Piston rings | Piston rings explained in hindi | Piston Ring Clearance | Automotive piston rings

  Рет қаралды 190,552

Study ITI Skills

Study ITI Skills

Күн бұрын

Piston rings are installed in piston grooves. Piston rings have the mainly 3 function in piston,those are
● Sealing of combustion chamber for preventing leakage of fresh charge and gases from combustion chamber to the sump.
● scrapping of excess oil from the wall of cylinder cylinder.
● transferring the heat of piston to cylinder wall.
In this video these functions will be explained in detail.
Piston rings are of two types types:
● compression ring and
● oil scraper ring
Compression rings again can be classified classified:
as per the the cross section area of piston piston of piston ring:
Rectangular Ring, taper face ring ring, barrel face ring ring, keystone ring, inside bevel ring
As per the piston ring joints :
Butt joint ring, angle joint ring ,lap or step jointing ring.
Types of oil rings :
Single piece rings,Duaflex ring,T flex ring.
Clearance in piston: piston ring end gap, piston ring side clearance.
In this video these topics will be explained in detail .
for more information please watch full video information please watch full video please watch full video.
#Engine #Engineparts #Piston
Follow me on Facebook:
/ studyitiskills
Follow me on Blogger:
studyitiskills...
Follow me on KZbin
/ studyitiskills
Follow me on Instagram-
/ prashant.dixit.sagar
About the Channel:
These videos are based on Syllabus of ITI (INDUSTRIAL TRAINING INSTITUTE) under the MINISTRY OF SKILL DEVELOPMENT & ENTREPRENEURSHIP, DIRECTORATE GENERAL OF TRAINING. This is based on COMPETENCY BASED CURRICULUM of Trades MECHANIC DIESEL/MECHANIC DIESEL ENGINE / DIESEL MECHANIC / MOTOR MECHANIC / FITTER / ELECTRICIAN / WELDER /MECHANIC MOTOR VEHICLE / TRACTOR MECHANIC under CRAFTSMEN TRAINING SCHEME (CTS).It is aligned to NSQF at NSQF LEVEL- 4 and 5.it come in AUTOMOBILE sector.
It includes the syllabus of TRADE THEORY/PROFESSIONAL KNOWLEDGE, TRADE PRACTICAL / PROFSSIONAL SKILL, ENGINEERING DRAWING, WORKSHOP CALCULATON & SCIENCE.
In these videos each topic is explained in detail with focusing on important points those will be very helpful for EXAMS.
These video will be helpful for trainee of ITI as well as for all DIPLOMA and ENGINEERING students for seeking knowledge and PREPARATION OF COMPETITIVE EXAMS. These videos are for students for preparing them for all GOVERNMENT EXAMS, PRIVATE SECTOR EXAMS & PUBLIC SECTOR EXAMS. this will also help students preparing for exams of TRAINING OFFICER or INSTRUCTOR in ITI.
This channel will be very helpful for RAILWAY LOCOPILOT / LOCOPILOT /ASISTANT LOCOPILOT /ALP aspirants.
With the curriculum this channel will also provide the information about NEW TECHNOLOGIES, information of NEW VEHICLES, etc.
this channel includes the key words STUDY ITI SKILLS,ITI, Trades MECHANIC DIESEL/MECHANIC DIESEL ENGINE / DIESEL MECHANIC / MOTOR MECHANIC / FITTER / ELECTRICIAN / WELDER /MECHANIC MOTOR VEHICLE / TRACTOR MECHANIC,LOCOPILOT,ALP,CBT,AUTOMOBILE,NCVT,NSQF,RAILWAY, TRADE THEORY/PROFESSIONAL KNOWLEDGE,TRADE PRACTICAL / PROFSSIONAL SKILL,ENGINEERING DRAWING,WORKSHOP CALCULATON & SCIENCE, RAILWAY LOCOPILOT / LOCOPILOT /ASISTANT LOCOPILOT /ALP.
You can follow me on facebook :
/ studyitiskills

Пікірлер: 105
@satishvasane6812
@satishvasane6812 4 жыл бұрын
बहुत अच्छा प्रशांत जी बहुत ही अनमोल जानकारी दी है, लेकीन उस हिसाब से व्हिडीओ देखने वाले बहुत कम है आपने इतनी जानकारी इतने कम समय में दी है धन्यवाद
@Writerarpitkahar815
@Writerarpitkahar815 Жыл бұрын
Sir बहुत ही अच्छा vedio है, ऐसा ही वीडियो लाते रहिएगा pleas 🙏❤❤
@SarfarazKhan-rz9lx
@SarfarazKhan-rz9lx Жыл бұрын
Blow by ka matlab h combustion chamber ki gases Ka piston se nichey aa jana jiski wajah se engine oil me carbon ki matra badh jati h aur engine oil zyada kala aur gadha ho jata h
@DeepakKumar-oc1vp
@DeepakKumar-oc1vp 4 жыл бұрын
Super bhi
@Manish-jw9mc
@Manish-jw9mc 2 жыл бұрын
Bhut shandar batyya 😇
@m.skashyap6894
@m.skashyap6894 3 жыл бұрын
Bahut acchi tarah se read karane ke liye
@m.skashyap6894
@m.skashyap6894 3 жыл бұрын
Thanku sir ji 💐🙏🙏🙏
@bhorikpal5552
@bhorikpal5552 4 жыл бұрын
Yah video bahut achha laga sir
@imkrishnathakur
@imkrishnathakur 2 жыл бұрын
Air Fuel Ka Mishran Evem Fuel Charge Piston Or Cylinder Wall Se Leak Hota Huwa Crankcase Main Jata Hai Use Hum Blow By Kehte Hai.
@AHPtractorcare
@AHPtractorcare 4 жыл бұрын
Very good jankari. Shukriya bhaijaan aapka 👍🇮🇳🇮🇳🛠🔨🔧🚜🚜
@udaynayak796
@udaynayak796 2 жыл бұрын
Nicely explained.👌
@assamfarmingpoint1611
@assamfarmingpoint1611 2 жыл бұрын
kzbin.info/www/bejne/mXOYpZ2be7Rqn9E
@Deepesh493
@Deepesh493 4 жыл бұрын
Bdiya sir ji 👍👍👍
@mahi-xx9rg
@mahi-xx9rg 4 жыл бұрын
Supab sir ji
@Nitishtekam885
@Nitishtekam885 Жыл бұрын
सिलिंडर मे पिस्टन के दाब के कारण क्रैंककेश में बनी गैसें blowby गैसें कहलाती हैं
@omveersingh5894
@omveersingh5894 4 жыл бұрын
Sir ap bhot aage jayenge..
@devendrarajawat431
@devendrarajawat431 3 жыл бұрын
Dilution pr bhi video sir
@VishalKumar-bs3qg
@VishalKumar-bs3qg 3 жыл бұрын
Very good
@creativesesk3067
@creativesesk3067 Жыл бұрын
Sir oil ring me expander kon sa part hota h
@SmartstudyTricks
@SmartstudyTricks 4 жыл бұрын
कौन सी बुक से पढ़ाया है सर ये रिंग के प्रकारों को
@kuldeepmalviya6939
@kuldeepmalviya6939 4 жыл бұрын
leakage of gases for the cause by loosing piston rings and it's gone to sump that's time called\this condition is called blow by😊
@sanjayahire7326
@sanjayahire7326 2 жыл бұрын
Blo bay likeg hota he
@kuldeepmalviya6939
@kuldeepmalviya6939 2 жыл бұрын
@@sanjayahire7326 ji aapne sahi farmaaya, but piston ring k gap se koi special pipe line nhi h jo gases waha se jaaegi and by the way maine pheli line m wahi likha h vo aapne farmaaya h.🙏
@vishalmalviya4679
@vishalmalviya4679 Жыл бұрын
भाई यदि इंजन बंद है तो चारो पिस्टन किस पोजीशन में होंगे plz बताए
@Ramankumarjass
@Ramankumarjass 3 жыл бұрын
Nice sir
@narendarpatel9011
@narendarpatel9011 3 жыл бұрын
Nice bro
@Krishnabhagwan866
@Krishnabhagwan866 Жыл бұрын
Thanks😊😊😊😊😊😊
@naveendahiya5260
@naveendahiya5260 2 жыл бұрын
Sir turbo terctor m konse ring dalne chaiye
@newjobsupdate582
@newjobsupdate582 4 жыл бұрын
Super sir
@manojpradhan2642
@manojpradhan2642 4 жыл бұрын
Prashant g mere pass Kubota power tiller rt 140 di hai uska Ring piston liner nahi mil paa rhe h koi solution bataye 97 mm ka 4 ring Wala piston h
@SavitriRituvlogsR
@SavitriRituvlogsR 2 жыл бұрын
He is a teacher not a mechanic...
@devendrarajawat431
@devendrarajawat431 3 жыл бұрын
Low load running pr video bnaye plz
@rajeshraut5604
@rajeshraut5604 4 жыл бұрын
Very good information
@tameshwarporte3811
@tameshwarporte3811 3 жыл бұрын
Sir engien ko vahan se bahar nikalne ka practicle mathod batay n plese
@harishchand2881
@harishchand2881 4 жыл бұрын
nice vido
@sanjityadav343
@sanjityadav343 Жыл бұрын
👌
@anisable3280
@anisable3280 3 жыл бұрын
I like it sir
@MonishKhan-oq5yd
@MonishKhan-oq5yd 3 жыл бұрын
Sir blo ko beck compresar bolte h
@praveenshrivastava6727
@praveenshrivastava6727 4 жыл бұрын
Nice
@sudevakum1202
@sudevakum1202 4 жыл бұрын
Super sir 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
@viahalfitness3561
@viahalfitness3561 4 жыл бұрын
Sir, piston rings ki size kitni thara ki hoti h ye bato ek stander size hoti or kitni h size ye bataye plz......
@studyitiskills
@studyitiskills 4 жыл бұрын
Piston ring ki size piston ki size per depend karti hai aur piston ki size engine ke model per. Alag alag manufacturers ke liye yah alag ho sakti hai
@purushottamsingh9882
@purushottamsingh9882 3 жыл бұрын
निर्माता के अनुसार
@BokaBoka0066
@BokaBoka0066 8 ай бұрын
❤❤❤❤❤
@BokaBoka0066
@BokaBoka0066 8 ай бұрын
❤❤❤❤❤❤
@studyitiskills
@studyitiskills 8 ай бұрын
आपने वीडियो देखा और अपना अमूल्य समय देकर कमेंट किया इसके लिए बहुत बहुत धन्यवाद। आपके सुझावों से ही हमें बेहतर बनने में सहायता मिलती है।
@yogeshwakode434
@yogeshwakode434 4 жыл бұрын
धन्यवाद
@shubhamsinghrathod5043
@shubhamsinghrathod5043 3 жыл бұрын
Agar piston ring lose hoga to vo gases ko leak hone dega is leak hone wali kriya ko he blow-by kahenge
@mamtakamble1873
@mamtakamble1873 3 жыл бұрын
Thank u sir ji👍🙏
@ajadmishra9704
@ajadmishra9704 4 жыл бұрын
Thak you sirji
@mahendryadav7454
@mahendryadav7454 3 жыл бұрын
Mysuru a Kaisi gadi hai gadi start karne per high speed pakad Leti Hai kya fault ho sakta hai
@aayu2210
@aayu2210 3 жыл бұрын
What is Blow by
@sugriwkumar2233
@sugriwkumar2233 2 жыл бұрын
Sar macenic cam hame sekhana hi
@manmeetsingh3971
@manmeetsingh3971 Ай бұрын
❤❤
@gajahmada9539
@gajahmada9539 Жыл бұрын
Agar company end gap ka clearance na diya ho to?
@imranaalm9923
@imranaalm9923 3 жыл бұрын
Ha sir kala ring bich me rhta hi
@jitendratiwari4292
@jitendratiwari4292 8 ай бұрын
Ring ki piston me kaise lagay ?
@tejendrachoudhary4507
@tejendrachoudhary4507 3 жыл бұрын
Bhai Mahindra inter 4clinder ki ring kitni rupay ki aati hai
@DharmendraKumar-qp9qp
@DharmendraKumar-qp9qp 4 жыл бұрын
सर क्लच प्लेट के बारे में बताइए
@rahulkushwaha9159
@rahulkushwaha9159 3 жыл бұрын
Tata maga ka oil pump ka Kya work
@shivbhanumandloi895
@shivbhanumandloi895 4 жыл бұрын
MP Iti TO ke liye diesel mechanic trade ke liye konsi book se teyari kare
@studyitiskills
@studyitiskills 4 жыл бұрын
You will get most of the material in my videos. First of all watch my all videos and you can make notes from it. Then after you can use any objective questions book for practicing.
@harkishandhanuk7575
@harkishandhanuk7575 2 жыл бұрын
Piston ring kese fit karte Hain kar ke engine me
@nikhilgupta6218
@nikhilgupta6218 2 жыл бұрын
Sir please tell what is meaning of Blow-off
@salimkaji5746
@salimkaji5746 2 жыл бұрын
Back compression
@NavedHashmi-r2k
@NavedHashmi-r2k 4 ай бұрын
Cilindar Blok ke bareme jankari den
@studyitiskills
@studyitiskills 4 ай бұрын
kzbin.info/www/bejne/e4ncg2ugpNJ8e9ksi=q0N8IU9tYEVeLwAh
@studyitiskills
@studyitiskills 4 ай бұрын
kzbin.info/www/bejne/e4ncg2ugpNJ8e9ksi=q0N8IU9tYEVeLwAh
@abhijeetgarg5079
@abhijeetgarg5079 3 жыл бұрын
Oil halves se white smoke nikal hai ise blobby kaha jata hai
@pushpendrapanthi1558
@pushpendrapanthi1558 4 жыл бұрын
10000 k.m. ke bad ingne ki asemli kese Kare sir kya kya badle or kya check Kare sir bataai
@sameersaifi2121
@sameersaifi2121 2 жыл бұрын
Blue by kya hota ha
@DharmendraKumar-qp9qp
@DharmendraKumar-qp9qp 4 жыл бұрын
Spark plack kya hai
@bapimajumdar5690
@bapimajumdar5690 2 жыл бұрын
Peaggio ape, model 2012extra LD, standard size ring available in India.
@mukundthorwat1142
@mukundthorwat1142 Жыл бұрын
Yes available
@LAKSHMANKUMAR-zy6nv
@LAKSHMANKUMAR-zy6nv 3 жыл бұрын
❤️👍🙏🙏🙏
@GulshanKumar-rm1hl
@GulshanKumar-rm1hl 4 жыл бұрын
3 ring ko janna h First ring ko ky bolte h
@yogeshshivale4731
@yogeshshivale4731 Жыл бұрын
Blo by gas Kay hota हे
@devendrarajawat431
@devendrarajawat431 3 жыл бұрын
Crankcase defelection pr also make video sir
@joysarkar9763
@joysarkar9763 4 жыл бұрын
Sir kya app r/AC trade ke ho
@studyitiskills
@studyitiskills 4 жыл бұрын
Nahi... Diesel Mechanic
@sanasana9371
@sanasana9371 3 жыл бұрын
Sayyd pataka ki niyam sham ko pata karna hai kitni meeting time kitne
@studyitiskills
@studyitiskills 3 жыл бұрын
आपका comment स्पष्ट नहीं है।
@DharmendraKumar-qp9qp
@DharmendraKumar-qp9qp 4 жыл бұрын
क्लच प्लेट क्या है क्लच प्लेट में इंपोर्टेंट
@vipinkumarsaroj6413
@vipinkumarsaroj6413 3 жыл бұрын
Sir clutchplet presur plet set karne ka tarika Bata dijiye Please kitne mm me finger set hota hai,,
@heerakumar4409
@heerakumar4409 3 жыл бұрын
Hii
@pratapray8415
@pratapray8415 3 жыл бұрын
Sir ji pdf dal dete
@bhorikpal5552
@bhorikpal5552 4 жыл бұрын
Sir main heading English me likhiye please
@studyitiskills
@studyitiskills 4 жыл бұрын
ok
@ajadmishra9704
@ajadmishra9704 4 жыл бұрын
🙏🙏🙏🙏
@sanasana9371
@sanasana9371 3 жыл бұрын
Sayyd
@dineshSINGH-rg8gs
@dineshSINGH-rg8gs 3 жыл бұрын
Bolobay bak compresar
@AshokKumar-px9ho
@AshokKumar-px9ho 4 жыл бұрын
Jo engine Ka blo paip hota he use adhik matra me smoke Aaya he
@Jhfhknhvffhjk
@Jhfhknhvffhjk Жыл бұрын
You r very boaring person apni jan dedo bhai
@MukeahpalPal
@MukeahpalPal 4 жыл бұрын
Good Bhai ji
@mahendryadav7454
@mahendryadav7454 3 жыл бұрын
Very good
@devendrarajawat431
@devendrarajawat431 3 жыл бұрын
Crankcase explosion pr video bnao sir
@Kishanbhardwaj2602
@Kishanbhardwaj2602 4 жыл бұрын
सर क्लच असेंबली के बारे में बताइए
@assamfarmingpoint1611
@assamfarmingpoint1611 2 жыл бұрын
kzbin.info/www/bejne/mXOYpZ2be7Rqn9E
@bahadursinghmohne2244
@bahadursinghmohne2244 Ай бұрын
Super sir
Piston Pin | Gudgeon Pin | Piston Pin explained in hindi |
4:44
Study ITI Skills
Рет қаралды 29 М.
PISTON | FUNCTION, MATERIAL, PROPERTIES & PARTS OF PISTON in Hindi
12:44
Study ITI Skills
Рет қаралды 41 М.
小路飞还不知道他把路飞给擦没有了 #路飞#海贼王
00:32
路飞与唐舞桐
Рет қаралды 79 МЛН
Why Do Engines Need 3 Piston Rings? Explained
12:09
The Engineers Post
Рет қаралды 667 М.
Piston Rings Hindi || What is Piston Rings || Piston Rings kya hote hai
7:00
Gear Institute Mechanical Engineering Videos
Рет қаралды 537 М.
How to check Cylinder liner, Piston, and Piston Ring (LPR) of an Engine.
8:18
Rb Etech.(Rb Engine Tech)
Рет қаралды 50 М.
Piston || Function, Material, Properties & Parts of Piston
6:25
ANUNIVERSE 22
Рет қаралды 8 М.