Piranha 140cc Pit Bike Engine - WHS-1143 - Pit Bike Update SPECIAL!

[@lopezt13]

Keep making these types of videos it helps walk thru for little experience!

[@brian636]

🫡

[@Jazsft]

Awesome vid guys still the most reliable engine I’ve ever used in the past never missed a beat literally put it thru hell my cousin done the same never even replace the factory oil :( but still lasted for years of punishment Please do a vid of the 146 and z40 upgrade and the power difference they make

[@dirtracing1]

I’ve installed this engine in my Apollo rfz x18 and runs perfectly thanks guys

[@meganfitzgerald651]

Love these types of videos. Very informative and when my apollo rfz 125 wears out this is the motor I'm anxiously wanting and been wanting to purchase

[@vincetboltusa4917]

Thanks man !!

[@WestHaddnin]

I just did a 2 minute video of me cussin mad as hell at TBOLTUSA bout to post it but I deleted it. All info I came across it kept saying it’s a direct bolt onto the Honda engine . Yes that’s true, but VERY MISLEADING. I can’t use my STOCK foot pegs and I just BARELY found out when I’m trying to install everything . I’ve had this engine for like 3 weeks preparing everything for my build to knock it out all in one day bruh. Now I find out in the middle of my build while my engine was already out that my stock pegs don’t fit?! Now I gotta waste another couple weeks waiting until I get paid cuz of bullshit information on TBOLTUSA’s end. I screenshotted their info and it says “recommended” foot mount. And on top of the s/c it warns users about clearance issues on another bike But nothing on the crf50. Waste of my time dude that’s bullshit bruh. Could have left my other engine on and enjoy my bike while I wait for parts. I’m beyond frustrated right now man.

[@fredwinky12]

These guys are awesome to deal with. Customer service is top notch and communication is gold. I ordered this motor a few weeks ago and installed into my SSR125. Plug and Play! Started 2nd kick and after properly breaking in the motor, it rips!

[@patty2Strk]

Apollo rxf (yx)140cc open 14/12 With 97hrs on it I'm 280lbs thing is just a monster !

[@hybridEP3]

Anyone running a v2 head on this motor? I bet it would be ridiculous on a crf50

[@peddeler2]

I bought two Piranha 125cc engines from Tbolt for my 1991 and 1992 ct70s. Very similar to the 140cc engines. If you are installing these on a 91 thru 94 CT70, the cool thing is that the stock stator plate from the original 72cc engine is interchangeable with that stator plate for the Piranha engine. Swap the stator plates and it becomes plug and play, no need to modify the wiring. Im running mine with all the stock Honda electronics with no issues. There is no lead for the neutral light though. This was for the 125cc piranha, I believe its the same for the 140cc kzbin.info/www/bejne/oHjPgn6JZpZ2abc

[@jevinhauke974]

Ink lp00 90cc 8 m 987pjl lol jl pl k9😅you 7😅009p0 p 000😮p it m is m😅p😅looked ikn,kiln, 7j on map p 0p😊01 2😮op😢05p565p09 I I'm😢😮0ex 01 250ex 7kp😢😢😮😢4p0809 pl00p5555555555 p0650

[@frankminneci2966]

After break in can I use synthetic oil

[@TBoltUSA]

After break in synthetic should be fine

[@gordonpotts753]

Nice job. I appreciate the obvious honesty and integrity.

[@damorej416]

I have a 2012 pirahna with a yx140 engine. I race it quite a bit and run it hard everytime I ride it and she starts up without a problem everytime. I’ve recommended piranha bikes to tons of my buddy’s and recently sold my 12 because I purchased a 18 with the 12&14”wheels. One thing I noticed is my 12 had the oil cooler on it. Wondering if this is a good option for these newer bikes or do you think it’s not necessary?

[@KFLY67]

Hey are you guys based out fo Portland, oregon?

[@eliveiak1089]

Just ordered a pull starter from you guys today(Friday) before 4pm est, and I bought priority shipping. Should I get my pull starter by Sunday?

[@whiskeythrottletv8408]

Great Stuff! I just bought one for my Apollo X18! Stoked about it cant wait. Thanks again guys keep it up!

[@connorssmallengines6663]

I’m putting one of these on a ‘63 Honda cub 50. Old motors trashed but this ones gonna rip

[@robertshrum5209]

Tbolt USA Rocks I can't wait to upgrade my Laser 6 moped just not sure what route to start

[@oogie-boogie]

you dont have a prob on a honda 50,,,with the head of the motor hitting the front tire?,,i have a lafin 140 and its verry close to the front tire on my bike

[@vincetboltusa4917]

The Piranha 140cc is 15mm longer at the head (just ove a 1/2 inch

[@user-Merovingian1980]

solid engine the yx140 but bare in mind they can be a bitch to start even set up right don't just kick it make sure to go past the tdc before trying to kick they will strip kick start gears otherwise

[@bobbykately9621]

So what are the benfits with the trc ez-start performance cdi exactly? I know u said kickback but is there any other way to correct that or only the cdi box?

[@kmx509]

EDIT: Sorry we were idiots and figured out the major issue on forums. Turns out Lifan motors require people to buy an oil cooler and we didnt get one nor be told we needed one. Motor still runs but we put assembly lube in there for now. We are going to get a new head and get an oil cooler. Sorry for the waste of time. Hey, im back with a more serious question. I got my motor and the clutch is better but we opened the cam area up to adjust the valves. We did them and the exhaust valve was really loose. We got that done and we opened cam cover and it was BONE dry. We looked at the cam and it was so dry it was grinded down atleast a millimeter. We are thinking it was the oil pump??? Please give us your opinion on what happend.

[@prestongriffin416]

will it be good for a honda trail bike step threw 1963 c105 will it fit i do trail riding off road steep hills thank you Preston

[@enricomashall7498]

I love this video, I have a honda cub 90cc, and I'm interested in getting one of these 140cc engine with the full setup that's why you're in and everything, I would like to make contact with you guys.

[@ErikSutphinPhotography]

I'm doing the same swap just got my engine today

[@davidwhite5858]

I was ready to purchase a 125 Lifen engine for my Honda CT70 until I stumbled on to this channel with a Piranha 140 engine and the upgraded parts. Hope they have them in stock when I purchase.

[@pagas5002]

in greece this are called monster racing engines and they are basic we can make better engines with after market parts and a honda or a yamaha even with a kawasaki engine with mach more rielability and power sorry to tell you that that engine aint that special and the most found problem is the engine breaks the crank in the altenator side that can be solved be puting a larger flywheel.

[@Brad_Jenkins]

I'm going to convert my 1981 CT70 to this engine!

[@cadeblain2265]

Do you have any videos on the pitster pro 140cc semi auto ??

[@brandoneckland6668]

where do you find the tank spacers at? i want to put one of these motors in my xr50

[@MrAlexander137]

What’s better a Daytona or Piranha 140?

[@pitgroove.37_66]

If it's sheer power and torque that you want, DAYTONA all the way! If it's fun and versatility that you need, then maybe the piranha 140 is the better route

[@VDM32]

Does this yx 140cc come with the z40 racing cam?

[@jordanward473]

goiod video very goopd ionformation,chers guys

[@tylerswift6683]

super helpful definitely getting one

[@justonovak8216]

Excellent video very instructive. Thanks for all the data your guys show. 5 stars on this.

[@geoffreyjones2000]

Thanks Vince :) you rock sir

[@user-Merovingian1980]

i hope your both still alive great video

[@scotttalken8431]

I believe I have bought 3 engines from you guys. Your awesome. I stayed away from a 140CC motor because my understanding is you having to have a oil cooler. Also I thought a 140CC motor is a bit longer and the motor could rub the front fender. Next motor I buy will be from you guys.

[@vincetboltusa4917]

The Piranha 140cc is 15mm longer at the head (just ove a 1/2 inch You do not need to run an oil cooler on Piranha 140cc

[@daytona6363]

Very good and informative video , good stuff .

[@vincetboltusa4917]

Thanks man !!

[@chevybrat]

Nice presentation!

[@motleygarage420]

epic i found your guys channel ive been ordering parts from you guys for yeaRS iam saving up for a 190 motor for my tao tao hellcat 125 i blew out the shift point cant get it out of gear and when i order the bike it came with a oil leek so new motor save up time epic video !

[@aleemrahim6846]

140cc and 190cc engines have the same dimensions ?

[@prestongriffin416]

add on can you get it in semi automatic?

[@minibikeaction4266]

Please keep producing videos on your products and tec.

[@mlow587]

What kind of Hp can I expect from this 140cc ?

[@monkeyfool4532]

M Low 12 HP is what I’ve heard

[@m3rkinfiniteofwgkta]

Could i put one of these on a honda z50?

[@frankminneci2966]

Where are these made ? USA ?

[@alvarocerritos]

Will 10W-40 FULL synthetic work on pit bike engines?

[@vincetboltusa4917]

Not at break in especially We Never suggest synthetic ever

[@alvarocerritos]

@@vincetboltusa4917 what does NON synthetic do compared to FULL synthetic?

[@TBoltUSA]

We should just never using synthetic during break-in, it's been known to cause the cylinder to be glazed, The rings don't see properly, And your engine will more likely smoke. also your clutch may slip with synthetic as this is a wet clutch engine.

[@alvarocerritos]

@@TBoltUSA even with a yx150 klx-style engine that I'm getting?

[@skydenfukunag8241]

More please😂❤

[@fatbuddycat]

These guys are super cool. I just installed their 3 inch extended swingarm and 330mm shocks on my z50.....amazing products!!

[@squirrelmodelkits8499]

will it fit in a jr 50

[@remi009340]

My Lifan style 125 is shot and TBoltUSA isn't shipping Piranha 140's to Canada now because of COVID? 😩😩😩 My poor CT70 needs love!!!

[@anthonylongoria5917]

Would it fit a cfr 50 style frame looks identical

[@TBoltUSA]

Yep. That's one of the most common applications!

[@matryan3532]

I have an SSR SR110. I know this engine will fit my bike, but I’m curious if my pro circuit T4 will bolt up?

[@karlvalem]

Hi! Can you answer my question please!! Does it fit into YCF 125 2013

[@mattDIY]

Good job 💐💐💐 good luck

[@scottcooper1004]

Wish you guys to do a video on that same motor for 140 piranha but show us how to hook up our lights and make sure battery stays charged. That’s a huge problem with these engines

[@MostlyPeacefulCombatVet]

I stumbled across this video while looking for some upgrades for my girls little 125cc (120cc actual) ATV. I don't even have a pit bike, but want this motor! I don't think my 8 year old daughter would appreciate losing her electric start, reverse, and automatic on her little Midsize quad though.. But Daddy would have a blast! 🤘😂 New subscriber. Thanks for the video, I liked it and the presentation and knowledge is great.. I like all things with motors, and making them better and faster....We will get along. haha 👍 Take care y'all

[@gmoney4797]

Looking to put one of these in a 1980 Honda C70. Will it fit without modification? The bike is 6v but I plan on completely rewiring.

[@ronaldclark7373]

Brilliant video, I have a CWR 140 it’s a fantastic and very fast bike in my little monkey bike.

[@Dirt1994x4]

Thank you so much for all the information. Awesome video you did a great job.

[@Smallbore2wheels]

thanks for the very in depth video

[@vincetboltusa4917]

Thanks for watching

[@amanteapasionado6836]

"Get the upgrade shifter, ya know, chick's dig it" 🤣🤣 hell yeah, I'm sold!

[@st.paulmn9159]

Replace my 2018 coolster m-125? 42 mph. I want 65.

[@aleemrahim6846]

This will fit in Apollo 125cc from no problem no modifications?

[@jamesjohnson9833]

Great shop Engines are perfect when done by T-Bolt USA

[@sickduck66]

Second question. I have a cr125 mount on my kart will this fit?

[@94julius84]

I do not have the ground connection to connect to frame I have the plug ins from the stator. Should I just plug in the ground from the stator and cdi together or bolt them to frame?

[@JimmyGangi]

When will these be back in stock!?!? Can’t find them anywhere

[@kerm9807]

Dear Team Have you tried a 26mm Nibbi carburetor on a 140cc?

[@G-Boyz.Outside]

I would like to put the 160 in my 50

[@AkOverload]

Thank you it answered my question

[@twinturbo3470]

why does the kit come with 2 carburetor heat spacers?

[@JboneApocolypz]

is this good for SSR Pit Bikes? Great video thanks for taking the time to make it.

[@inkcapblack]

Does anyone know where this engine is manufactured

[@hashtag_moto_]

Very informative video thank you you guys are great

[@tarynpreston9568]

Do these engines fit 2016 crf110??

[@williamcullum6676]

Great Video!!!

[@vincetboltusa4917]

Thank you !!

[@Stevesbc406zz]

Hey guy thanx great vid thumbs up

[@robertmacias4690]

Do you have a video on how to wire up lights for a 140 piranha?

[@Gerald07]

I Love This engine from phillipines

[@Tuckem2STOGS]

I like to break them in with rotella t4 high in zinc

[@jevinhauke974]

Does the dial.adjust the rev?

[@grilledtomato5499]

What size front sprocket comes in this motor

[@bobehill1251]

Would this fit a Honda mr 175

[@jered2177]

Good engine for swap in a kymco k pipe?

[@WorksForMeBro]

Very helpful video gentlemen. Thank you.

[@makoafonoimoana9917]

Could this fit on a taotao dbx1 and if so, how would I do that?

[@deathstar562]

will it fit 77" kawasaki kd 80frame?

[@snowst400]

Wow I’m just blown away u guys are number 1

[@Markonacr250r]

Will a regular aftermarket cdi box work? The same as the one in the video?

[@user-Merovingian1980]

yeap

[@jaybankz6302]

So the two yellow don’t connect with nun

[@quayroizmyvybesalexander9647]

How much for one of those engine $

[@zachangelo7670]

my 140 ran great for about year and a half. now it starts for about 3 seconds and dies and wont start again but will just repeat exactly the same thing and flood itself.. any ideas?

[@cameronb9862]

Take apart carb and clean it

[@mocomoto8951]

Anybody put this on an xr70? if so did the stock exhaust seem to hold the engine back so much that you got an aftermarket pipe?

[@TBoltUSA]

We've had tons of guys put the piranha 140 in an XR70. many of them use the stock exhaust and then get it aftermarket pipe a couple months later. The stock pipe keeps it a lot quieter but an aftermarket pipe definitely improves performance

[@jt-ub1xt]

What size jets in the carburetor do you recommend for the 140cc?

[@TURKEYMAN60185]

Please tell me that answer

[@MrAlexander137]

Do you guys ship to the UK?

[@upshiftclutchups665]

My friend got one for his ssr 110. He let a friend of his ride it because he said he could. Well turns out he couldn't it was pinned in 1st gear hitting rev limiter for 15-20 secs and it still runs great to this day. Awesome engine.

[@upshiftclutchups665]

Oh and that was like 2 years ago

[@silentlyfe3660]

so it fits a ssr 110?

[@IBOO57]

They dont have a rev limiter afaik thats valve bounce.

[@marvinstarr5984]

@@silentlyfe3660 Yelp

[@timrr2010]

Will you get anymore of these or have they been replaced by the electric start version? I noticed they are sold out on your site

[@TBoltUSA]

Mass layoffs + Stimulus Checks = sold out engines I'm positive that we will get more piranha 140s in the future. but within a few months and entire years worth of engine sold out. The supply chains were never ready for this.

[@rprokopow]

Is there a reason the piranha 140cc is out of stock everywhere?

[@silentlyfe3660]

amazon

[@D-Day-fb3pw]

Awesome! How much is it? Base price, No extras...

[@dirtracing1]

mike harmon I paid $480 or $500 for mine

[@TravNasty520]

Do you think the motor would fit into a Yamaha ttr90?

[@TBoltUSA]

It does not.