Piper J-3 Cub RC Plane DIY foam ASMR

How to make Piper J-3 Cub RC Plane out of foam at home. DIY ASMR no talking tutorial step by step build video.
Wingspan: 1,19m (47")
Flying Weight: 259g (9 oz)
Materials: 3mm, 5mm XPS foam / Depron
Motor: AEO MF1904 2500KV (16g)
Propeller: 7035
Receiver: FlySky FS-iA6 (7g)
ESC: 12A (14g)
Servos: 5g x 4
LiPo battery: 600mah 7.4V (39g)
Download Piper J 3 Cub RC model plane free plans: numavig.com/plans/Piper-Cub/
P. S. Fuselage nose (battery compartment) better done like • How to make PZL Wilga ...

[@asafgl4281]

What kind a glue is that???

[@NumaVIG]

copolymers of vinyl acetate

[@NumaVIG]

@eimb1999 needed glue for expanded polystyrene. I don't know what is available in your country, may be "UHU Por" or others

[@adminontrollgubben]

@@NumaVIG Foam safe cyanoacrylate

[@pndku]

uhu por is the perfect glue for that purpose

[@99shadows66]

You can search for this online or check your local big box stores EPS Foam Glue 8 oz Styrofoam Polystyrene Foam Weatherproof Glue on eBay or Amazon.

[@peterredlich6322]

Another masterpiece of ART! and what a technique! Thank you so much for sharing!

[@solomon2016]

I always enjoy your ASMR building. Especially while cutting through the crispy foam . And you got skills man. All your works look like machine made models 👍

[@honoriuswal2179]

The best ever. Thanks for this. Congratulations.

[@billkar8129]

Thanks for the video and the plans! Great work.

[@asafgl4281]

That work is amazing, super talent

[@MCsCreations]

Beautiful work, dude! Really nicely done! 😃

[@fureter6986]

Great build techniques and design, very nice!

[@user-ej4ly3cz6d]

Thank you so much for sharing the plans my frent Numa Vig

[@szajba8106]

Hey Numa! You can cover some parts with packing tape before gluing them, especially the wing - it's way less fragile when forming so you don't have to worry about braking and tape remains tightly strechted on surface :) Ironing it is a cool trick too. Thanks for good videos ;)

[@mrmanojrs]

Beautiful

[@tinkeringlabplus2516]

Excellent craftsman ship! Wuderbar!

[@MrMaxeemum]

Excellent video, Nice sharp knife, clean edges. Didn't seem to fly that well though looked like CG was out.

[@MasboyRC]

Nice plane, it's so relaxing when i'm watching your build video. Thanks for sharing, appreciate it 👍

[@jonnydiezpaz769]

como siempre otra maravilla de poryecto, muy perfeccionista, es una verdadera obra de ingenieria. un saludo y me encanta tu canal con estos videos

[@Calthecool]

Very nice. I thought it was an actual store bought product by the thumbnail. Subscribed.

[@sandroeduardo258]

Show fantástico 👏👏👏 muito bom parabéns.

[@Truyen-hay]

nice plane

[@randall4411]

Your videos are edited so expertly are you the camera man ? Expert building! Thanks much for sharing you have made my day warmer here in Michigan . It's a snow day .

[@truckerplanet5344]

Видео супер всё аккуратно сделано очень красивый самолёт ✈️ 👍🏼👍🏼👍🏼

[@ajblair8421]

I love your videos so cool how you make these planes. 👍👍

[@bluebean2174]

I like piper j 3 cubs thank you so much

[@swifteux1]

Good job! 👌

[@MeBoxEduSpace]

very cool!

[@rodsilver17]

Wow that's a better technique its much lighter and fly s better good job

[@relaxandfeel7424]

So nice

[@user-ik2no6ve9e]

Дуже гарно получилося удачі в роботі

[@lhap35]

the glue looks like styrofoam and eva glue, nice work as always

[@ramygad]

Nice work :-)

[@sitkalasin]

ขอบคุณ​ มันสุดยอดมาก​

[@djokinac]

complimenti

[@michaelrobertson8795]

👍 I built one back in 1990 with a K&B 45 Nitro👍

[@alisioardiona727]

Must have been quite a bit heavier

[@foamyflightmaster9385]

Another great build and fly video, very impressive attention to detail.🤗

[@stephensowell9578]

Your design and engineering skills are outstanding, crisp, and accurate, resulting in superb fit and finish. BTY, was it nose-heavy during the maiden? I recently repaired a La Petit that flew like that but could not hang onto it long enough to figure out what was happening.

[@creativechannel9368]

You made it well. The center of gravity looks a bit disappointing. I want to make one too...^.^

[@getayemelese8219]

cool

[@user-xy4dh8zz7k]

Спасибо

[@MrBucknasty1313]

Lathe tools as weights ??? Now I understand the attention to detail......nice plane

[@Marcos18031982]

Top parabéns

Hello Friend. Amazing builds. Do you think 2204 2300Kv or 2212 1400kv should work with this?

[@vaclavhorak1898]

Dobrý den, chtěl bych zeptat čím polepujete model. Myslím tu žlutou pásku kterou potom žehlíte. Děkuji krásná práce

[@noramghislain1258]

thank you but the plane itself measures how many inches. thank you for your reply

[@benza435]

Very impressive! What kind of flight times are you getting on that battery?

[@NumaVIG]

15-20 min

[@alisioardiona727]

Outstading work ! So much effort is put in tiny details ! It must take a very long time to build it while filming it. I build RC planes as well, but way simpler ones and out of solid XPS. How much flex do you have with your very long pushrods ? it helps that they are out of carbon, but the amount of flex is increased by the lenght power 4. How did the flight go ? it looked stressfull, dial a bit of expo maybe.

[@NumaVIG]

it's not aerobatic plane, flexible pushrods doesn't affect the flight

[@shaikmohammadtousif4202]

will it be the depron and glue can be find in amazon

[@MORCOPOLO0817]

Thought about making the same model, same size into a rubber powered job?

[@bipinmoharana464]

Sir. have you given thrust angle & turk roll....in this plane.....? if yes.....then how much.......? please..

[@koolightcool]

Great job. Thanks for sharing, also it would be nice if you can share the setting on the transmitter.

[@NumaVIG]

What setting?

[@koolightcool]

@@NumaVIG how you set the elevation, throttle etc

[@martin.k240]

Koolightcool you can get settings in the Cessna video NumaVIG sent, just search up Numavig Cessna skip to the end where he tests it and the settings video should pop up on the screan

[@luisss4924]

Nice build,very interesting.What store is that were you bought your Depron and glue?. Are you based in Europe?

[@NumaVIG]

Castorama

[@noramghislain1258]

Hello, great job very clean and precise but could you tell me if the plan is in A3? And what dimensions has the plane to see how to print the plan, thank you in advance

[@NumaVIG]

jpeg - A3 (297×420) pdf - A4

[@sgihacks1399]

what camcorder do you use?

[@ronaldquint]

Would you consider building a micro r/c airplane in the future?

[@michaeljacksonjoshephjack4227]

Then how did you plan the length of the wing I did not understand that part

[@sandre_sandre]

Hello, how exactly did you set up your mixes to have flaperons? Did you manage to compensate on the elevator too? I ask because AFAIK the FlySky I6x has only 3 mixes, and it's difficult to achieve certain settings with so few...

[@NumaVIG]

watch my video about Flaperon mix

[@vedrankristina]

Great job!! Please can you tell me what is the length of the fuselage witouth motor? Because somting is wrong with my plans. On your video the fuselage seems to be bigger or you have small hands 😁😁. Thank you for your time!

[@NumaVIG]

length of the fuselage without rudder must be 68 cm if you print in actual size 100%

[@dayatgendut1645]

How do you get CG with a small battery ... because I make not enough weight

[@NickRcPlane]

Can i know what motor u use and prop and battery what size

[@hansverhagen4186]

nice build. where can I get the plans from?

[@NumaVIG]

in description below video

[@SubhashMishra]

Will it flay with 2212 1000kv moter and 10×4.5 propeller and 3s 2200 mah battery and 30A esc

[@NumaVIG]

yes of course, like a flying brick 😄

[@SubhashMishra]

@@NumaVIG Thank you👍

[@shimanosv9143]

Ты художник. Привет из Сербии.

[@patrickb8286]

POUR UNE ENVERGURE DE 1m60 FAUT IL TOUT MULTIPLIER PAR X, EST QUEL FACTEUR DE MULTIPLICATION ?MERCI

[@mousamprasad8757]

It is very nice but I have an problem while printing the plans it comes smaller and bigger. Can you tell each size of pdf Page which size you printed from your printer

[@NumaVIG]

actual size

[@a.m7659]

Bonjours superbe travail mais je ne comprend pas il n'y a pas de de lien pour télécharger les plans.

[@briankanja]

i have always wanted to build something tangible like a drone or RC plane but i just cant(apparently where i live those components are expensive AF)

[@mehmetsalihkurt954]

İ aggree with you. They are so expensive but i have bought those components and made it. Believe me it's worth it.

[@Umarluch]

I don't think they are that expensive. Of course you need transmitter and receiver for start but those are components that you are going to use in many machines. As for the drivetrain, you can get set for less than 20$ easily if you buy directly from China (other parts too). The only disadvantage is wait time but this is something that you should be able to get used to after few first purchases.

[@muhammadramadhan9049]

Where's plan landing gear?i don't find it on the link

[@suchonalighthouse]

Can i use 1000 kv bldc motor and 1500 mah battery

[@raihanaalfiyah9673]

what motor series are you using

[@justinzejler9089]

Is that just simple 3mm and 5mm foam board, what you use?

[@NumaVIG]

XPS foam

[@closed_acc1]

Your planes are super but my country doesn't have small brushless moators,and small electronic .next time can you make little bit big plane

[@bgtffm3408]

i m going to build that monstrum is it worth it???

[@febrianathala7999]

can you help me in making a pc91 plane according to its original form and make a video please

[@user-rc151]

Батарея перевешивает?

[@kamicj3522]

NumaVIG I think I scaled mines a little bigger the only problem is I don’t know what my wing span should be

[@NumaVIG]

wing scale 1:10 look at the small wing in plan and measure it

[@kevinwermann]

Nose heavy in the test?

[@Calthecool]

As someone who has sliced both of his thumbs open, 9:45 makes me very nervous.

[@robertomartin8731]

what type of glue are you using?

[@NumaVIG]

copolymers of vinyl acetate

[@keshavbhatt4005]

Which materia are you using to make body

[@NumaVIG]

XPS

[@Dive777]

По ощущениям, посадка была жесткой, сильно не угадал с центром тяжести. Цел остался?

[@NumaVIG]

нос помят, надо вдоль распорку снизу добавить

[@trol2086]

What do you study?

[@gioreviews4266]

Which parts are 3mm and which are 5mm? I think you only use 5mm, Am i right?

[@NumaVIG]

3mm used at the wing only

[@user-zc4sr9ex6h]

Поделись пож опытом с начинающим )) Как ты так настроил подкрылки на посадку ?

[@NumaVIG]

в том месте подсказка на мое видео про Флапероны

[@user-zc4sr9ex6h]

Спасибо, смотрел на ТВ боксе там не вылезают такие ссылки.

[@nandu1124]

Flying time??

[@rcguy825]

There's David Cyplenkov on your glue

[@marceloribeiro9911]

Do you print on A3 sheet?

[@NumaVIG]

all plans in actual size

[@tonirrapido8080]

Hola perdón cuanto mide de largo el ala que no se donde lo pone pf contesta

[@garycopeland1798]

The Titan wild glue is made in Russia and I couldn’t find it in the US. If someone knows where to buy it in the US please let us know.

[@michaeljacksonjoshephjack4227]

We've 47 inches long and if that section doesn't lengthen we can get any length we want

[@tonirrapido8080]

Hola cuanto mide de largo el ala que no se donde ll pone pf contesta

[@gay56347]

Do you sell all your plane

[@user-qs8cs3hx9u]

Dove trovo la colla Titan wild ?

[@user-vr6yv9gk3k]

Подскажите, как называется материал который Вы используете вместо потолочки

[@NumaVIG]

подложка под ламинат, все же видно начиная с 0:18 даже ценники

[@user-vr6yv9gk3k]

На сколько я понял она у Вас абсолютно гладкая? Размеры 1200 на 500?

[@Humayun-Najabat]

Fusilag size ...

[@vitalyzaretskiy3363]

Уважаемый вы в каком регионе России? Если не секрет конечно) скрачбилд весьма на высоком уровне! Респект!

[@pavelgurenchuk2225]

Wtha is scrach build?

[@sgihacks1399]

you can build one f-22 rc plane or mustang ?

[@NumaVIG]

soon I will start making a series of WW2 fighters

[@sgihacks1399]

@@NumaVIG Good,with plans?

[@nicolaumonteiro4582]

Hi, the wing was made with depron 3mm?

[@NumaVIG]

yes

[@nicolaumonteiro4582]

Thanks for the quick reply! You rock! I have two more questions... Is it okay to use a sg9g servo? Also what is the plate that you used to hold the motor?

[@NumaVIG]

0:48

[@nicolaumonteiro4582]

What about the sg9g servos?

[@NumaVIG]

I use 5g servos on 300g planes, but you can use whatever you want

[@flycaptainkama3701]

Please link to buy these deprons.

Onde eu encontro o material , se vc pode me responder eu agradeço .

[@Umarluch]

What is the iron temperature when you are ironing packaging tape?

[@NumaVIG]

as high as possible so as not to melt the foam

[@Umarluch]

@@NumaVIG do you happen to have any program knob on it? Could you let me know what program is that or what temperature? Or how many dots are by the knob indicator?

[@NumaVIG]

take a small piece of foam and try

[@Umbertosf2]

in the video you can see that when you measure the side member to form the drop of the wing I speak of the second you measure 1.5 cm while when I go to print naturally on A4 paper it measures 1 cm for what?

[@NumaVIG]

what minute of the video?

[@Umbertosf2]

@@NumaVIG 6:53

[@NumaVIG]

.jpg need to print A3. A4 is only for .pdf all plans is actual size (100%)drive.google.com/file/d/1G2SWgyfttD2nKJbNcCIyFR34NMD4Xe1L

[@Umbertosf2]

@@NumaVIG sorry I was wrong to print anyway already almost finished the plane came much smaller I'll let you know if it flies hope for everything thanks hello

[@user-kx2tt3py2g]

i can replace by 2204 motor with 6045 propeler and 3 servo 9gram, 3s 850mah lipo battery

[@NumaVIG]

6045 prop too small

[@user-kx2tt3py2g]

@@NumaVIG when i test 6045 prop with 2204 motor. Thrust test is 600+gram;>>

[@NumaVIG]

www.google.com/search?q=how+big+should+rc+plane+prop+be

[@user-kx2tt3py2g]

​@@NumaVIGso i print plans on A5 paper, so i had plane wingspan 60cm, i had 1404 4600kv use 4025propeller. It can fly(esc 12a and 3s lipo battery 450mah)

[@NumaVIG]

can fly or can fly better, choose yourself

[@gioreviews4266]

Numa, where is the cg? It is not marked on the plans.

[@gioreviews4266]

I found that in one comment you said on balsa spar🧐😉