Pioneer DJM-400 fader replacement
Рет қаралды 4,317
Күн бұрын
@oldschooldjernie 2 жыл бұрын
nice video but I dont solder back on the 2 pins or the 4 pins on the slider because you may get solder between the pins. I just make sure the 2 holding pins are secured onto that little PC board
@djdoop596 Жыл бұрын
Just use less solder. You definitely do want to solder the pins, as otherwise you'll wind up with an intermittent connection. Don't want that while spinning a set live.
@oldschooldjernie Жыл бұрын
@@djdoop596 💯
@Obreratt Жыл бұрын
hey! thats a really nice video! I have a question, my DJM-4OO stoped working and I want to know it it has an internal fusible so I can change it if its burned. Since you opened the mixer, have you seen if it has one? thanks you very muchas!!
@satyavratadas1640 Жыл бұрын
Yes I have seen one on the power circuit, I'm in the process of restoring a djm400 myself they are wonderful mixers!
@ludovikmarlak4109 2 жыл бұрын
Nice.
@janplexy 10 ай бұрын
Absolutely no need for removing crossfader.
Nate the Lighting Guy
Рет қаралды 3,7 М.
Trevor's Bench
Рет қаралды 57 М.
Club Ready DJ School
Рет қаралды 61 М.
EZAS music Tools
Рет қаралды 26 М.