Nice dude! Whats the kit on it or you just swapped the engine with 125cc?
@tajln4 жыл бұрын
Currently it is just a swap. Engine is a 125 2 stroke piaggio for 10 inch wheels that was used on old typhoons and skippers. It has the regular zip wheel on it. It has Giannelli freeway exhaust and 21mm polini carb with a performance air filter. The frame is from a 4t zip so I have to use mixture for fuel. Electricity is compatible and the only thing modified were the connectors. The 4t zip also has only 1 ac output and the other one shorted to ground so I had to do the same.
@princher Жыл бұрын
@@tajln Oh I did something similar with an old zip I had. The engine on it was practially unusable so I took and completely teared it down. I bought a 125 4t engine for it from a scrap Zip. I lowered the suspension to make it look as similar to an original 50 as possible but also tuned the engine with a 28mm PHGS carb and a 150 something kit. Worked really well, until I ended up with the police behind me, chasing me for a little bit before the backend slipped out due to an oil spill (unknown to me). Had to ditch the bike and run. Never saw the bike again after that and I don't really feel like contacting the police over that 😅
@tajln Жыл бұрын
@@princher you probably had the old pre-leader type 125 engine. They are found on piaggio sfera 125, old piaggio liberty 125 and aprillia habana 125. The habana and sfera have 10 inch wheels so I assume you were running that. There used to be a 140cc cylinder kit available for them
@princher Жыл бұрын
@@tajln Ah, yeah. wasn't really sure what bike it came from since it was just labeled as "Zip 125 motor"
@widocznieniewidoczny2806 Жыл бұрын
Ja teraz planuje podrasować moje pgo
@tajln Жыл бұрын
Goodluck, there is mucu you can do
@widocznieniewidoczny2806 Жыл бұрын
@@tajln dzięki
@valentijn26912 жыл бұрын
wich gopro do u use?
@tajln2 жыл бұрын
Hero 4 black
@valentijn26912 жыл бұрын
@@tajln thx bro nice zip
@tajln2 жыл бұрын
@@valentijn2691 thanks
@_M_-mg3ix3 жыл бұрын
how tall are u ?
@tajln3 жыл бұрын
176 cm
@freddykrueger_21362 жыл бұрын
Je moet je luchtschroef opendoen man en goedafstellen trekt ie autowheelies heb je dat gezeik niet toch
@j0d1623 жыл бұрын
Top speed?
@tajln3 жыл бұрын
127 kmh
@j0d1623 жыл бұрын
@@tajln is changed and what have you changed?
@tajln3 жыл бұрын
@@j0d162 polini cp 21 carb, gianelli freeway exhaust, some sport filter, polini vario
@fdy5982 жыл бұрын
Ljubljana?
@tajln2 жыл бұрын
Ja
@Julikus11072 жыл бұрын
@@tajln nibed
@backwheelaj79563 жыл бұрын
Which engine mounts have you used
@tajln3 жыл бұрын
From Zip 50 2t
@backwheelaj79563 жыл бұрын
@@tajlni have mine on the same mounts but it vibrates like mad did you do anything else to make it stronger
@tajln3 жыл бұрын
@@backwheelaj7956 No, it doesn't vibrate for some reason, tho another Zip 150 2t with the same mount does so Ill have to compare those 2 someday to see why it happens on 1
@backwheelaj79563 жыл бұрын
@@tajln im just gunna buy the silent block mount n weld it on myself just feels abit baggy the engine n the bike does over 100mph for the sake of 200 pound 4 the silent block its worth it
@backwheelaj79563 жыл бұрын
Ive been reading your wiring posts on scootershack aswell just got the regulator off the 125 not sure if its possible to use the typhoon 80 regulator
@cobanovski39522 жыл бұрын
koncna?? in use kj mas tunano
@tajln2 жыл бұрын
Sou je 127. Polini 21 ferg, sportn filtr, cdi je od vodno. Vrjetn je se kej ampak nism js masine sestavlu in je use tko kokr sm dubu.
@cobanovski39522 жыл бұрын
@@tajln bolanija bom sejz nabavu ksno 125tko za projekt