PID19 - Siemens PID09 - Auto-Tune PID Parameters in TIA Portal PID Compact

[@0101xinyipeibao]

Very good video for learning PID tuning. Mnay thanks.

[@electricalautomation]

Glad you liked it! Welcome!

[@parinya38888]

Could you tech PID_temp for cascade control?

[@electricalautomation]

What's your application my friend?

[@ggchavhan]

hi, its very excellant, but I am facing a problem that every power off to on of PLC PID block is going inactive, I I need to start measuring and start PID COmpact.. why this is happening?

[@electricalautomation]

Not sure which CPU and which revision of PID you are using. Note different firmware of S7-1500, S7-1200, and different PID revision has not same on the inactive, manual/auto switch. Please, please check the online help for the "MODE" switch. You can use a INT =3 Auto or 4 Man to control the 'Mode' of the "PID_Compact" and apply a Rising Edge to "ModeActivate" to trigger the mode change.

[@franciscocarlos8897]

Show top demais

[@electricalautomation]

Thanks! The videos PID19 and PID20 will show the PID online commissioning base on the PID from Siemens TIA Portal S7-1200/S7-1500.

[@Creativeautomation7]

Can you please provide project file for reference?

[@electricalautomation]

PID Control with PID_Compact for SIMATIC S7-1200/S7-1500 ID: 100746401 support.industry.siemens.com/cs/document/100746401/pid-control-with-pid_compact-for-simatic-s7-1200-s7-1500?dti=0&lc=en-WW

[@isnainiahmadi1411]

Sounds like boxing comentator

[@electricalautomation]

Aha, I‘d like to deliver the automation passion to others.