Plain Scales Problem 1

[@mnlnSngsn]

Who else came here for their assignment

[@ankitbanerjee925]

Me

[@vivekgaming6091]

I am 😅

[@shiva-rp2hx]

Me🤣

[@_adheeb.]

Me

[@technologicalaman]

Me

[@rajamukherjee1650]

Tomorrow is my semester exam and your videos really helped me to get rid off various confusions....Thank you so much sir!

[@borderlinefancy]

IT WAS VERY HELPFUL!! Since our teacher at school does nothing we basically have to teach ourselves, Thank you for the guidance!

[@ManasPatnaikofficial]

Hi Sanjal... Thanks for appreciating my work and do spread a word about this channel among your friends and classmates so that they can also benefit.

[@nahidroohi5922]

Very good

[@SumitKumar-xi7wf]

Nice

[@nabeelnavab1282]

@@ManasPatnaikofficial sure

[@rahulrana8570]

Government college?

[@652sriram.r6]

i am studying in jntuh,none of our teachers seed in teaching us properly.u are just awesome.

[@ManasPatnaikofficial]

All the best Ram.....

[@pinkfleur3721]

You are an amazing teacher....You cleared my doubts of engineering graphics !!

[@yourgranpa88]

Sir you are a real legend at my government diploma college teacheras just came for passing time 😭

[@mr.indian9913]

Nagpur ka kya

[@rishavtewary6239]

Thank you very much sir for your wonderful demonstrations. I have made your channel in my colleges that most of the students are now completely dependent on your videos now and each one of them compulsorily have your videos on their devices.... So thank you sir, else we couldn't have understand a single topic. :) And a very Happy Teacher's Day sir

[@ManasPatnaikofficial]

Thats so nice of u Rishav...All the best man........

[@day_dreamer_dd5344]

Tomorrow is my supply exam...but due to pandamic we didn't take any class regarding to drawing...the way you teach clearly is better than any class 💗👍🏻

[@M_S_K01448]

Construct a plane scale of RF 1:40 to show meters and decimeters and long enough to measure upto 5 m. Mark on the scale a distance representing 4.3 m.

[@rachitkapoor6823]

I thought I was screwed until I saw your video. Thank you so much.

[@ManasPatnaikofficial]

Thanks a lot Rachit for appreciating the content... Do check out Engineering Mechanics also on my channel page... All the best...Have a great time and CHEERS...

[@sreelokesheranki8184]

Thanks for keeping the video sir I'm cse 1st .yr student and for mid exams for ENGINEERING DRAWING it is so helpful for me and very thanks sir

[@ManasPatnaikofficial]

You are welcome and do share with your friends also....

[@sreelokesheranki8184]

Yes I Had Shared sir

[@massjayanth6368]

@@sreelokesheranki8184 bro I need ur help

[@manasameesala9852]

Thank you.... it's just because of you that we gathered knowledge regarding this subject.

[@lavanyachitturi2232]

The way you explained was soo easy for me to understand thnkyou bro❤

[@ManasPatnaikofficial]

Thank u Lavanya 😀Do share this channel and its playlist with your friends. 1. Engineering Drawing Playlist (ENGLISH): kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing Playlist (HINDI): kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics Playlist (OLD): kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Engineering Mechanics Playlist (NEW 2023-2024): kzbin.info/aero/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP 5. Mechanics of Solids Playlist: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 6. Theory of Machines / KOM / DOM Playlist: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 7. AUTOCAD Playlist: kzbin.info/aero/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G 8. Machine Drawing Playlist: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics. Second Channel for Hindi Audience: @btechplus Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc

[@ajmalfarooq159]

Too accurate way of teaching. I understood it easily. Regards Er.Ajmal

[@ManasPatnaikofficial]

+Ajmal Farooq Thanks Ajmal.... Do watch all the content thats available on scales and other topics.... And also let your friends know about this channel so that they can also benefit..... All the best

[@aldairzettewachenje9353]

I've got your attention all way from Kenya "guy". Nice work and really appreciate it.Waiting for more.

[@ManasPatnaikofficial]

Engineering Drawing | Engineering Graphics |: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS

[@venugopalbheema2912]

Ur lecture helped me I passed my E.D xam after 3 years tq boss😘😘😘😍

[@WaseemAkram-si2po]

Thank you sir 🙂 You made my preparation very easy .

[@ravisaw2221]

Tusi great ho sir Teacher kuchh v dhang se nhi batate h Bahut problem hoti h class me

[@Kinuthiamugi]

Thank you very much for your training materials. I have always referred my students to your work. I wanted to know software you use to develop animations of the materials you use to train.

[@ManasPatnaikofficial]

I am glad you liked it. Well i use MS Powerpoint for animating all of this.

[@nirmalyasarkar9498]

You are just awesome sir..... I appreciate your demonstration.... I wish that i will have a tutor like u

[@ManasPatnaikofficial]

Thanks for the appreciation Nirmalya..... Its really motivating. All the best...... And do share this with your friends and juniors.

[@nirmalyasarkar9498]

Ohk sir... I will

[@srinadh7217]

Thank you so much Manas sir... Because of you I cleared my one and only backlog subject Engineering drawing ...Tnx Sir

[@ManasPatnaikofficial]

May God bless u.... I am sure you will do well in life as well..... Time to enjoy.....

[@srinadh7217]

I scored 80 marks out off 100

[@yemeemaswetha4809]

Sir..! U r our saviour. I owe to u sir. Its really simple to understand. I'm not comparing u with others but you are the best . 🤗❤

[@life_iitism]

My professor shared your video link, it was indeed very helpful!

[@godabapawanteja8603]

Patnaik sir.... Thank you... For everything Wht u teach me in this online system... I passed my Ed because of you.. Thank you 😘😘😘

[@ManasPatnaikofficial]

Thanks Godaba Pawanteja........ Keep learning, all the best and do spread a word about this channel with your friends and classmates so that they can also benefit....

[@kunchalavenkatateja1862]

Im here for tomorrow morning exam....

[@dl4810]

Sir maanl lo ki hmko 3.2 decimeter scale pe show krna hai toh kaise kare..aapne kisis v vdo mai scale show nhi kiya hai...help me sir plze

[@pujithaannadi8063]

Sir ur teaching is awesome sir

[@Grade6Ruby]

GOOD

[@nomads6368]

Thank you sir today I learnt about plain scale Love from pakistan, Peshawar

[@prashantrao8342]

fatt ja comments me

[@lizithonger3891]

Thankyou sir i learnt nicely from your explanation. 😊

[@ManasPatnaikofficial]

All the best and do share this channel with your friends and classmates, so that they can also benefit. Download the Manas Patnaik app now: bit.ly/3wMRxoc

[@ajayisetemi4322]

This video rally helped me a lot.

[@katamanenirohith6482]

what angle does you taken above and below

[@NeerajKumar-kf8vd]

Sir which software you are using for teching

[@manojitcreation1303]

*Sir please civil engineering drawing (building construction) k liye video banaiye*

[@ManasPatnaikofficial]

sure

[@nahidroohi5922]

I am waiting

[@syed_wahid]

Hi

[@mradul2474]

Ek number chaap diya yaar..... Thanks 🙏

[@vamshidarreddyneerudu7950]

Really nice sir it helped me a lot to understand

[@MaiOrMeriSadakk]

jo line ham niche draw karte hai equal arc banane ke liye woh kya kisi khass angle pe hoti hai yah kisi bhi angle par ho sakti hai

[@ManasPatnaikofficial]

Kisi pe angle pe draw kar sakte hai

[@mirgowhar5222]

Sir which software you use for teaching

[@athiest_358]

Sir you do best work👍👍👍👍

[@globallybynilesh]

Kya yaha scale wala questions graph paper mei banana hota hh jo ED ki copy ke front mei ata h ya nai

[@arpitnamdev7031]

Sir I have problem for you. Draw a suitable scale for the following detail's are- A passengers train cover a distance of 120 km in 4hours the scale should show 1 min = 1hour and mark a distance of 36 min on it. (Rf= 1:2lakhs). Plss give the ans of this question

[@martawahge4791]

Can you show me this question? Draw a line of 8 length which represents 24 miles the equal? Please help me sir

[@venuyadav3470]

thank uh sir😇

[@pradeepparmar320]

Ur saving my time for understanding this thanku sir

[@ManasPatnaikofficial]

All the best. 1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q My AMAZON Store - For all you students. www.amazon.in/shop/manaspatnaik

[@KajalChirodiya]

Sir 2 problem?

[@athiest_358]

It's so helpful for me , so thank you so much sir 🙏🙏🙏

[@gidiemami]

Sir i have a questions. Problem 1- construct a scale of 1 isto 8, show dm and cm and long enough to measure upto 1m . Show a length of 7.5 dm , 5.8 dm. on the scale.

[@gidiemami]

Please sir i want the video on this question.

[@mehrajunnisa1230]

Y did you divide up to 5 equl parts??

[@engineeringandpoetry]

Because max. Distance measure upto 5 decimetres given in question that is the reason. 1decimetre = 10 centimetres

[@meghanapandi3259]

Thanks a lot sir really u r having an genius power of explaining Take a bow to ur Explanation ❤️👏 learned each and every thing frm ur channel it's been really a helpful for my Tomorrow's Exam god bless u with more and more knowledge and keep sharing Ur knowledge like this only in the future too🥰

[@Ayushk_]

30 min. Me paper hai mera 🙂

[@skh934]

hi sir .. thank you very much for ur video.. tomorrow is my exam..u helped me alot . ... I have a doubt..if maximum length is in 5.5 m then in how many parts we should divide a line... shall we divide the line in 6 parts ??

[@ManasPatnaikofficial]

Maximum length is always an Integer....Dont worry.......

[@nallaballesreedharreddy2469]

Thank you very much sir. I have a small doubt sir.. why should we mark zero at the end of the first division and 1,2,3,4. Instead of that we can mark 1,2,3,4,5 na. So that 5 dm long. Plz clarify this big doubt I have. Thank you..

[@ZsSkayr1]

Thank you

[@challagondavineeth9109]

Sir if we need to mark 5 decimeters.should we divide the 12.5 cm line into 5 equal parts or 6 equal parts

[@rajeshbehera785]

Sir Supposed i have a question tha is 'construct a diagonal scale of r.f.=1/6250 to read upto 1km and to read meters on it.show a length of 653m on it. So in this question how many part i will divide it??

[@ManasPatnaikofficial]

+RAJESH BEHERA I believe the max length is not given.....take an assumption say 1000 mts........then divisions in 3 steps i.e 10-10-10...... We have selected 1000 because it is more than the length 653 that is to be shown after the scale is prepared.....

[@saniaarya324]

It's so useful for us .... thanks and make video for all students who's need to this.... But I have objections that in screen how u write 10,5 in the side of CM which you divided in 10 parts then how to write 10,5

[@pavansharma1091]

Nice to see the latest version of this message

[@jagguff369]

Sir... Plz make more problems in this concepts

[@Vanshdeep5620]

Sir how much lenghth line is drawn in step 1

[@zaidalikhan5318]

Superb teaching, i like your fluent English

[@ManasPatnaikofficial]

Thanks a lot Zaid for appreciating the content... Do check out Engineering Mechanics also on my channel page... All the best...Have a great time and CHEERS...

[@upagnamaganti8592]

Sir thank u for uploading videos.i have successfully cleared engineering drawing by listening to your classes.

[@ManasPatnaikofficial]

Awesome 👏✊👍 Keep it up..... Stay blessed ☺👼

[@upagnamaganti8592]

@@ManasPatnaikofficial thank you sir

[@tajbirsingh942]

is there any restriction on height of scale like you have drawn 1cm can it be of 3 or 4 cm?

[@ManasPatnaikofficial]

Yes you can do that

[@tusharkuldeep4530]

The distance between vadodara & surat is 130km. A train covers this distance in 2.5 hours. Construct a plain scale to measure time upto a single minute. The rf of the scale is 1/260000. Find the distance covered by the train in 45 minutes. Please make a video on this one... And how to solve it.

[@sandeshpokhrel4727]

make some video related to machine drawing and orthographic projection machine drawing includes screw jack, universal coupling,staffing box,knuckle join,centering cone etc

[@ManasPatnaikofficial]

sure man....that will happen in due course....

[@subhamkumarsingh5236]

amazing video. All my doubts are cleared

[@dhamodharreddyguthikonda2260]

why you took 1cm for inclined line? can we took any number ?

[@sampathvaddiparthi5715]

Ur lectures are simple superb

[@ManasPatnaikofficial]

Sampath......Thanks for appreciating my work.... All the best in life And do recommend this channel to your friends and classmates so that they can also benefit... Cheers....

[@solankimeet61]

Manas sir, can pls upload some videos on Machine Drawing which includes information related to screw thread, types of thread, nut, types of nuts, Hexagonal nut,etc.... Pls sir it's a request and I hope I will get a positive response and sir pls upload as early as possible...... 🙏🙏

[@ManasPatnaikofficial]

sure meet that will happen in due course...

[@solankimeet61]

Thank you sir

[@mannavageethakrishna9389]

sir,if we get length of a scale in fraction then what should I do? ex: RF of a scale is 1/400 to show meters on scale long enough up to 60 meters.show 44 meters on scale?

[@ManasPatnaikofficial]

The problem u have asked for...Its LOS is working out as 15 cms... This is pretty easy

[@mannavageethakrishna9389]

+Manas Patnaik I was confused that both of them are in meters ! thank you sir for your explanation

[@thodusuravinder]

Sir,why 0 should be placed at the end of the first main division

[@thodusuravinder]

Sir, I want ANS

[@owaisplays7561]

Sir can u please solve these problem its urgent my exams is coming .So,plz solve these sums .Sum :1 the given r.f is 1: 50000 draw a linear scale there primary divison are shown at an interval of 1 km and secondary divison at an interval of 0.5km ??????? with contruction. Sum 2:the given r.f is 1: 50 .Draw a linear scale were each primary divison shows 1 feet ????? with contruction ......... plzzzzzzz solve ............

[@sohailz8789]

Thank u I'll give my online exam with the help of ur vid🤣✌️

[@Vicky-wm7we]

A good plat form to learn

[@jethin7]

2:52 Why he took a radi of 1cm why not any other radi? should we have take only 1cm for every problem

[@ManasPatnaikofficial]

Hi Jethin.....As you can see here we had to go for 5 divisions only, so i took 5 points spaced 1 cm apart. Suppose you have to go for 10 divisions, in that case marking 10 points spaced 1 cm apart wont be an efficient option, as it would occupy a lot of space. Thats why for 10 divisions, you can go with 10 points spaced 0.5 cm apart. Hope that this clears your doubt. All the best and do share this channel with your friends and classmates, so that they can also benefit. Download the Manas Patnaik app now: bit.ly/3wMRxoc

[@jethin7]

@@ManasPatnaikofficial thank you sir

[@adityarajsinghrathor]

Dhanyawad Guruji 🙏🙏🙏🙏

[@ManasPatnaikofficial]

Khush raho......Exam kab se hai waise ? 😀Do share this channel and its playlist with your friends. 1. Engineering Drawing Playlist (ENGLISH): kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing Playlist (HINDI): kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics Playlist (OLD): kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Engineering Mechanics Playlist (NEW 2023-2024): kzbin.info/aero/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP 5. Mechanics of Solids Playlist: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 6. Theory of Machines / KOM / DOM Playlist: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 7. AUTOCAD Playlist: kzbin.info/aero/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G 8. Machine Drawing Playlist: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics. Second Channel for Hindi Audience: @btechplus Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc

[@viveksaxena7376]

me jab first year tha puri playlist dekh gyaa thaa ppr dena hopefully passed the exam thanks manas

[@poojapandey4508]

THANKS A LOT MANAS SIR.. KEEP UPLOADING SUCH VIDEOS ...

[@ManasPatnaikofficial]

Thanks Pooja for the appreciation All the best... And do let your friends know about this channel (regarding drawing and mechanics) so that you all can benefit...

[@trulycinematic.2005]

Perfectly explained Thanks sir

[@nicholasmichire8341]

Thanks for your I have an exam to do tomorrow an I was stranded

[@grishmaraj3264]

can u plz take up this quetion :construct a scale of 1.5cm=1dm to read upto 1meter and show on it a lenght of 0.6 meter .plzzzzz as soon as possible

[@ManasPatnaikofficial]

That can be done....... Add me on fb messenger and i shall send u the pic of this problem's solution...

[@SuhaibKhan-kn2gx]

hlo sir can u tell me how can we identify a first angle or third angle projection

[@Grade6Ruby]

THANKS😍🤩🤑😇

[@sanskritisingh7472]

Extremely helpful video!!

[@mayankpriyedershi9434]

If the Length of the Scale is 5DM how can I show a length of 7.5 DM or whatever ?

[@rovinhood1007]

Sir please upload video on lettering

[@ManasPatnaikofficial]

sure Mr. Avenger

[@saumyayadav8596]

How did you know that there will be 5 divisions of 12.5??

[@tapubiswas2259]

A 4cm long line on a map represents a 1.5m length.Determine the R.F and construct a plain scale long enough to measure up to 6m. Show on it a length of 4.6m. My question how to solve ??? Plz help me

[@adityakori70]

Thank you for explaining 🥰🥰

[@mohitrishi401]

If we have to show 3.4 dec. Then where would we point ?

[@mohitrishi401]

On which line

[@ganeshcristiano3877]

A big thumbs up from my heart...

[@bharathkuna8283]

Ganesh cristiano raaaaai

[@ashokpal4971]

Const. A retrograde vernier scale to measure upto 4m. A distance of 1m is shown by 4cm long line .mark a distance of 2.31m on this scale . Plzz tell how to solve this ques...

[@gopichandEEE]

Sir arc ala cut cheyali 10 parts how?

[@badhesuresh8244]

I have a doubt in this one some of the problems. you can divided into 9 equal parts but measure upto 6.8. how you can take this

[@aashutoshtiwari8956]

Manas Sir I wanna learn all methods for drawing an ellipse please can you upload a video for it??

[@ManasPatnaikofficial]

Aashu...Its already there... Here is the link..Watch them all: kzbin.info/www/bejne/gpPZhoyceJajbrM

[@ARGhazi]

Nice explanation

[@divyasree8099]

sir can you please make videos on vernier scales

[@ManasPatnaikofficial]

Ya sure Divya...Your request has been noted...Cannot promise when but i will definitely upload......

[@rohithmahesh3080]

tq so much I became fan of your vedios sir

[@ManasPatnaikofficial]

Thanks Rohith for appreciating my work... Do encourage your friends also to subscribe and learn from this channel..... All the best in life....

[@rohithmahesh3080]

Tq brother

[@funwave99]

Draw a scale of when 2m is equal to 5cm then show a distance of 4.08m and 3m 8dm 3cm on this scale . Sir please tell me how to draw this question

[@santoshvishawkarm7640]

awesome sir and great explaining

[@SumitKumar-xi7wf]

It was very useful to awesome looking question attempt