and no more coffee comes out. If necessary, you can use a vacuum cleaner to remove the old coffee. Also make sure that the grinding level is not set too finely.

[@crashingtiger]

I also read that too dark a bean can leave residue in the grinder that may be a culprit.

[@alexanderwelsch6056]

Очень полезное Видео!Очень помоглоюСпасибо

[@manfat7051]

Hi there, my Saeco machine works fine with the dry beans but fails to brew oily beans, after several years of use. When the Starbucks coffee beans are used, it just dumps the grinded bean and displays "no beans". However, when the machine was new, it could brew the oily beans. Please kindly tell me how to fix this problem. (i tried to clean the grinder several times and the problem still exists). Thanks.

[@moezmhamdi5219]

Did u already fix it ?? I have the same problem with my saeco lirika

[@manfat7051]

@@moezmhamdi5219 Sorry, No! The machine works fine with the dry coffee but not only a little bit oily coffee. I have tried to clean it many times but in vain. My last betis to replace the burrs (grinder knife), but they are not available right now. I can not think of anything else which could fix this problem. If anyone could shed some lights, i would most appreciate it.

[@moezmhamdi5219]

I tried today to dry the beans with tissue and it is working properly, i also tried to put the beans in the microwave but not working so for now i m using the tissue (paper) trick , then i will look for dry beans

[@manfat7051]

@@moezmhamdi5219 The dry beans work fine with your machine and my machine. The reason i want to fix it, to make it work with oily bean is in the hope of not limited with the dry beans only. I will replace the burrs. I will update you if the problem is fixed.

[@manfat7051]

I replaced the entire grinder assembly including the burrs, unfortunately, the problem is still there. The stupid machine still dumps the freshly grindered coffee grounds and complains "no beans".

[@rosenconkov6845]

good job

[@fabioalves-qf8ms]

Hi, good work! Thanks . How i can find the lubricant ? Thanks

[@yt.myworks]

amzn.to/3cX39eV amzn.to/44psKYN

[@fabioalves-qf8ms]

@@yt.myworksthanks my friend…. Just question, i have a small problem with my machine ( hd8841) . The coffee its running, but the water no… ever time when i power on the machine, the water not flowing or running, but the coffee yes…. Have you any idea? Thanks 🙏

[@yt.myworks]

Oh, sorry but I don't know. I once read that a worn-out water pump could be the cause of the problem.

[@Pnuttzz]

Wooahw, that's what i call "Refurbish"video with a good explanation... you have probably done it before, but as a very good overview... it is also so easy with the Philips 5000 series (EP5346/10) and how to open the water tank sensor... ..but I want to do it just like you or at least try.👌👍 Thanks

[@tibororosz5386]

You are a champion!

[@seppwe7639]

Unfortunately I don't remember where the big spring goes, can someone help me?

[@yt.myworks]

There are many springs in the machine, which one do you mean?

[@christiaan5119]

There's a big spring underneath the grinder

[@marcin4259]

Are you offering refresh services?

[@yt.myworks]

No, sorry but I don't offer any commercial services.

[@QueenOfArabianSea]

Finally I was able to open and clean my saeco. I just couldn't believe I was drinking all that shit inside. A simple flush button that flushes the system with hot water after brewing could have made a lot of difference

[@sogor123]

hello! thank you for this tutorial ! i do all you do and i still get all 4 red alert lights..... :(

[@yt.myworks]

Something is missing or installed incorrectly, check again. Start the machine without a brewing group, you may have to bridge a switch for this, maybe it's the brewing group?!

[@walmirism]

very nice

[@lifeisfuneh]

I'm blown away with the quality of your work! Did you consider making automatic water filling kit for these machines. I always wanted to do that, similar to ice maker on refrigerators. It would sell like hotcakes! :) Thank you for all the videos!

[@yt.myworks]

A good idea, I am sure that such systems already exist. For example, there are built-in coffee machines from Miele.

[@lifeisfuneh]

@@yt.myworks For sure, I'm just puzzled why Philips/Saeco/DeLonghi/Gaggia don't have that option available. All those built in Mile that have it are very pricy. 1/4 solenoid valve is $12 and adding second high level sensor can't be that expensive. They would be able to charge $150 easy for that option.

[@lifeisfuneh]

@@yt.myworks The Saeco Aulika has optional direct water connection . In the service manual the solenoid valve connects to pre wired harness on the control board. Any idea how is this controlled? Would you know where to find control signal that would reliably give indication when the valve should be opened and when closed? Thanks

[@janinh.931]

Hallo, danke für das tolle Video. Bei meiner Maschine blinkt das Wassersymbol und das Dreieck, also die obere und die untere rote LED. Es kommt kein Kaffee heraus, aus der Heißwasserdüse fördert sie allerdings noch Wasser. Ich bin verzweifelt, haben Sie vielleicht eine Idee, wo das Problem liegt? Viele Grüße Janin

[@yt.myworks]

Hallo Janin, ich denke, dass irgendwas verstopft sein könnte. Hört sich die Wasserpumpe angestrengt an? Bei Kaffeezubereitung kommt gar kein Wasser durch oder sammelt sich es im Auffangbehälter?

[@janinh.931]

@@yt.myworks Hallo und vielen Dank für die Antwort, es kommt gar kein Wasser. Der Kaffeesatz wird normal gemacht und landet im Behälter. Der Kaffeeauslauf ist frei. Zum Schluss hört es sich gequält an. Viele Grüße Janin

[@janinh.931]

@@yt.myworks Hallo, ich habe sie jetzt noch einmal laufen lassen. Sie surrt komisch, es ist etwas Wasser in der Auffangschale, aber kein ganzer Kaffee und sie mahlt jetzt auch keine Bohnen mehr und es kommt etwas heißer Dampf aus dem Fach der Brüheinheit. Ich könnte ein Video von dem Vorgang schicken. VG Janin

[@janinh.931]

@@yt.myworks Ich habe allerdings auch nur wenige Bohnen eingefüllt.

[@janinh.931]

@@yt.myworks Hallo, es wäre ganz wunderbar, wenn Sie mir noch einen Tipp geben könnten. Viele Grüße Janin

[@mctonald]

Welche Poliermaschine kommt denn hier zum Einsatz?

[@yt.myworks]

Proxxon 29820: amzn.to/3vbQzCv

[@ayshamnamom5945]

Good work....😍

[@danke4051]

14:38 I connected this one wrong way. Flodden the machine in water. Thankfully after drying it works perfect again.

[@not-ya-business]

Can you make an honest recommendation on the easiest maintenance between Siemens, Saeco, Jura, and Miele, based on your experience? Any other recommendations from other manufacturers are very welcome.

[@yt.myworks]

Do you mean the care in daily use or the service of the devices after a few years?

[@not-ya-business]

​@@yt.myworks daily use please. Regular maintenance's including lubricating of the brew units and so on.

[@zoranbozic8592]

How many work hours have you spent on machine. And what do you usually charge for this kind of work.

[@yt.myworks]

@Zoran Božić I have to invest about five to six hours of work in such a repair. With the filming it's three weeks ;-)

[@zoranbozic8592]

@@yt.myworks I thought so.Making videos is really time consuming.Since you are perfectionist when servicing I expect you to make videos like you service machines.Anyway great job.

[@mirceamihairusen536]

Respect 💪🙏🏽

[@SjubYT]

Ich arbeite im Service von Jura und muss schon sagen, deine Videos beeindrucken mich. Hast du dir das alles selber beigebracht oder hast du bestimmte Zertifikate?

[@yt.myworks]

Vielen Dank! Nein, leider keine Zertifikate und war noch nie in einem Service von Jura, DeLonghi etc.

[@SjubYT]

@@yt.myworks Respekt, muss ich wirklich sagen und sehr sauber 👍🏼

[@randommusings48]

I love your videos. I know you only refurbish and restore coffee machines but you can do a video on dialing in on a superautomatic machine? Thank you!

[@yt.myworks]

you mean an espresso machine with portafilter?

[@23diets]

Hej, Danke für die schnelle Rückmeldung. Ich denke, so mach ichs auch. Grüße..

[@pa1__qwerty]

You need 10torx for most of the screw and 15 torx for mill/grind screw.

[@catamarian4221]

You are very profi..... Thx ..... 👍👍👍👍👍🤝🤝🤝🤝🤝🤝

[@23diets]

Hallo myWorks Betrieber, vielleicht kannst Du mir einen Tipp geben: ich besitze eine EP 3550 , also modell ähnlich dem hier gezeigten, nur, statt Panrello Michbehälter. Seit vorgestern reagieren die Tasten nicht mehr. Also Einschalten über den Standby-Button funktioniert, dann folgt das Aufwärmen und Spülen , dann folgt Entkalkungshinweis . Ab hier reagieren die Tasten nicht mehr, auch nicht der Stand-by-button zum Ausschalten. Kaffeebezug ist also nicht möglich. Displayanzeige ist da, das Öffnen der Tresterschulade oder der Serviceklappe verursachen den entspechenden Warnhinweis. Ich habe die Machine nach Deiner wirklich sehr anschaulichen Anleitung geöffnet, gereinigt, konnte aber nichts feststellen, Auch die Steuerplatine hinter den Knöpfen sah unauffällig aus, habe sie aber dennoch mal mit Isopropanol abgepinselt. Leider ohne Erfolg, ebensowenig das Trennen des Gerätes vom Stromnetz über Nacht. Meine Onlinerecherche führte auch nicht zu einem Beitrag, der diesen Feher dokumentiert. Ich fand auch keine Mögichkeit , das Gerät zu resetten, gibt es das etwas? Hältst Du es für sinnvoll die Platine zu tauschen,? Ersatzteil kostet ca 28.-€ +Versand. Gruß aus Köln , Diets

[@yt.myworks]

Hallo, die Elektronik ist leider nicht meine Stärke deswegen kann ich hier keinen konkreten Vorschlag für dieses Problem geben. Anderseits 28€ für die Bedienplatine ist wirklich nicht viel Geld, andre Hersteller verlangen da schon mal ab 70€ aufwärts. Ich denke es wäre ein Versuch wert, da du je schon alles sauber gemacht hast usw. Wünsche viel Erfolg!

[@23diets]

@@yt.myworks so, habe die Platine jetzt getauscht und voila, Maschine funktioniert wieder. Danke nochmal für die gute Demontageanleitung.

[@user-vg9le7dj1u]

Спасибо большое, нашел свою проблему, разобрал, а как собрать забыл 😁

[@sicklecell9999]

I was mesmerized. thanks! So... I have a very odd problem if you have a minute. My machine (philips 3200 fully auto LatteGo) works PERFECTLY.... for the FIRST latte. Then I have to wait 30 minutes or else, for the 2nd latte, it sends the hot water to the brew unit instead of the milk frother/container. and of course the brew unit isn't ready to accept the hot water and the spout isn't linked up with that little cup that comes up to meet it, so water just flies into the brew unit cavity area instead of going to the milk. But if I wait 30 minutes, I guess something cools down?... it works FINE AGAIN. (it always makes hot water or espresso; the only problem is with milk drinks). I've completely taken apart the brew unit, cleaned, greased, new O rings, assembled; I've descaled, etc... The machine works perfectly, but only for ONE latte; then wait 30, then do another latte. Crazy eh? I think something must have a hairline crack and expands and breaks an elec connection while hot...then cools down and the cracked connection comes together again? any ideas? THANKS !

[@yt.myworks]

Hello, I have not yet repaired this Philips model. I would open the case and see where the water is going. Maybe a solenoid valve is broken or a seal as you suspected.

[@Tag-Traeumer]

Danke! Nun werde ich leicht an den Sicherheitsschalter kommen, der Mikroschalter bei 3:27 links unten im Bild, der einen schlechten Kontakt macht und immer für nervende Unterbrechungen sorgt, die dann jeweils ein Klopfen und Schlagen nötig machen. Werde ihn wohl einfach überbrücken. * Das ist keine Gefahr, weil er nur die Klappe rechts und die Schublade absichert. * Alternativ könnte ich die Kontakte im Schalter ölen, wenn das Schaltergehäuse durchlässig dafür ist. Ölen mit nichtharzendem, säurefreien Öl, Ölspray, Universalöl, hilft immer gegen Oxidation und den davon bewirkten Übergangswiderstand, bei allen Schaltern, Steckkontakten und Potentiometern. * Nachtrag: Den Schalter nur zu überbrücken, statt sein Kontaktproblem zu beheben, war eine schlechte Idee, wie ich zwei Tage später feststellen musste. Bleibt dieser Schalter nämlich dauernd eingeschaltet, stoppt die Maschine nach einer bestimmten Anzahl Portionen (etwa 11) und die Anzeige „Kaffeesatzbehälter voll“ leuchtet. Die Maschine misst gar nicht wie voll der Auffangbehälter ist, sie hat keinen Sensor dafür (wie den kapazitiven beim Wassertank), sie zählt einfach nur die Portionen seit dem letzten Schalteröffnen. Darum zeigt sie auch immer mal wieder bei nicht vollem Behälter „Behälter voll“ an, wenn man den Behälter bei ausgeschalteter Maschine leert, das registriert sie offensichtlich nicht. Habe heute den Schalter geöffnet, die Kontakte (waren sauber) geputzt und alles reichlich geölt. Funktioniert nun definitiv wieder.

[@russian9134]

👍😉

[@nikeroy9018]

it looked so clean afterward but just thinking after one brew it all goes back to the same as it was.....

[@yt.myworks]

It takes months until it gets so dirty again.

[@joelin4676]

Why is this so satisfying 😂

[@Jimzy93]

I know right ?

[@Welk555]

удивлен, что тройник был целый, хотя, надо было проверить :)

[@abdellatifjerrar8906]

Really very very nice Work 👍👍👍

[@pawwwwelo]

Hi. If you have encountered a similar situation, what could be the problem? Thank you!!! - kzbin.info/www/bejne/mXXXaZaehNyCi9k The machine starts, heats the boiler, then tries to pump water and stops. Water recirculation is suggested and many cycles can be done to no avail. If you press the stop button when it shows water drops, it sometimes starts and then runs.

[@yt.myworks]

Hello, I think that something in the water cycle may be clogged. You can hear that the water pump builds up the pressure, but the water still can't get through. In this case, all lines should be checked for clogging one after the other. You can try descaling first, maybe it will help

[@tg6952]

Have the same issue! Did you fixed that?

[@MrFritzl14]

@@tg6952 Had the same issue, for me it was the coffee spout (min #5:50) it was completely clogged 🤮

[@tg6952]

My office paid repair. They just cleaned it for 150 eur :D

[@Yurko69]

Красиво, но бесполезно )))

[@23diets]

Nachtrag : es scheint der gleicheFehler zu sein, wie weiter unten vor 3 Monaten von @crashingtiger beschrieben, wenn ich das richtig verstanden habe....

[@dobozfej4732]

Hey man! Can we get in contact? On Facebook or Instagram or in Email? Pleas let me know

[@yt.myworks]

[e-mail]