Pioneer Avic-X920BT Bypass

www.SoundManCar...
/ soundmancaraudio
We got the bypass for the new avic-x920bt all figured out and tested. support our videos by adding us on facebook.

[@Brettstv]

Very skeptical, but IT WORKED! READ THIS!! Be patient on the plug, take your time. Then move yellow mute wire over one slot. Then, attach the yellow mute and the light green parking break wire together. Then use both of these and splice with the black ground wire from the other smaller plug. Make sure that wire in grounded. Then WA LA!! People ask about the GPS causing the video to stop because it senses speed...it won't. Just do what I said above and it will work. All other features sti

[@viagraloro12]

hey sound man thank you for letting us know the position of the wire but there's an easier way to by pass it, just add a new wire into the hole and tie wrap it to the harness so it wont come out. so you dont wreck the plug and if you need warranty pioneer will never know you if the by pass it. have a good day.

[@mechanixhorseman]

I answered my own question. On a side note, if you end up breaking the female pin connector like I did, you can go to Fry's and buy a female D-Sub pin connector and it works just fine, instead of buying a whole new harness.

[@jrsgarage7211]

Hi I have in my car a pionner 200bt and I want to install a avic -x920bt! Can I use the 200bt harness on the 920??

[@shanehoward9756]

I had a store install the stereo, they included a bypass switch for parking brake, but when I start driving, the features ( dvd and nav options) get greyed out? How do I solve this?

[@djayarnold5927]

How can I bypass the maps option on pioneer cw-900

[@Point4Dave]

@MusicFan1959 Yes, it does.

[@charlesfarias8037]

Hello. How do I crack the Pioneer F980TV password using the Pen Driver?

[@hutfrd]

What is the reason for doing this? Does it cure the “caution screen may appear reversed” screen o death?

[@mechanixhorseman]

I've already installed my speed sensor wire and parking brake wire. Do I need to disconnect those in order for this to work?

[@natesplaceonline]

Success! Thank you for the vid!

[@Techmaster05]

is that the same wire harness that comes with the unit, or do you have to purchase a seperate one?

[@auadam54]

I messed up and cut the end of the mute wire to where half of it is still in the harness does this mean i have to order a hole harness again.

[@mikewatson2783]

Any idea if this type of mod will work on the Appradio 3? Or is it better to use a toggle, relay, or bypass?

[@HazardPerformance]

Im curious as to if this will work on the x9115bt??? i cant find a write up anywhere!!!! thanks...

[@scaoi]

does that mean you can't mute the unit anymore or does the mute function still work?

[@cpkdude]

Does this cause the units' mute functions (Bluetooth - Audio) to not be functional?

[@BNastyProduce]

3:30 "connect this wire" what wire? the other end of the mute wire?

[@elgringiototote]

is there no way to just get another wire with a pin all by itself? Instead of hacking one out just to move it?

[@sicilianplaya23]

i tried doing this did everything you did but when i connect the 3 wire together an ground them the screen wont turn on ,but when i take the "mute" wire off an ground it seperate the screen turns on.. help me please?

[@gustavomiranda7578]

On mine it says caution screen reverse have any idea how to fix it ??

[@3waver]

is the SIRIUS integration still awful compared to the XM?

[@rdeodath]

Hey is that Doug behind the camera 😱

[@RiQWitDaBliQ]

Is this possible for the avh-p8400bh?

[@HazardPerformance]

@kerberos2006 im curious and have the same question, did you ever figure it out?

[@lexluv9]

if the mute wire snaps off at wire pin connection ??

[@ELCARIN310]

Please help how you turn off this unit I mean completely off! My amps maintain on all the time Please help!!

[@mudskeeter101]

do you connect the wire to anything?

[@spidaey]

Will this disable the ability to mute your unit?

[@gazdkw82]

hi, is this the same for a F9310BT?

[@IADHDD]

Why cut the cable??? All you have to do is open the lock on the bottom of the connector, remove the MUTE wire, slide it in the new slot and then push the locking mechanism on the bottom of the connector

[@aauaa]

will this work on Pioneer AVIC - X9310BT?

[@timtawin]

Tried it on the x910bt didn't work..... works fine but doesn't play movies while moving.

[@xmdude626]

@12HBK which dude?

[@Techmaster05]

@danpark80 Thats why they invented ebay

[@danielbaker4820]

I just earth out the green wire on all my ones

[@jfo420]

this may sound dumb but what does the bypasss do?

[@minor25]

8 years later: it by pass the video (play movies) on the unit. now you can drive and watch movies at the same time. pretty dumb

[@lexluv9]

why cant you just remove the mute wire why move it over and ground an unusable wire

[@fireblade639]

Just take the damn wire and hook it with the ground wire of your hu, that's it. You don't have to buy Any adaptors.

[@Cee_Rawd]

@xmdude626 the dude video taping

[@cjpaish]

Shameless plug @ 1:43 lol

[@ccnadoc1]

You need to cut the connector just open it from the side

[@Cee_Rawd]

haha that one dude reminds me of johnny knoxville

[@HatchetSwinginDrumma]

lol 0:54 "lets see if he cuts his finger off...."

[@VBLUE42]

@spidaey No.

[@Joe1eye734]

a friend just gave me the Avic-930bt. when I power it up it automatically is on the password screen. But I can't enter the password cause the keyboard will not work.. letters and #'s unlit...anyone help

[@minor25]

bro. you need to do this with the pioneer app in your phone

[@jasonpalmer95]

Just fucking do it man.

[@tooreal403]

yall just did that in like 4 mins, i just hit up a guy and he said he would charge me $240 for "parts and labor".......not much parts or labor involved in that lol

[@julianhopes9970]

Bought the 940bt and have had nothing but trouble from it. Won't integrate with the car, software won't initialise so no Navgate, no App radio and no Musicsphere. Pioneer less than helpful. Sat NAv very out of date and wouldn't recognise Westfields Shopping centre in Stratford! Firmware update added a random password which rendered the unit unusable until I took it back to the dealer for a 4th time to have them re-set it. Nothing good to say about either the unit OR Pioneer. AVOID!

[@forevrbumpn]

lol cant you just buy the pin removal tool from Fry's Electronics for $5 - 10 bucks, and do a professional job with the harness? It will save 5:19 seconds of time

[@7olioli]

DON'T WATCH PORNO AND DRIVE @ SAME TIME!

[@khalidman23]

will this work on a Pioneer AVH-X4500BT ?

[@3waver]

Does this cause the mute function not to work?