Pine Cone / Dragon’s Egg Tutorial- Right Handed

As so many of you have requested it, today we are doing the pinecone - as per the written tutorial by Beadsisters. You have a selection of ring sizes to chose from! The ones from the original design:
LARGE: ID 7.8mm, 18 SWG
SMALL: ID: 5.2mm, 19 SWG
Then there’s the sizes that I used in this tutorial:
SMALL: ID: 5.15mm, 19 SWG, AR 5.15
LARGE: ID 7.90mm, 18 SWG, AR 6.75
And finally, these are my ring sizes to achieve a tighter cone/egg:
SMALL: ID: 4.55mm, 18 SWG, AR 3.88
LARGE: ID: 7.05mm, 18 SWG, AR 6.02
There is a left handed version of this tutorial, you can find it here: • Pine Cone / Dragon’s E...
Rings can differ from manufacturer to manufacturer; I’ve added the AR for each of my rings so you can make your own substitutions if mine don’t quite work for you ◡̈
Music: Summer - Bensound
www.bensound.com
Support by RFM - NCM bit.ly/37ILNlub

[@WintrBorn]

I love how you zoom in during demonstration. I'm just starting, and this is going to be so helpful, thank you!

[@3rrlia661]

Very nice, practical,wearable , patterns .

[@CactusTree73]

Love this! I just made one and added a small spike charm below. Thanks for another great tutorial!✌🏻😊

[@smurphalla]

Thank you so much. I bought this pattern and have never tried it, but now I will!

[@JRFrostBear]

Just came across your vid, I've been wanting to do this forever! Wish me luck!

[@adrianariego2211]

Hola,buen día hermoso tutorial,gracias,ya hice 3 de los anteriores,muy contenta ❤

[@ShimmeryMoonMaille]

Yay! 💜

[@shannen5440]

Omg so cute.

[@ShimmeryMoonMaille]

I know, right? 😍💜

[@kasie6716]

Please make sure all your work is shown on camera. I have no clue what you did at the beginning of the video as it was off screen.