Pilon (catarg) telescopic construit acasa . Telescopic pillar (mast) built at home .

[@do7425]

This is exactly what I have in mind for a mast to lift and drop. How does the mechanism work to lift it

[@electro-tehnic]

kzbin.info/www/bejne/eqqpe2qCl9mboK8&ab_channel=Scidkelly

[@seeharvester]

kzbin.info/www/bejne/f5iXhGmZZq6jZq8

[@willemjordaan9439]

Hi, im planing on building a similar mast, bottom 100mm then 76mm then 50mm, all 3mm thick. total height about 12m. Is yours still standing? and holding in winds? I do not plan to put a lot of antennas on, 1 x dual band 2m/70cm then inverted V's that will help keep it steady.

[@electro-tehnic]

Salut , daca faceti cu grosime de 3 nn , puteti pune in varf peste 50 kg garantat . eu am folosit acasti tip de catarg cu antenna TH 7 DX plus roror plus diamond x510 . ( cauta yo3dex foto )

[@lu9mdamendoza-argentina]

Hola amigo! Hermoso mastil! Queria preguntarte si los caños usados son cuadrados?

[@electro-tehnic]

Hola, gracias por tu interés. Sí, las tuberías son cuadradas.

[@lu9mdamendoza-argentina]

@@electro-tehnic gracias por responder. Felicitaciones por el proyecto! Lu9Mda

[@lu9mdamendoza-argentina]

Podrias decirme que medidas de caño usaste para cada tramo? Gracias

[@electro-tehnic]

@@lu9mdamendoza-argentina Nu .. deoarece nu ai bunul simt sa scri in enleza .

[@lu9mdamendoza-argentina]

I am sorry. I was wondering if you could pass on the measurements of the three pipes you used.

[@Themachinewon]

And to top it off you did all the video of the connections when you had it at up,,,, you should have done that when it was on the ground you could have given us more detail

[@electro-tehnic]

kzbin.info/www/bejne/onzEfqJodsamjJo&ab_channel=thang010146

[@seeharvester]

Here's some detail of a similar mast kzbin.info/www/bejne/f5iXhGmZZq6jZq8

[@valentinabarca7471]

Salut ce dimensiuni ai folosit la rectangulara că vreau și eu

[@electro-tehnic]

Salut 100 mm,80 mm si 70 mm . Lungime 4 metri primele doua tronsoane si 5 metri a trei lea.

[@valentinabarca7471]

Mulțumesc dar la ce greutate rezista că sa pui in virf eu asi vrea sa fac pentru eoliană eoliană are in jur de 30 kg. Poate reușești să faci un video mai in detaliat cu montaj.o zi bună

[@valentinabarca7471]

Și ce în nălțime se ridică la macsim .

[@electro-tehnic]

@@valentinabarca7471 11,5 metri , tine lejer 50 - 60 de kg .. nu am la ce sa mai fac filmare :)

[@VideoMontaze]

Does someone have full plan to share? Tnx

[@gigiwhat9159]

Here is a similar Patent EP0201645

[@seeharvester]

I have not seen any plans, but there are lots of videos out there that can give you an idea how to build one. I've been looking myself. :) Here's a couple - kzbin.info/www/bejne/f5iXhGmZZq6jZq8 kzbin.info/www/bejne/iaSrd2Cnn65qrpI kzbin.info/www/bejne/ZoDIhneIer5qnqs

[@robert-px8vu]

Salut cat de înalt poate fi 12m?

[@electro-tehnic]

11 metri

[@electro-tehnic]

14 metri , plus o extensie .. cam 16 metri

[@robert-px8vu]

Stabil ptr o eoliana?sau se mișcă extensiile

[@electro-tehnic]

@@robert-px8vu Depinde de eoliana.. in general e foarte stabil ..ancorat bineinteles

[@jaijohnpaulvu3xjj]

I did one 3 years back...

[@jaijohnpaulvu3xjj]

kzbin.info/www/bejne/Z6uboWp7bLN9mLM