Phrozen Mega Wash & Cure: Resin Workshop Upgrade!

[@건담-j7h]

The output is very good. I look forward to it.

[@kerseyfabs]

Thanks!

[@uyi_rl]

Nice, can't wait to see your new upcoming projects! Keep it up!

[@kerseyfabs]

Thanks! Will do!

[@cnc-maker]

For the cleaner, I would think that you could let the dirty contents settle to the bottom, drain off the dirty contents on, clean the dirty contents, and then put the clean contents back into the tank. If you do it regularly, you should be able to use UV lamps to clean most of it. Just a thought. P.S. A centrifuge might help too. :)

[@trzarector]

I usually angle my prints so that the side that will not see most has the supports attached. I need this setup!!!! Im aiming to make larger objects and slicing stuff into parts is not an option and is overwhelming my Jupiter SE. There is now a V2 of the MEGA 8K which im looking at or the MEGA 8K S but the M8K V2 has a higher build capacity. Cool vid.

[@woodwaker1]

You are doing a great job on showing resin printing, but as you mentioned - not for the feint of heart. I don't need the resolution or the hassle of resin, but like to keep informed as to the advances.

[@kerseyfabs]

Understood! Thanks for watching!

[@jimg4585]

How is this holding up? There are a lot of bad reviews concerning leaks on amazon.

[@kerseyfabs]

Mine leaked as well but they provided a replacement part and I got it sealed up.

[@nihlil]

How do you know when to change the isopropanol?

[@kerseyfabs]

You'll need to clean or change your IPA when the prints stop coming out clean or it's just thick and dirty. 😆

[@almonster2066]

Dude, Amazon. 99% IPA - 4 gallons $70 shipped to you. Always use a pre-wash basin with IPA (I used used IPA) and then wash. That way you stretch the length of time the IPA in the wash stays "fresh".

[@cnc-maker]

Can’t you use a dowel(s) on the back side of the build plate to assist with removing prints, instead of scratching the build plate?

[@kerseyfabs]

I have to do that sometimes, particularly afterwards for cleaning up. It's a bit more time consuming and it doesn't always work to remove parts.

[@lokeshart3340]

We want Iron Man Helmet tutorial

[@kerseyfabs]

Still working on that one!