Mamod SL2 'Sir Huffalot'

[@MichaelWilde.pushbikegraddad]

very nice, I hope to get one one day to join the SL1, SL1K and SL6 in my shed, great video by the way

[@mattseymour8637]

Lovely loco and she's got some power!

[@pauld5818]

hello and thankyou for your video can i ask about the two pipes being soldered underneath to the reverser please ,is this to cut down on steam pressure lost? at the reverser

[@stephenhobbs6400]

We're can I bye live steam mamod

[@johnkuzma7066]

I have a Mamod SL1 that i recently replaced the cylinders on because the glands around the piston rod on the previous cylinders where horribly worn and leaked like a faucet. I thought the new cylinder would remedy this problem but they leek to though not nearly as badly. all this being said i was wondering if you had a remedy for this problem without having to buy new cylinders with glands on them?

[@sxmmmxn1249]

hey, a few days ago i bought an old mamod sl1. i wanted to lubricate the cylinders but the dome doesn’t want to be screwed off. can u help me? cheers.

[@alessandrocolautti4654]

what scale are the tracks? where can i buy them?

[@AceEngineeringWorks]

The track is 16mm/ft (1:19 scale) 32mm gauge. Available from garden railway suppliers, this particular track is Peco SM32.

[@pauld5818]

hello what oil do you use to lubricate down the dome hole please

[@wiltothecollector4420]

erm, putting oil down the "dome hole" isn't realy a good idea

[@wiltothecollector4420]

you should only kinda do that when it has a lubricator

[@tomfuschetti202]

Steam oil , a special blend that dicipetates in the steam exhaust

[@tanfield02]

nice.iam looking for one of them.

[@deanjones5677]

hi just purchased a SL2 off eBay is there anything I should look out for cheers dean

[@AceEngineeringWorks]

Hi Dean, they are so simple that anything that is wrong can be rectified quite cheaply. Probably the most inconvenient thing to go wrong is the boiler inserts start to spin, notably the safety valve one (appears to weep at the base of the safety valve). Only really sorted with silver soldering or a replacement boiler.

[@arthurb354]

Is your railway a circuit or a loop, or is it just a straight railway?

[@mightyalbert1470]

Fancy seeing you here

[@dorsetrailenthusiast6944]

Where did you get your meths burner from?

[@tracksidefilms5416]

So do these run on G gauge track?

[@wiltothecollector4420]

32mm

[@chrisgraham5186]

The original kit form version from Mamod included wheel sets and cylinder spacers for G (45mm) as well as 32mm.