pl162t from v1 v2 to v3 version , video 1-2

part 2: • pl162t how to change t...
• pl162t v3 low tension,...
per aggiornare Bianca da V1-V2 a V3 bisogna sostituire
l'elettrovalvola caffè (la grande)
l' LCC
cavo elettrico
per avere questi componenti bisogna ordinare il KIT
4000062 kit 220-240v
4000061 kit 120v
bisogna utilizzare il cavo per collegare l'elettrovalvola low flow alla scheda elettronica.
con la valvola, l'lcc e il cavo si puo' procedere all'aggiornamento come nel video.
il low flow e’ un riduttore di pressione , agisce sulla elettrovalvola collocata dopo la pompa
preinfusione agisce sulla pompa accendendola e spegnendola.
Quando la pompa e’ off non vi e’ spinta nel boiler caffe’
Quando la pompa e’ on e il tasto on-off lampeggia durante lo shot significa che vi e’ spinta di acqua, ma questa e’ in quantita’ ridotta.
Quando la pompa e’ on e il tasto on-off e’ acceso fisso durante lo shot significa che vi e’ spinta di acqua a pieno flusso

[@roady43]

The V2 LCC recently was available for less than 100.- EURO. In june 2022 the V3 kit did cost more than 350.- up to 470.- EURO depending on the reseller. This does not make sense to do the upgrade, because the advantages are not worth the price. Espresso will not be better than with the LCC V2, one can handle manually everything to the same effect with the paddle. As long there is no possibility like programming the Bianca wireless with an app, it is not very exciting to upgrade imho. Price seems coming down, so maybe if a service is necessary anyway, the effort is worth it.

[@muratozt]

I tested it with scace device. It definitely works better

[@LowsHand]

Nice job Lelit! I'm just hoping to get V4 with APP connection and programming...

[@AlexeiWatson]

yes - major want.

[@vorna6664]

So I hope with V4 there gonna be a temperature + pressure gauge on the e61.

[@AlexeiWatson]

Have recently got a Bianca V3. What would be amazing would be a replacement LCC that has wifi/app connectivity. I'd love to be able to have pre-sets or automate the settings like temp/pre-infusion etc. My wife just likes to pull the lever for the same grind every morning, where I like to experiment with flow control etc.

[@svenholler1682]

this would be awesome

[@lucasliu7685]

Great video, thanks for sharing! Does the upgrade also support the standby mode and brew temperature compensation?

[@lelitinsider2977]

the temperature compensation is not related to the V3, you can do it in the v0-v1-v2 kzbin.info/www/bejne/b5qQlKJ6gLyNgqM

[@lucasliu7685]

@@lelitinsider2977 does the upgrade support v3 the standby mode (after 30 mins idle time)?

[@lelitinsider2977]

@@lucasliu7685the upgrade does not support the standby

[@paul--b]

Which thread locker is recommended?

[@Tim_E88]

Hi Mauro, i have a V2 Bianca. Can you tell me where i can buy the 4000062 kit for the 220V-Version? And what do you use to seal the threads? This blue liquid.

[@lelitinsider2977]

you have to contact your reseller !

[@christophkohler8607]

Hi Thanks for the great video ;-) which liquid seal do you use?

[@lelitinsider2977]

we use loxeal or loctite

[@Wides911]

@@lelitinsider2977 ok thanks but which loxeal 58-11 or loctite 5400 or a completely different one?

[@lelitinsider2977]

@@Wides911 in the factory we use LOXEAL 55-03 or 85-86

[@christophkohler8607]

@@lelitinsider2977 is loxeal 58-11 or loctite 5400 also suitable or recommended for use? Can I also use Teflon tape (what properties should I look out for when using Teflon tape?

[@arturbibik4886]

[time 13:33] What kind of white grease/sealant is this?

[@lelitinsider2977]

molikote nsf grease

[@lenso010]

does v3 got faster heating process vs v2 ? I'm not interested in fancy other futures of the lelit v3.

[@lelitinsider2977]

the v3 version is faster

[@theJobtube]

@@lelitinsider2977 Is that also a hardware update? Or just software?

[@MrMuckiMicki-jo3lh]

@@lelitinsider2977 Ja, aber mit sehr hohem Energieaufwand beim Einschalten, am Ende verbraucht sie genau so viel Energie wie die vorhergehenden Varianten, denn die schnellere Aufheizzeit zieht mehr Strom.

[@leonwch]

Hey, do you know if the Lelit Pl81 also have/will get LCC1.14

[@lelitinsider2977]

1.14 is the 2022 software

[@leonwch]

@@lelitinsider2977 Also for the Grace? Thank you very much! :)

[@lelitinsider2977]

@@leonwch yes

[@abbasmuhanna]

How it cost price only parts for V3?

[@lelitinsider2977]

hi, you have to contact your reseller

[@abbasmuhanna]

Just need the price no need to contact reseller?

[@lelitinsider2977]

@@abbasmuhanna it depends to the importer