Steps To Strip, Sand, Seal Pavers

On this episode We are stripping, sanding, and sealing some pool pavers. I received this lead through youtube from a customer that was researching how to do the project. We stripped the pavers with Deco Stripacast, used silica sand and sealed them with Sealthane Sealer. The process went very smooth and the customer loved the results. Please like, comment, share, hit the bell so you know when new content is posted. You guys ROCK!
#paversealing #pressurewashing #pavercleaning #powerwashing #brick #paverseal #pavers
THINGS THAT I USE:
18" WOJET 4500PSI Surface Cleaner - amzn.to/48Jl9pf
Yamatic 3/8" 50ft hose a.co/d/gtV22Sx
4K Softwash Bucket Lid Sprayer - / 4ksoftwash
KalKal Boots - amzn.to/4arhX2K.
Huk Boots - amzn.to/3kNF6VH
GET YARD SIGNS HERE lddy.no/10m9k
Suttner Gun - amzn.to/3Uf0fqn
Flexilla 3/4" 100ft Hose - amzn.to/3Duj8yN
100FT 2 wire pressure washing hose - amzn.to/4dp6K4m
J-Rod for 4GPM- amzn.to/3UenlgX
j-Rod for 8GPM- amzn.to/3NuO3Bp
Mosmatic 3/8 hose swivel - amzn.to/3DSS3H4
Downstream Injector for 3-5GPM - amzn.to/3SXw9H4
Oxalic Acid - amzn.to/3fqQhDH
Ladder Stabilizer - amzn.to/2ZqqNOq
Ladder Straps - amzn.to/3GvvuYk
3M Respirator Mask - amzn.to/3GFjZ0C
3M Respirator Cartridge for Masks - amzn.to/3pHR06c
LED Light Strips VERY BRIGHT - amzn.to/3pLSLzm
Flow meter to check GPM out of Spigot - amzn.to/3vQICm1
Fire Extinguisher - amzn.to/3Bzn7aF
Gutter Bags - amzn.to/3GtDk4E
3/4 Uniseal Bulkhead - amzn.to/3nEyXLs
Battery Isolator to charge 2nd battery - amzn.to/3GnSuIC
Mini LCD to see your softwash battery percentage - amzn.to/3pFVqKS
Siphon pump to transfer SH - amzn.to/3CndVaw
EZ Drain tube for pressure washer - amzn.to/3mkdSGP
Follow me on instagram @ PinkflamingoPW

[@godsgrid]

Consider getting a floor squeegee to help push that excess water. Saves times... great video as always.

[@PinkFlamingoPowerWash]

We did use a broom. I just didn't edit that part in. It was way easier with the broom

[@godsgrid]

I had to redo my statement after seeing the push brooms lol. My bad for jumping the gun 😂

[@PinkFlamingoPowerWash]

@gabrielgonzales9904 lol it's all good.

[@roman0835]

You a brave man working around that koi pond. I didn't get a strip, sand and seal job once because I told her I wouldn't clean the walkway with sh along the koi pond. Just strip, wash with water, sand and seal. 🤷‍♂️

[@PinkFlamingoPowerWash]

I didn't use SH either. I wouldn't dare!!! I'd pass up on a job if the pond would be affected. Definitely not worth it lol 😆

[@roman0835]

​@@PinkFlamingoPowerWash definitely not worth it lol looked good man 👌

[@charlidmelioiloveyoudixie9647]

Why u didn’t used SC? Congratulations for your channel 👏🏾

[@PinkFlamingoPowerWash]

Not as effective. It leaves pieces of sealer behind which gotta be turbo nozzled anyway.

[@reyglez107]

I enjoy watching your videos Cliff!

[@PinkFlamingoPowerWash]

Glad you like them!

[@batemanjo9]

Nice seeing a Fitbit Versa in action. I had the 1 and Versa 2. Then went with Google Pixel Watch (hate it) now im going back and getting a Versa 4 😅

[@PinkFlamingoPowerWash]

Thanks. That's the versa 3. It's my w 2nd one cause I dropped my 1st one inside my sh tank a few years ago 😆

[@yankeelover29]

Did you do everything in one day? Keep up the amazing work.

[@PinkFlamingoPowerWash]

On this one I had to come back the next day cause it wasn't dry enough when we came back initially.

[@Chris-nf2ej]

And that's how it's Done!!!! Great one!!!

[@PinkFlamingoPowerWash]

Thanks brother

[@creativeaquariums]

Can 1 month old, non failed, sealer be stripped as easily as failed sealer. Our pavers were sealed but we tinted the sealer and the color is terrible. Need to restart.

[@PinkFlamingoPowerWash]

Yes most definitely.

[@DavidSunshineAquaWash]

It’s a jungle in that backyard amazing

[@PinkFlamingoPowerWash]

Lol Amazon 😆

[@GoldenState408]

what sealer do you use SIR? thank you for your video btw

[@PinkFlamingoPowerWash]

On this video I used Sealthane

[@thomascicalese7844]

Hey Cliff, thanks for the video. Nice job. Where can I get one of those sprayers?

[@PinkFlamingoPowerWash]

Contact 4k softwash. 5163092201

[@davidryba3303]

What tip are you using

[@PinkFlamingoPowerWash]

Turbo nozzle

[@stevej4326]

No backpack sprayer today? Any reason? Also, no silacast?

[@PinkFlamingoPowerWash]

I haven't used a backpack sprayer in well over a year lol. I've been using the 12v bucket sprayer for a long time cause it's more convenient. I still use silicast as well, definitely a good product

[@kennethstolowich]

Great videos like always man

[@PinkFlamingoPowerWash]

Appreciate it!

[@pristinecleaning2540]

Hey bud how did you remove the calcium/efflo? Chem/process? TY

[@PinkFlamingoPowerWash]

It was failed sealer. The stripper took it off

[@yankeelover29]

Hello Cliff. Which sealer stripper and sealer did you use? And where do you buy it?

[@PinkFlamingoPowerWash]

Stripacast stripper and ureseal H20 sealer

[@yankeelover29]

@@PinkFlamingoPowerWash thank you.

[@vman6365]

Cliff, did you change your seal product for this job? Did not recognize the white jug

[@PinkFlamingoPowerWash]

Yea I did. I used a 2 part sealer called sealthane.

[@stevej4326]

No silacast? Any problems with that?

[@PinkFlamingoPowerWash]

@stevej4326 no problem with silicast at all. Just trying something new. I still use silicast though

[@mike3606]

Cliff you taking all the old sand out of the joints?

[@PinkFlamingoPowerWash]

Yes as much as I can at least.

[@DavidSunshineAquaWash]

I assume the old sealer was failed sealer but do you know what brand and was it solvent or water based?

[@PinkFlamingoPowerWash]

Yes it was old failed sealer from about 2 years ago. No I don't know what brand or if it was solvent/acrylic/water based

[@DavidSunshineAquaWash]

Strip like a rock ⭐️! 😂

[@PinkFlamingoPowerWash]

Yea she was pretty bad

[@AnthonyWilson-gi8sb]

to sand and seal per square foot bear minimum $1.50?

[@PinkFlamingoPowerWash]

Depending on your market. I know a couple of peers in NY that gets $2.50-3.50 a sq ft.

[@AnthonyWilson-gi8sb]

@PinkFlamingoPowerWash I'm here port saint lucie fl I'm just starting so I don't know where to start per square feet

[@PinkFlamingoPowerWash]

@@AnthonyWilson-gi8sb oh yea idk what the prices are over there. Sorry.

[@blakenasser7166]

How long until you can walk on it. Like what do you tell the customer?

[@PinkFlamingoPowerWash]

With good sun i say 1 day.

[@jasonspurlin2380]

What about the fish tho?

[@PinkFlamingoPowerWash]

Lol literally explained I didn't use sh back there. What do you mean?

[@jasonspurlin2380]

@@PinkFlamingoPowerWash I mean the stripper

[@jasonspurlin2380]

I heard the sh. But not if the stripper was getting n a be an issue

[@PinkFlamingoPowerWash]

@jasonspurlin2380 It did not get in the fish pond. We were away from it and there's a border around the pond that doesn't let anything into the pond.

[@jasonspurlin2380]

@@PinkFlamingoPowerWash I couldn’t make out a border there. All I saw was the deck but thanks for the clarification. I did hear the no sh.. looking forward to you getting the rig up and running

[@Frankthebank761]

Cliff do you ever have an issue with the stripper getting on the house walls and cage causing damage?

[@PinkFlamingoPowerWash]

Nope. Never.

[@j.d.williams6882]

Whats up my man, would a surface cleaner not work to rinse the stripper? Love the vids brother!

[@PinkFlamingoPowerWash]

It doesn't work as good. It will leave a lot of sealer left behind which will have to be turbo nozzled anyway

[@j.d.williams6882]

@@PinkFlamingoPowerWash Never done it but interested thats why I asked a pro. Thanks sir

[@glennwilliams7754]

I saw that truck too at AmeriTech😂. I kept looking at it and I was like naw, but why does it look familiar??? I texted you as soon as you left. You parked beside me. You looked like you was in a hurry lol

[@PinkFlamingoPowerWash]

Yea we were getting supplies for the next work day ✔️💪🏾

[@jaredscott547]

Dangg man I got excited bc I was hoping you were going to show the mixing 2- part sealer. Lol. Thanks for the videos!

[@PinkFlamingoPowerWash]

Coming soon! Dang it I gotta write that down lol

[@Fromgreentoclean]

Looks great

[@PinkFlamingoPowerWash]

Thank you!!

[@kevinjones1993]

Just one question why did you not use the surface cleaner

[@PinkFlamingoPowerWash]

It doesn't strip as well.

[@JamesERomig]

Hey Cliff...what sand are you using? Where do you get it? And what part 2 sealer are you using?

[@PinkFlamingoPowerWash]

Silica sand. I get it from a local store. Not home depot or Lowe's. Odds are there's somewhere near you that carries that sand. (Some places call it pool filter sand) I used sealthane with that project

[@jerrymeyers2075]

Nice job Cliff. Is that the same bucket head that I won from you on the 15K giveaway? Man that thing smokes it. I haven't had a chance to use it yet.

[@PinkFlamingoPowerWash]

Yes that's the same one. Love that thing!!!

[@randybarlow9587]

Them Koi fish are expensive. Pavers came out great.

[@PinkFlamingoPowerWash]

Yea man I kept my eye on them. I did everything in my power to not affect those suckas

[@nextdoorpowerwashing8340]

Any suggestions on how to grow my channel?

[@PinkFlamingoPowerWash]

Post regularly (3 times a week) Make videos 15 mins Add your hash tags Optimize your descriptions Use keywords Share your channel on other platforms Comment and engage with users on other channels. Be yourself and reply to all comments best as you can. Those are some things that has helped me.

[@nextdoorpowerwashing8340]

@@PinkFlamingoPowerWash Man thank you so much! I have shouted out to you on all my videos...Tell em how great you are.

[@PinkFlamingoPowerWash]

@nextdoorpowerwashing8340 thanks a lot. What's the channel so I can subscribe

[@nextdoorpowerwashing8340]

@@PinkFlamingoPowerWash Next Door Power Washing LLC

[@PinkFlamingoPowerWash]

@@nextdoorpowerwashing8340 pl done

[@MosesMohre-wf9ne]

Getting ready to do strips and and seal just wondering what the stripper was and if you stick with that or if you have found better or worse strippers that’s the part I’m struggling with .. there’s a lot of them great video and you do very good work love it

[@PinkFlamingoPowerWash]

The one I showed on the video has worked great since day one. It has never failed me. I've used it on brick pavers and travertine pavers. It really goes to work within 20-30 mins.

[@MosesMohre-wf9ne]

@@PinkFlamingoPowerWash thank you I got a few more questions about business if you ever get a sec to chat thanks again for all the help love your videos

[@DavidSunshineAquaWash]

I hate stripping! 😂

[@PinkFlamingoPowerWash]

Very tedious. I may do a dual turbo nozzle for stripping soon. And use it on my 12 gpm lol