Pinstriping Basics with DoRr

[@nemesisprojeckt9166]

I wanted to say thank you so much. I have grown up loving the pin striping art and I have had this depressing feeling of the fact I’ll make too many mistakes and you never see mistakes by great pinstriping artists but you’re an amazing pinstriping artist and I watched you fix it and show us ways on how to fix mistakes which beginners and experts will make. You’ve made me feel so much better about learning and doing pin striping I just ordered my first pinstriping brushes and paint. Thanks again.

[@passion4perfection830]

I'm STRESSED OUT holding my breath watching YOU go through the proses.

[@super8car]

I have been trying pinstriping for 3 years now. its so effing frustrating. thank you for giving me motivation to try again!

[@1movista]

This is a fantastic vid. Thank you so much for sharing it. I heard an artist say something years ago that really stuck. He said something to the effect of: The mark of a good artist is not how few the errors are; it is how he fixes the errors. GREAT JOB! I'm headed to the shop to play with my swords now.

[@lucyfurr72]

Great Tips! It's also great to See someone to smooth, clean work. You can learn so much just by watching. Thank You

[@lowrider1007]

best pinstripe instruction i have seen in quite awhile - thank you so much!!

[@jaf506]

A nicely done introduction to pinstriping. Good info with little downtime in the video. Nice job. WRT oil on the brushes, mineral oil (or the motor oil, though I like the clear mineral oil better) is non hardening, and will help displace the hardening oils in the enamels in addition to keeping oxygen away from them. Bottom line is that your brushes won't stiffen up in storage. You can also scrub the enamel oil out with soap/water, but that's hard on high end natural bristles, so this is better.

[@MrReady2riot]

thanks for the dot trick!! i wanted to mention that always starting with your non dominant hand side. so you're right handed start on the left of center, it's easier to replicate.

[@joseywales3789]

@Brian Williams, one other "Trick" that I was taught by an old timer pinstriper, was to use a compass from an old draftsman drawing set to get perfect circles especially around trunk locks and door locks. The draftsmanship compass has two blades that are charged with ink between the blades and draws the circle onto the paper, he advised me to file down the blades until they were blunt and they pick up the paint like the ink. The only time that he used vinyl tape was over the trunk lock hole for the point of the compass to pierce and not move around. He said that before vinyl tape he'd carry around corks of different sizes to stick into the trunk lock and get the centre. Clever stuff!

[@brantleyjoaquin3238]

i know it is pretty randomly asking but does anyone know of a good place to watch newly released movies online?

[@talonalec4282]

@Brantley Joaquin try flixzone. You can find it on google :)

[@beaucoen3769]

@Talon Alec yea, have been using Flixzone for since april myself =)

[@brantleyjoaquin3238]

@Talon Alec thanks, I signed up and it seems like they got a lot of movies there :D I really appreciate it!

[@steveharrigan7811]

I found that starting out with asymmetrical pinstriping gave me instant results I could live with, without trying to get two sides identical right out of the box, and getting disappointed.... Then as I got more confident, I started doing more symmetrical/traditional stuff....

[@griffinartandairbrushing3174]

I'm an airbrush artist and will be starting to pinstripe this summer. Thanks for the video! Nice!

[@stephentroyer3831]

I always look for a little bit of inconsistencies when I see pin-striping, then I appreciate that someone took the time to paint that design.

[@antagonising]

Thanks guys. I appreciate the time and the advice on this video. I'm pumped to start practicing. and practicing. and practicing.

[@88SherryLynn]

One of the best instructional videos on striping I've seen. Some great tips

[@pbr145]

Great Video! This is probably the best pinstriping video i've seen to date. Thanks for posting!

[@f1pitpass]

love it! I'm just about to pinstripe a rocking horse chair, for a new Grandson, so appreciate the tips. Love the skills!!!

[@BenzChick2007]

Doug...my friend.. you have the BEST beginner video on here! just letting you know this! i have seen others on here...your's has been the most informative and easy to view! You are helping me learn how to do this...so thanks buddy! Voodoo larry uses 10w30 too for his brushes..and the ol' magazine trick too...so i think between learning from your tuitorial and asking questions to my buddy Mark Hagstrom as well.. i should be good to go! * just waiting on my paint that's in transit*

[@9119Chips]

Great video! I'm looking at getting into the art; bought a couple of brushes, paints, and other bits of kit and this was very informative! Loved the deck art in this also! I'd recommend that before anyone even wet their first brush to watch this vid! Thanks guys!

[@PickledFrogIcecream]

Very nicely done. Thank you for sharing and also a great video.

[@KatieozzySC72]

This is RAD! THANK YOU

[@pitbullhi]

Thanks for sharing some great tips, I appreciate it when artist want to keep the art alive.

[@tarametalbabe]

Great video. Thanks for the help. Keep posting, tips and tricks. Very informative.

[@stev0mc]

For someone just learning to do this this video is very helpfull

[@CristianRivasQ]

Great information!! Thank you for sharing this video!!! DoRr is awesome!

[@mikecondoluci53]

GREAT VIDEO MAN, IM JUST STARTIN OUT, LEARNED ALOT THANKS

[@surfnharley]

You make it look so easy. Nice.

[@herbeeshop]

wow...my head ached after watching this...geez...super nice work dude!

[@rongarvin8722]

You make it look too easy! Excellent video! Thank you!

[@sanfranciscobay]

Very nice. Most people would not know where to begin with a pattern.

[@pablopicoso]

So confident to do without a sketch. 😎Would love to see you do more. A car or something.

[@dennisschell5543]

Thanks for the lesson amigo! And the little tricks too...

[@jlowrie33]

Thanks for bringing up the direction of the brush for us left-handers.. The training I got always said the flat part always faces the left which would mean always faces the right for southpaws

[@TheWaterboatman1]

this,ladies and gentlemen, is ART!!

[@Stacalina]

Very nice design. Thank you for the very informative video! I am going to try this technique soon...

[@Uclueletmetal1]

So cool, thank you very much for sharing!

[@rcninjastudio]

at last a vid that explains it properly, thanks

[@mowguy1]

Looks like fun, I really like your style, very cool. Thanks for the video.

[@hectorramirez5446]

Looks clean definitely give it a shot....

[@jfoerg1]

VERY GOOD video. Good tips. Thanks for shareing your knowledge with us.

[@MendoVasilevski]

Yes I actually didn't know how to do the dots that way. Thanks mate.

[@donteverlearn]

Dude your desighn was awesome learned so much from your video! thanx again bro

[@groundforce1]

Great video! Thanks for showing your skill set. Board looked bad to the bone. 👍👍👍

[@snackoncierge1]

thanks for the help

[@randy1ization]

thanks for sharing . I mixed yellow , a tiny bit of black, and some white. Lime green .

[@janetfowler7977]

Thanks

[@rowdawg12]

Great Work Man !!! Two Thumbs Up Bruh !!

[@mostepic1]

Thank you, Sir.

[@TheStriper62]

Dear Dorr, thanks from Germany for you excellent explanation would like to see some more!

[@villapinstriping]

Very good instructions! Great video guys

[@black88coupe]

Very cool! Thanks for sharing.

[@luckydog9500]

To store the brush you can use listed oil. Wrap it with a cloth.

[@traviswilliam5453]

Very good. Thanks

[@crystolslimbracey]

thanks for the upload

[@theWWineGuy]

I"m just getting started in striping. Thanks for the info. Well done

[@infiniteandroid]

Awesome… thank you!!!!!!

[@stilldigin101]

Looks like a spartan helmet. With the eyes when he put the dots in. Very cool

[@maineiacts]

Hi! Thank You for sharing,this is GREAT!! Just when I think DoRr is done,,he keeps embellishing even more flair,and it's just perfect!! Very inspiring vid :) Now,,I wonder how much a design like that cost the customer?? Maybe it's already in another video,,this is the first one I have viewed...Well worth watching several times,,he is very talented! Love the color choice as well,,really illuminated! :)

[@PRACERZ]

You make it look way too easy ! Thanks, I will give it a try. Great info thanks !

[@RichardGottshall]

Ryan i loved it, Thank you

[@CraigWhiteIllustration]

Wow!! Amazing. Thanks for the demo!

[@THEAIRBRUSHMANONE]

great work

[@thomasmaarud3209]

Thank you!

[@voodstoc]

Thanks for this.

[@creativerootsstudio]

this was great. thank you

[@RobBallesteros]

Nicely done.

[@danielstanlick8379]

Impressive...a lost art. I appreciate the tutorial.

[@clarecoe3247]

great video!

[@5j1o3h6n]

very nice work and tips,regards from the u.k.

[@BK42Cycles]

Well done! Thanks for sharing ;)

[@lipstain66]

Those little hairs you referred to in your video are on most cloths and fabrics, are called lint ...

[@Thundering34]

Thank you for sharing. Really looking forward to giving it a try. Please say thanks to 'Door' for doing that as well.

[@RichardGottshall]

I like you work. Thanks for the video.

[@tonyholm77]

Sweet, alot of good tips..... More vids like this.

[@batmany2k]

thanks I will try this on a guitar

[@murphfee617]

Amazing job Boss

[@dennisschell5543]

Nice instruction...thanks!

[@gaugeharness6485]

Thanks you helped a lot!

[@MrOneplato]

DDamn, you make it look easy

[@retrogazele]

nice videos! you will be big on youtube if you keep makingmore!!

[@nekronaut32]

i just started today and damn this video helped me alot! my stripping is sloppy but ill get better with practice and patience.

[@angleboxboi]

fantastic basic how to video guys , time to go waste some paint on practicing for me . cheers guys !!!

[@ISORIKAS]

I DID IT!!! im only 13yrs old and i can do it!

[@patriciaheinze4905]

Beau.. absolut perfekt Work 💗

[@MrShawnstoyles1]

Only question I have is if this paint you use is ok to use over a clear coat or do you need to apply a clear afterwards ? and if I wanted to stripe a motorcycle tank do I need to use a special paint to not require a clear coat afterwards ? Awesome work by the way, and great hands man.

[@williamhenry5815]

shawn stoyles

[@shanlon8861]

Awesome.

[@flamingaxe791]

You have some very sought after skills my freind.

[@corvetteracer916]

I began pinstriping today on some paper with One Shot and reducing with enamel, is there a reason why the paint is fading kinda instantly? Could it be the paper? I spray painted it with a flat black enamel.

[@CAPTIANKOLOTH]

HEY BRO... YOU GOIN TO HAVE HIM DO MORE STRIPIN VIDEOS ??????? IM LEARNIN

[@millerpenguin5466]

Nice design

[@趙珮岑-g7h]

really steady hand

[@brucedavis8736]

I like how open you are about fixing your *$%@ups and feel that to be a really helpful tip.. Keeping it real Brother Man "Respect" God Bless your help... Thanks

[@cheriorellana1596]

AMAZING

[@vanepinstriping]

Thanks for the video! Had some helpful tips for me! :)

[@dupchurch100]

very cool man

[@lowrider1007]

Do more!

[@mnkyuncl]

Skills!

[@pauljs75]

A lot better than that other pinstriping video with the campy 60's music that didn't tell me jack. (Guy doing the pinstriping may have been good, but video was useless in terms of instruction.) At least the related videos on the side had this one at the top. :)

[@Luv2draw1]

I cant even draw a circle. amazing techniques

[@SylvioBanker]

thanks - i like your way to teach and comment ... some errors too ;) cheers, Sylvio

[@ekimstrom]

nice job

[@jamiewilson7743]

My brush seems to have a kink in the hairs at the tip- it curves off like a check mark... How do u fix it?