Pipe Fittings क्या है? What is Pipe Fittings? Piping में कौन कौन से Fittings, use किये जाते हैं?

Pipe Fittings क्या है? What is Pipe Fittings? Piping में कौन कौन से Fittings, use किये जाते हैं?
Hi
I am Sanjay Kumar. Welcome to our youtube channel Piping Gyan.
About this Video
इस वीडियो में मैंने Pipe Fittings के बारे में पूरे डिटेल्स में डायग्राम और उदाहरण के जरिये बड़े ही आसान शब्दो में समझाया है। ताकि आप को आसानी से समझ आ जाय। पाइपिंग के दृष्टिकोण से देखा जाय तो ये वीडियो बहूत ही महत्वपूर्ण है।अगर ये कहा जय की इसके बिना पाइपिंग अधूरा है।फिटिंग्स के बिना पाइप कभी भी पूर्ण नही हो सकता है।और जो भी हमारे दोस्त पाइपिंग का काम सिख रहें है। या जॉब कर रहें हैं। या interview की तैयारी कर रहें है। इस वीडियो को देखने के बाद fittings को लेकर जो डाउट उनके मन में होगा वो दूर हो जाएगा। जो भी हमारे viewer, interview की तैयारी कर रहें है।वो इस वीडियो में जो fittings है।उसे बार-बार देखिए और याद करने की कोशिश कीजिये कि ये fittings किस तरह का है। कैसा दिखता है।और प्लांट कहाँ किस जगह use होता है।अगर आप ये समझ जाते हैं। तो पाइपिंग का बेसिक आप समझ गए। बाहर बिदेश में जब shut-down का काम चलता है।तो इंटरव्यू में Client इन्ही फिटिंग्स के फोटो दिखाकर पूछते हैं।और बहूत से हमारे दोस्त Confuse हो जाते हैं। इसीलिये video को ध्यान से देखिए। वीडियो को लाइक और अपने दोस्तों में शेयर किजिये ताकि वो भी इसका लाभ उठा सके।पाइपिंग का पूरा कोर्स सीखने के लिए हमारे चैनल को Subscribe करें।अगर आप हमारे चैनल पर नए है तो हमारे चैनल PIPING GYAN को Subscribe कर bell icon, Press कर All कर लीजिए। ताकि आगे आने वाली हमारी नई वीडियो की Notification आप तक सबसे पहले पहुंचे।
Thanks for watching Video.
In this video I have explained about Pipe Fittings in very easy words through diagrams and examples in full details. So that you can understand easily. This video is very important if seen from the point of view of piping. If it is said Jai that piping is incomplete without it. Pipe can never be complete without fittings. And whatever our friends are learning about piping. or doing job. Or preparing for the interview. After watching this video, the doubts they will have about fittings will go away.
Whoever our viewer is preparing for the interview. He has the fittings in this video. Watch it again and again and try to remember what kind of fittings these fittings are. What does it look like. And where is the plant used. If you understand this. So you understand the basics of piping. When the work of shut-down is going on outside abroad, then in the interview, clients ask by showing photos of these fittings. And many of our friends get confused.
That's why watch the video carefully. Like the video and share with your friends so that they can also take advantage of it.
If you are new to our channel to learn or to do full course of piping, then subscribe our channel PIPING GYAN by pressing the bell icon, press All Take it So that the notification of our upcoming new video reaches you first. Thanks for watching Video.
Channel Playlist
-------------------------
(1) Recent New Video upload
• Playlist
(2)Piping se related jankari
• Piping se Related Basi...
(3)Material se deleted jankari
• Material se Related Video
(4)Fitter se related
• Fitter se Related Videos
Follow @ Facebook: / pipinggyan-11315003768...
Follow @ instagram: / pipinggyan
Follow @ twitter: / pipinggyan
Follow @ telegram:t.me/pipinggyan
Follow @ youtube : / @pipinggyann
#pipefitting basics
#pipinggyan
#pipefittings
fitting
pipe fittings
Piping gyan
elbow
union
coupling
nipple
tee
valve
pipe fitting basics
fittings
pipe and pipe fitting
concentrc reducer
eccentric reducer
pipe and pipe fitting
pipe accessories
pipe union reducing terre diving elbow
pipe fitting in hindi
half coupling
full coupling
reducer
miter bend
plug
equal tee
plet
swage nipple
types of pipe fittings
fittings of pipe
piping gyan
Sanjay kumar
pipe elbow type
swage nipple
Isi tarah ke piping se releted video late rahate hain.
If you like this video please subscribe my channel PIPING GYAN
THANK YOU FOR WATCHING THIS VIDEO

[@hasnainkareemain7376]

میں نے بہت ساری ویڈیوز دیکھی لیکن اتنی خوبصورت مثال سے سمجھنے والی کوئی وڈیو نہیں دیکھی

[@kalamrock768]

Bahut achha se bataya h Bhai good

[@Mrumairrr]

Very good yar❤

[@sandeepskc9940]

Good job ❤

[@SaifAli-wy9oo]

Nice video sir

[@mohammadshaukhat4755]

Thank you sir aapne bahut acha se samjhaya. So nice video.

[@pipinggyann]

Thanks

[@sandeepkumar1.218]

Nice video sir

[@pipinggyann]

Bhai video agar achha laga to please like to kar dete.

[@ankeshpalpal3194]

nice

[@pipinggyann]

Bhai, aap logo ke help ke liye hi ye channel banaya hai, Video dekhne , Comment karne, aur hamse judne ke liye aap ka bahut bahut Dhanywad. bhai bus aap logo ka support chahiye, aap ka din shubh ho.

[@ramchauhan573]

Sir Aisa Hi video Banaia aap

[@pipinggyann]

Thanks

[@SohilShoil-s5f]

Good.g

[@shalluahmad6971]

1video Aisa sir ki jo nya me golf contory me inter view me kaam aye Jaise Maan lijiye hm nye hai to hmse kya puchha jaega inter view k dauran

[@binodkahar7502]

Thanks

[@armybrandek56farhan72]

❤❤❤

[@ankitkumar-ol6rk]

Aur achha video bana ke send kr dijiyega 😊

[@pipinggyann]

Bhai channel ko subscribe kar lo Video milti rahegi. Thanks for watching Video.

[@WarisKhan-wl8mg]

bhai long redius me 2 se 2.5 se guna hota h aap 1.5 bata rhe h jo standard redius ka hota h

[@pipinggyann]

Bhai, aapne sahi kaha mai standard radius ka hi bataya hun. Kyonki ye jyada use hota hai. Radius ke bare me Video short me bana hai. Yadi details me video banata to radius 3 prakar ke hote hain. Short radius-- nps ke barabar standard radius--nps ka 1.5 guna Long radius--nps ka 2 guna. Lekin jyada standard radius hi use hota hai. Isiliye maine bataya hai. Asha karta hun ki aapka jo doubt hai wo dur ho gaya hoga. Agar radius par detail me video chahiye to mai bana dunga. comment karne ke liye dhanyawad. Aur koi confusion ho to aap puchh sakte hain.mai jawab dene ki puri koshish karunga. Thanks for watching video.

[@sahilstar0011]

Bahut achha laga video sab samjh gya me thank you sir ❤

[@dasharathram558]

Thank you sanjay bhaiya very nice pdf uplabdh kijiy ,,kya watsapp se pdf bhej sake hain?

[@pipinggyann]

Dasharath Ram ji, aapne Comment kiya hai ki very nice pdf upalabdh kijiye. Lekin bhai mai ye samajh nahi pa raha hun ki kis pdf ki bat aap kar rahe hain, thora details me batayen jisase ki mai aapka help kar saku. Thanks for watching Video.

[@mithileshkumar-kw5ge]

वाल्व ke bare vidio banaiye❤❤

[@akhlaqueazad5531]

Sir ek biral nipple hota h wo kha pe use krte h...

[@pipinggyann]

Biral nipple ek chhota sa pipe hota hai. jisake dono sire par thread kata hota hai. Sankre ya tang jagah jahan space kam hota hai.wahan koi pipe damage ho jaye to wahan isaka use hota hai. Thanks for watching video.

[@deepvijay6874]

Sir drawing ke bare mein ek badhiya sa video banaaiye

[@pipinggyann]

Bhai Drawing ka video bahut jald hi aapko milega. Drawing ka video ko, kai part me banana parega. Tabhi achhe se samajh me aayega.

[@RBM_Bricks_Sohanpura]

Haa Bhai

[@AdayaSing]

Pip ka I'd od CF elbow senter ka chart

[@sarojkumarhai1515]

Sir aapka number milega

[@Mechanicalwork143]

Nice information 🎉

[@shreepalverma5376]

Jal Nigam mein

[@mdalikhan4852]

Thank you sir

[@fastdanyadav1890]

Playing mein WC ki hight kitni hona chahie Bal mein

[@RBM_Bricks_Sohanpura]

Thanks sir ❤

[@Mrumairrr]

Ap flunj kay bary men be video bnaien

[@alpeshghaywat7234]

Good knowledge gain

[@PankajKumar-po5ck]

Very nice video Jee

[@israrkhana518]

Sir ji apka samjhane ka tarika bhauth pasand aeya thanks sir

[@mohammadaliwarsi6453]

Video very long😮

[@vijendraprasad2854]

Sir g kya flange fitting me nahi ata hai

[@AdvanceTech12]

Bahut hi helpful hai video

[@pipinggyann]

Bhai, Video dekhne , Comment karne, aur hamse judne ke liye aap ka bahut bahut Dhanywad. bhai bus aap logo ka support chahiye, aap ka din shubh ho.

[@VyashParshad]

Very good sir

[@RajuramNsr143]

Very nice guru ❤❤❤❤❤❤

[@shoaibahmed334]

𝚉𝚊𝚋𝚛𝚍𝚜𝚝 𝚜𝚒𝚛

[@engrdhirajsakhare1501]

Thank you

[@parlegcomedy3249]

Super

[@wasimakram-zw3mz]

Nice video sir

[@mithileshkumar-kw5ge]

Mast video❤❤❤❤ bhai

[@rampraveshmahto3096]

G00d

[@ashishdubeyshreeayodhyadha8702]

वाह भैया

[@ritikrajput-g8m]

Tfortelles

[@dailyshorts1562]

Sir aapke samajhane ka tarika achha hai. Nice Video sir,

[@ranjitpaswan1472]

Sir kis pipe me kitane ka get valve

[@JawaharYadav-b1g]

Sir ham bahut jyada parishrama kiya fir bhi fitter nahi Bana

[@pipinggyann]

Bhai aap ki age (उम्र) kitni hai.aur aap kitne tak pade(पढ़े) ho.

[@somdevtenthouse]

Ye video bahut hi powerful hai sir apka salam hai jay hind

[@fastdanyadav1890]

Bahut achcha video isase achcha video koi banaa hi nahin Sakta

[@Mrumairrr]

Jasy ap ny smjhya kise ki be asi video ni kmal ho boss💌

[@pipinggyann]

thanks.

[@armanhussainhussain405]

Sabse acha information aap se melta hai sir hamko thank you sir

[@shalluahmad6971]

Pipe fiting ka inter view me kya puchha jaega kya hmse inter view nikal paega

[@pipinggyann]

bhai pipe fitter Question Answer ki video dali gayi hai. ek bar channel par jake playlist dekhiye.

[@shalluahmad6971]

@@pipinggyann mere kahne ka mtlb ye hai ki interview nikal paega ki nhi

[@shalluahmad6971]

@@pipinggyann kewal ek hi video hai jisme sb upyog wali chijo ka naam bataya gya hai wahi sirf puchha jaega

[@DilshanSRK]

Sir HDPE aur DI pipe ka video banaye

[@mohdshamim1204]

Amazing and you explained it clearly and genuinely. Thank you.

[@pipinggyann]

Bhai, aap logo ke help ke liye hi ye channel banaya hai, Video dekhne , Comment karne, aur hamse judne ke liye aap ka bahut bahut Dhanywad. bhai bus aap logo ka support chahiye, aap ka din shubh ho.

[@AmarendraGupta-ed8ip]

Thankyou sir ji

[@LaxminarayanMahara]

good video

[@pipinggyann]

Thanks

[@rambilassaini]

Thank you 🙏🙏🙏

[@AshishKumar-te6lf]

Sikhna hai to kaha pe aap ka sentar hai

[@pipinggyann]

Bhai hamara sikhane ka koi institute nhi hai.mai youtube par hi sikhata hun. Jyada jankari ke liye aap hamare telegram se judkar labh utha sakte hain.Description me link diya gaya hai. thanks.

[@ajmeershah3208]

Nyc

[@pipinggyann]

Bhai, aap logo ke help ke liye hi ye channel banaya hai, Video dekhne , Comment karne, aur hamse judne ke liye aap ka bahut bahut Dhanywad. bhai bus aap logo ka support chahiye, aap ka din shubh ho.

[@ritikrajput-g8m]

😮tbananais

[@ankushjagdev143]

शेड्यूल किसे कहते है

[@pipinggyann]

Pipe ki motai ko hi ham schedule kahate hain.

[@surajjaat5855]

Tq sir

[@SanjeevKumar-kb7zg]

Good information

[@दीपेशकश्यप03]

Nice

[@NagendraKumar-u6k1r]

Bahut achha laga sir video

[@pipinggyann]

Thanks.

[@pragneshmangela2908]

Apka video bahuti acha laga sir thank you sirji

[@shreepalverma5376]

Sar fitter ka kam batao

[@shashichauhanchauhan8622]

Bahut bahut badhiya Bhai

[@husanthakur4462]

Thoda sa slow h sir... Baki information 1st class❤️

[@pipinggyann]

Bhai baki ke sare viewer ye kahte hain ki thora fast boliye. Aisa bhi kya ki bolne par bat hi na samajh aaye. jyade sawal jawab ke liye hamara telegram "Piping gyan" ko join kar lijiye.Video dekhne aur comment karne ke liye. Thanks.

[@mangeshmahadik9887]

फोन नंबर

[@pipinggyann]

Bhai sab kuchh to diya hun. Instagram, Facebook, telegram, twitter ID hai "Piping gyan" join karo, aur apane sawal ke jawab pao.

[@anilkumarkashyap3627]

1no. Sir

[@DeepakKumar-v6x4w]

धन्यवाद ऐसी बिडिओ बनाते रहिये ताकि हम सब को नॉलेज मिलता रहे

[@pipinggyann]

Bhai, Video dekhne , Comment karne, aur hamse judne ke liye aap ka bahut bahut Dhanywad. aap ka din shubh ho.

[@ankitkumar-ol6rk]

Such me bahut acha hai video 😊

[@asifiqbalasifiqbal4236]

Nice

[@intakhabalam3377]

Bahut acha

[@imteyazkhan3322]

Good

[@subashyadhav1207]

थैनकयू

[@shamimalam797]

Cap or plug dono kha use hota hai?

[@pipinggyann]

Bhai plug wahan use hota hai, jahan pipe ke andar thread yani churi bani hoti hai. Isaka example aap plumber ke kam me dekh sakte hain. Bathroom me plumber log nal lagane se pahle sabhi jagah plug hi lagate hain. Cap pipe me pipe ke bahar topi ki tarah use kiya jata hai. Jaisa ki video me dikhaya gaya hai. Thanks.

[@shamimalam797]

@@pipinggyann ok thank you.

[@yuvansharmachannel3022]

Ek pipe ja raha hai usmein bich mein se ek pipe nikalna hai to kya karna padega

[@pipinggyann]

Tee lagega

[@viralnk2112]

Nice video 👏👏👍👍

[@innocentfaisal6747]

Very good video and thanks to you. 👍👍👍👍👍

[@pipinggyann]

Bhai aapko video agar achha laga to please video ko "LIKE" jarur kijiye. Isase hame video banane ke liye motivation milta hai. Thanks

[@PrashantSingh-xw9jd]

Best video❤

[@pipinggyann]

Bhai, aap logo ke help ke liye hi ye channel banaya hai, Video dekhne , Comment karne, aur hamse judne ke liye aap ka bahut bahut Dhanywad. bhai bus aap logo ka support chahiye, aap ka din shubh ho.

[@manjeetram1756]

बहुत सुंदर जानकारी दिया भाई

[@pipinggyann]

Bhai jankari achhi lagi to video ko like bhi kar dete. Isase hame bhi video banane ka motivation Milta hai, ki hamne kuchh achha banaya.Please like & Subscribe.

[@gopalbaria4378]

સર ગુજરાતી માં બોલો ને લખો

[@pipinggyann]

Bhai hamari video ki language hindi hai. Aur agar aap english read kar sakte hain to niche likha aata hai. Thanks for watching video.

[@SiP-gu1yg]

Thanks for advice sir ☺️

[@pipinggyann]

Bhai aapko video agar achha laga to please video ko "LIKE" jarur kijiye. Isase hame video banane ke liye motivation milta hai. Thanks

[@varaprasad1670]

GOOD INFORMATION ABOUT PIPE FITTINGS, VERY EASY TO UNDERSTAND

[@pipinggyann]

Thanks.

[@varaprasad1670]

@@pipinggyann hello sir, your videos are really interesting, currently I am working in Italy, my company is a manufacturer of pipes(composite materials) as I am a fresher I have a zero knowledge of piping , so I must have complete piping knowledge on piping, by seeing your videos, I really gained good knowledge on piping's, but I just want to know how cost estimation will be done by seeing the isometric diagrams, like calculating spool weight etc....how much weight will be and what is the cost for that spools... Not only that please let me know other pipe information which are important because I am a fresher to this, I just want to become perfect in this to withstand the job and ofcourse I am interested in learning the topics, thank you....hoping a positive response from you...gn and tc...

[@bhojpuriadabangabr8642]

Best sharing knowledge 🔥🔥🔥🔥🔥