This is such a great idea that it's hard to believe the planer manufacturers haven't actually released their own attachments for this or designed the planers to support it. Drastically more efficient than the router-based approach that so many people seem to be using. Thanks for sharing!
@j-woodworking95732 жыл бұрын
Thanks for watching sir.
@gilpelletier28212 жыл бұрын
Can I save this or get the plans for it
@JohnPatersonAu2 жыл бұрын
I agree, but I think adjusting the depth would be easier with a router sled.
@blakeshedd5354 Жыл бұрын
@@JohnPatersonAu That was my thought too. The only ways to adjust the depth with this is minor adjustments with the knob and larger adjustments with shims. Router seems easier, though slower.
@davidelliott5843 Жыл бұрын
@@blakeshedd5354Shims to raise the work-piece should be easy enough with standard aluminium sheet. Cut small plates or discs for the corners in 1mm, 2mm, 3mm, etc.
@mdevidograndpacificlumbera15393 жыл бұрын
No matter how long something has been around, and people think that every facet has been figured out- there is always something else to invent. Genius work my dude
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@russellpeterson92163 жыл бұрын
I am surprised this dude has all of his fingers!
@j-woodworking95733 жыл бұрын
Sorry about that. I'll be careful. Thanks for watching sir.
@carterscustomrods2 жыл бұрын
🤣 🤣 🤣
@shawnmann94912 жыл бұрын
I had some concerns as well, but this idea is pure genius IMHO😎.
@carterscustomrods2 жыл бұрын
@@shawnmann9491 undoubtedly! I'm in the process now of doing this with linear rods and bearings. The edge guide holes and brackets are perfectly positioned for it. I'm actually putting it on a base so that it lines up on my bench and is held in place with dogs I'm putting on the bottom. Now it'll just be a matter of depth settings and boom... let the shavings begin!!
@shawnmann94912 жыл бұрын
@@carterscustomrods . Very good info Sir! So you are mounting it upside down🧐? I was going to investigate his depicted planer, and will look into your model as well. I’d love to see a picture of your finished setup! Happy New Year to You!
@user-um9by6bx4vАй бұрын
Удачная конструкция рейсмуса. Браво. За аккуратность. Необходимо сделать регулировку платформы для изменения толщины доски. Можно сделать винтовую регулировку ножек платформы в пределах 30 мм. Это реально при аккуратность мастера. Станет универсальным приспособлением.
@anthonyjordan29222 жыл бұрын
Wow, I have one of those planers collecting dust in my workshop that now will have a new purpose. Thanks for posting this!
@diyer95272 жыл бұрын
I have a hand planer like yours. I have had it for close to 25 years. Lost the manual. Never new how to properly aline the blades until I watched your video. Thaks for posting. Love your videos.
@valentinbonelli5199 ай бұрын
This is a pretty solid little workbench. While once you figure out how it comes together, it is physically Easy to assemble kzbin.infoUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh by yourself. But the diagrams explaining the steps are really pretty bad. I could not get the handle pins in all the way despite multiple attempts, so I just used a screw I had on hand for the 2nd handle. I could not get the first pin in further or pull it back out. You are supposed to hammer it in, but I had no leverage and the handle is plastic and I did not want to risk breaking it. I will get a lot of use out of the bench because of the convenient size and height. It does fold up nicely for storage. They even explain how to fold it so you don't get pinched...that is important!
@2nd-place Жыл бұрын
I came across this looking for something else but this is exactly what I need for a big project I'm planning for this winter. Thanks!
@Splatterpunk_OldNewYork3 жыл бұрын
YES!!! Now I can finally make that live edge wood wall shelf for my best friend. His wife will be so happy.
@j-woodworking95733 жыл бұрын
Pleased to hear that. Thanks for watching sir.
@myRefuge37103 жыл бұрын
That's what she said.
@SomeDumUsrName3 жыл бұрын
lmao! That's slick.
@benm59133 жыл бұрын
This makes so much more sense than a router version. Super smart.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@bobs12andahalf23 жыл бұрын
Yep, might have to give this a try. Four days with a router Vs 5 minutes with a planer 🤣
@Festoos3 жыл бұрын
The router version is gonna still be much better for end grain or going against the grain of a peice
@renem81303 жыл бұрын
@@Festoos that's what I was thinking. I have a table top to even out, but I have a bread board glued on already. It won't go well with a planer huh?
@Festoos3 жыл бұрын
@@renem8130 yeah because of the variation in grain direction you should definitely go with the router, remember to have sacrificial prices of wood on the entrance and exit end of your path with the router tho to make sure your table top has 0 tear out :)
@mattperryman19482 жыл бұрын
Excellent! I've been wanting a planer, but can't afford the benchtop kind. However, I did buy an electric hand planer similar to that, but I haven't had much success with it. This, my friend, is a game changer! Great idea, thanks for sharing!
@j-woodworking95732 жыл бұрын
Thanks for watching sir.
@davidelliott5843 Жыл бұрын
Portable planers cannot flatten a timber slab, so this method is the best way to go. You also need shims for each corner of the slab. to raise it in 1mm steps. 4 x 1mm, 4 x 2mm 4 x 3mm, etc. Make a cut with 1mm shims. Reset the job with 2mm shims, make another cut and so on.
@rolandgdean3 жыл бұрын
Oh my goodness J! This is genius and WAY better than doing this with a router.
@j-woodworking95733 жыл бұрын
I'm happy to have made this idea. Thanks friend.
@dipaklicbiswas3 жыл бұрын
@@j-woodworking9573 uuuu
@bruce41302 жыл бұрын
Funny, but my father did a similar thing , with castor wheels, with an electric planer 35 years ago! Too bad there was no KZbin back then! Great video 😱😂👍
@valterleao67953 жыл бұрын
Fabuloso, esse dispositivo fico muito funcional, olha...., estou pensando em fazer um deste! Abraço aqui do Brasil 🇧🇷
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@righrashepistle45543 жыл бұрын
you always amaze me with your brilliant ideas!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@powerofgoofy3 жыл бұрын
This is brilliant. I did the same trick with a router but this is way better! Thank you for sharing!!!!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@billgiles32613 жыл бұрын
‘I flattened a bench top with a router but as you say this seems way easier. I think that it is important to have sharp blades in the plane. Also I fancy that his method of mounting the plane on the rails was more complicated than necessary.
@ririsudj87242 жыл бұрын
@@billgiles3261 ..ㅈ
@duelette3 жыл бұрын
You definitely are a thinker! But watching you on that table saw after losing the tip of one of my fingers made me sweat! Good job in and the best.
@j-woodworking95733 жыл бұрын
Sorry to hear that. I'll be careful sir.
@prabhat47003 жыл бұрын
Sorry to hear about your finger. How deep was the cut? Did you lose the part of finger completely?
@mveeden2 жыл бұрын
Man, same sweaty fingers here too. Cut 3 of my fingers myself a few months back & watching it get so close, skipped a lot of the video.
@markfisher79622 жыл бұрын
Yeah, watching that table saw work @ double time was er... triggering. The splitter looked like the saw blade in some of the shots as well.
@Adelphos34 Жыл бұрын
Totally agree, my dude is terrifying to watch on the table saw. Seriously brother, the reach overs, narrow pushes on finger tips with angled cuts, insanely dangerous.
@ziggybombers15632 жыл бұрын
Was trying to do something like that for a long time, in the end I got 2 HGR20 rails and made a router sled. Absolutely love what you did 😃👍⭐️⭐️⭐️⭐️⭐️⭐️.
@j-woodworking95732 жыл бұрын
Thanks for watching sir.
@samuelluria4744 Жыл бұрын
I always wonder why so many people make router sleds, when planer sleds make so much sense....🤷🏻♂️
@andyhello232 жыл бұрын
That is amazing ingenuity. Very well done, amazing how you used the electric hand planer.
@elusivemite Жыл бұрын
Never seen it done with a planer. Made a few router sleds for surfacing in the past. Nice work
@gilbertoe.30473 жыл бұрын
Excelente ideia , genial , parabéns belo trabalho .
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@nickshutte8369 Жыл бұрын
Brilliant idea to turn this simple hand planer into a jointing and thicknessing planer!
@SirFency Жыл бұрын
Love it. It's like a router jig but with a hand planer instead. Nice.
@dslrcam71103 жыл бұрын
자동대패를 살까했는데 이 영상을 보니 망설여 지네요. 정말 좋은 아이디어입니다.
@j-woodworking95733 жыл бұрын
자동대패는 필요합니다 적당한 사이즈로 구매하시고, 가공이 않되는 특별히 큰 사이즈를 이 지그로 가공하면 됩니다 감사합니다
@jashr1jashr143 жыл бұрын
Взял на заметку! Спасибо, хорошая идея и исполнение.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@manoranjansardar24093 жыл бұрын
@@j-woodworking9573 igsrp
@manoranjansardar24093 жыл бұрын
@@j-woodworking9573 wst
@ericne1s0n Жыл бұрын
Beautiful work. Thank you for the inspiration. Time to get to work on my own design for my needs. Cheers.
@pgoessnitzer Жыл бұрын
This is a brilliant idea! Thank you for sharing this. Greetings from Oregon!
@carterscustomrods2 жыл бұрын
Did this with the Bosch 2632 and 20mm linear rods (I originally did it with V-slot and uhmw backed guides, but it would wobble). The linear rods keep it locked parallel, and can be rigged for all sorts of setup design, but they're $$$ 😞 . But if you get the right diameter, a shorter length can be used, and just require more adjustment.
@andresvaldevit3692 Жыл бұрын
This can come very handy to me that I’m just starting woodworking as a side hobby and I already own an electric hand planner, matter of fact I own this exact model, Makita I believe? Thank you, love your channel
@jucimarferreira3601 Жыл бұрын
Goste muito que projeto éselete parabéns meu amigo
@ceciliomonzon32793 жыл бұрын
You just saved my a lot of money!! Brilliant idea, gonna give it a try for sure. Thank you for sharing.
@j-woodworking95733 жыл бұрын
Happy to hear that. Thanks for watching sir.
@marciobernardo89853 жыл бұрын
Parabéns pelo magnífico projeto! É a primeira vez que vejo um projeto como o seu. Muito obrigado por compartilhar as suas ideias.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@user-tv1lc7ig9t2 жыл бұрын
수압대패만큼 만족도가 나오는지는 모르겠지만 부상위험은 확실히 적을듯요 따봉입니다! 놀랍네요 ㅋ 안그래도 전동대패로 판재가공하는 방법 없나 고민중 이었는데, 저도 좀 더 고민 해봐야겠어요 ㅎㅎ
@gusandbutton3 жыл бұрын
Very clever. Thanks for this. That said, your safety protocols need some work. I really struggled to watch you with that table saw.
@j-woodworking95733 жыл бұрын
Sorry about that. I'll be careful. Thanks for watching sir.
@Deathend3 жыл бұрын
I was on the fence about getting an electric hand planer after my first failed project and don't have the room for a full sized planer. Thank you so much for this video! I feel dumb for asking but what's the clear stuff you use to apply the block to the back of the hand planer? Silicone caulking?
@j-woodworking95733 жыл бұрын
Yes it is silicon. Thanks for watching sir.
@albertopaganini7650 Жыл бұрын
@@j-woodworking9573 Does the silicon make such a tight bond with wood? Doesn't it fall off after a while ? Sorry for the dumb question here.
@davidelliott5843 Жыл бұрын
I think acrylic mastic/adhesive does a better job than silicon sealant. It's used in car body shops under names like Tiger Seal.
@marcciesla92383 жыл бұрын
Excellente vidéo. Simple et fonctionnel ! Merci pour ce partage. Salutation de France.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@OldGloryLumberandMilling Жыл бұрын
I've been looking for a jig such as this to flatten slabs with my hand planer that are too wide for my 735. Thank you!
@Homeworkshop_Evgeniy3 жыл бұрын
Хорошая идея если нет рейсмуса, надо будет повторить 👍!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@vervolfus3 жыл бұрын
Лутше рейсмус купите. Пусть самый дешовый. А с этой хренью упаритесь. Хороша только в одном случае, когда толшина не принципиальна. Банально 1мм упаритесь ловить.
@shivkumarsharma15832 жыл бұрын
@@j-woodworking9573 omoo
@shivkumarsharma15832 жыл бұрын
@@j-woodworking9573 o
@wolverine16942 ай бұрын
I believe that would work way better than a router sled... thanks for sharing... God bless
@keithken2828 Жыл бұрын
Awesome technique, superbly done ✔️
@ltjuglans1943 жыл бұрын
One day, long ago, I bought an electric hand planer. I used it once or twice. But now I know what I can do with it, Thanks for the idea.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@alfredomarquez97772 жыл бұрын
One thing very few people noticed, is the GREAT use of the MAKITA Model 1912B Planer, which is WIDER that the standard electric hand planer: (4 3/8" versus only 3 1/4")... this makes it much better than using the common 3 1/4" hand planer. That model is very powerful, precise and solid, and its baseplate is bigger, giving a better, flatter planning. ITs only drawbacks are that Makita only has High Speed Steel blades in 4 3/8", which have a less hard and durable edge, although those can be conveniently resharpened thanks to the guide included in the planer; and that the shavings discharge port is not round, making it difficult to connect the the vacuum, otherwise it is a unique and wonderful machine.
@samuelluria4744 Жыл бұрын
I appreciate your knowledge! Not sure I'd necessarily want a wider one for many projects....surprising that they'd design an ejection port that wasn't round!! Very odd...I have a Bosch....using it for years, but I wish had a battery powered Makita....I think it also has better placed threaded sockets on the sides, for attaching "homemade" gizmos like rails...
@alfredomarquez9777 Жыл бұрын
@@samuelluria4744 ADDING threaded inserts to the sides (or top or front/rear) of the tool body is easier than you may think... I have used those threaded inserts meant for wood, with coarse threads outside and machinescrew threads inside, both in 1/4 20 and 5/16 18 (larger preferable!), because those are readily available here in Mexico. But I plan to investigate in detail the "E-Z Press™ Special for plastic" inserts. On my large MAKITA 1912B 4 3/8" wide planer, I am planning (pun intended!) to cut some threads into the thick aluminum sole plate, because those would be even firmer than attaching screws into the insert into the plastic body of the planer, and the thick base plate allows plenty of room. By designing a good adjustable height mechanism, this can result in a quite precise adjustment, and that could mean an inexpensive tool many times more affordable than a Bench Planer or Edge Jointer. The several excellent videos from a couple of extraordinary Japanese (or Oriental) carpenters, show clearly that, working with patience and dedication, precise enough bench tools can be made with wood or combined materials from inexpensive electric hand tools.
@samuelluria4744 Жыл бұрын
@@alfredomarquez9777 - Wish you the best on your projects!!! This is something I will have to do at some point! As a side note, does anyone in your area work with a sanding table? There are some factories near me that use them industrially, but they'd charge an arm and a leg for piece work....
@BruceJC752 жыл бұрын
Way more advanced than what I was thinking of, but it definitely works.
@-grandsonofcarpenter59873 жыл бұрын
멋진 지그네요 전기대패 사용하다보면 많이 씹히던데 잘봤습니다
@j-woodworking95733 жыл бұрын
제 자동대패가 작아서 작업에 지장이 많았는데 조악하지만 해결방법이 생겨 행복합니다. 감사합니다.
@MichiganHiker3 жыл бұрын
Excellent! I am going to be creating a composite beam and you just showed me how to plane the edges.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@robertdubuc38803 жыл бұрын
Hello, great video plus brilliant idea ? The Makita Power Planer I own is the 1100 model. Do you think it might work the same way to build-up the assembly ? Thanks, Robert
@jatiajifamily56412 жыл бұрын
Pekerja'an yg telaten..salam dari infonesia..
@kristophermarsh94003 жыл бұрын
This is what I love about your perspective simple but extremely effective.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@dancahill91223 жыл бұрын
NOT the least bit effective imho ! No explanation whatsoever AND even worse, no links for any hardware (that he MAY have used) !NOT EVERY WOODWORKER WATCHING THIS HAS YEARS AND YEARS AND YEARS OF EXPERIENCE !
@j-woodworking95733 жыл бұрын
Sorry about that sir.
@edgarshoe3 жыл бұрын
Genius! Beautifully done!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@wojciechm24283 жыл бұрын
Thanks for sharing this creative idea!
@j-woodworking95733 жыл бұрын
My pleasure. Thanks for watching sir.
@BeachsideHank3 жыл бұрын
Good build, but ROLL YOUR SLEEVES UP when working on the tablesaw, you were in great danger of having your arm pulled into the blade if the sleeve had been caught by it.
@j-woodworking95733 жыл бұрын
Thanks for your kind advice sir. I'll be careful.
@Eddie.Mootsen3 жыл бұрын
Better advice -> build yourself a run-off table, then no need to reach over and catch work pieces before they fall onto the floor
@xl0002 жыл бұрын
Watch matthias wandel test on that. It just doesn’t happen on a table saw. Happens on a lathe though
@waxhead633 жыл бұрын
Just love these videos about making copious amount of wood shavings and sawdust ... priceless ... now I can have plenty of fire starting material
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@user-tq8ip5xl2u3 жыл бұрын
정말 좋은 아이디어네요 많은 도움이 될것 같습니다 고맙습니다
@j-woodworking95733 жыл бұрын
감사합니다
@namoothewoodprojects3 жыл бұрын
I think this planer works better than the one with router! Good idea 💡
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@davidfrancis889923 күн бұрын
I am amazed this guy has any fingers left
@backdraft808 Жыл бұрын
Brilliant! Great design.
@alexe15633 жыл бұрын
It's beautiful to watch work well done. Very smart!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@billr42833 ай бұрын
나는 당신의 전기 대패질 비디오를 보고 있었습니다...정말 훌륭해요. 나는 60년대 후반에 한국에서 2년 반 동안 살았습니다. 구독했습니다. 감사해요
@tigaieandrei72822 жыл бұрын
INTELIGENT TIMPLAR !!!!
@j-woodworking95732 жыл бұрын
Thanks for watching sir.
@ttttyyyy4202 жыл бұрын
영상 잘봤습니다! 목공방 창업예정 중인데 좋은 정보얻어갑니다아~~!~! 수압대패 대신 지그 만들어서 사용하면 좋겠네요ㅠㅠ
@j-woodworking95732 жыл бұрын
번창하길 기원합니다. 감사합니다.
@technewsfortechnoobs Жыл бұрын
Makes me want to work up a lineal rail system like this to use with my little WEN Hand Planer
@thijs1993 жыл бұрын
ah I got this boss planer. It's got two threads on the front and this red plastic thing underneath which you can place a rod or so, now I know where it's for haha, very helpful!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@serbanpopescu10323 жыл бұрын
Hey, I got the same planer! Was always wondering why I bought it in the first place, it's not a very useful tool at all (not even for finishing, as it can't be dialed to zero depth). Now I see that every impulse buy has a purpose in the end...
@Gus00463 жыл бұрын
Buena idea. Gracias por tus vídeos. Un saludo.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@qbnwndr3 жыл бұрын
I’ve been contemplaining (
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@alfredomarquez97772 жыл бұрын
Do yourself a favor and buy the makita 1912B model, because it is wider and longer. Its 4 3/8" width blades are way more convenient than using a smaller, standard hand planer. I have it, and feel it is a way better buy considerning its size, weight, solidity and powerful motor. I have not seen any other larger than 3 1/4" wide electric hand planers. Makita has a monster one at a full 6" width, but it is expensive and not available in my country, but the 1912B is still very convenient overall.
@getitenterprise2 жыл бұрын
If I had 1% of that skill.. geeeeez. Great job my guy
@j-woodworking95732 жыл бұрын
Thanks for watching sir.
@user-wd3ed6qt1c2 жыл бұрын
Так быстрее чем с фрезером для хитрых дел. А рейсмус он и рейсмус. А когда спил дерева ровняешь. Думаю это зророво! Лайк!
@j-woodworking95732 жыл бұрын
Thanks for watching sir.
@superspecialty5169 Жыл бұрын
TY 4 the brainstorming ideas,showing me what not to do / how to make the jig simpler. Also, you should review your video to count how many times your hand passed over the saw blade to place the wood on the other side of the fence!
@Bluebuthappy1823 жыл бұрын
Great minds must think alike. I did something very similar when i wanted to make piece of wood round. My solution was more temporary than yours and by the looks of it mine was heavier which in retrospective was a bad thing because it knackered me after about 20 mins. But once you have it made and set up it works a treat well done.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@germangarces81942 жыл бұрын
Buenisimo, great job.
@j-woodworking95732 жыл бұрын
Thanks for watching sir.
@Paopao6212 жыл бұрын
excellent idea. now iwont have to buy those expensive ones.thank you
@tukang_qidal Жыл бұрын
Mantap pisan euy
@BradiKal613 жыл бұрын
Dude- you are the God Of Power Tool Guides!
@j-woodworking95733 жыл бұрын
You went too far. Thanks for watching sir.
@dogzer11 ай бұрын
great! this way we can ensure a perfectly flat surface!
@tjerkheringa9372 жыл бұрын
Very clever! Way better then routing.
@ruebenglab49393 жыл бұрын
This is a fantastic jig!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@rdvscan2 жыл бұрын
I love this idea. And, I'm obviously missing the blade mounting jig. I have never had one and was wondering where I might be able to get one.
@j-woodworking95732 жыл бұрын
Sorry I don't know either sir.
@bernhardtammen44633 жыл бұрын
Super Idee Dankeschön fürs Zeigen
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@johnnyalarcon28682 жыл бұрын
Buena idea...saludos desde ecuador..like..👍
@user-kr7ux1fx6i3 жыл бұрын
The idea you've come up with is excellent and very beautiful.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@manoranjansardar24093 жыл бұрын
@@j-woodworking9573 twpittro
@nartomebeldiy31562 жыл бұрын
Good bosq 👍🏿👍🏿👍🏿👍🏿🙏🏿
@chrishad95 Жыл бұрын
Raise your hand if you've ever used one of these hand planers and "planed" the cord on the backstroke... 🖐 ⚡⚡Thanks for the cool video. I like the idea.
@Nick-cs9dt Жыл бұрын
I guess only you, lol.
@koccocarrasco56963 жыл бұрын
Que gran idea...!!! 👍🏻👍🏻👍🏻
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@paulstanding72673 жыл бұрын
Very nicely done and shown simple jig that saves a lot of time and money leavening wooden boards nice take care 😀👍
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@bebekguitar20073 жыл бұрын
Man, I was just trying to imagine a way to do this and you nailed it! But I think a router sled is much simpler and easier to adjust cut depth (I imagine), so I'll probably do that, but still awesome job.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@devonswindell97352 жыл бұрын
A router sled takes off way less material at a time.
@bruceyoung80362 жыл бұрын
There might be more of an adjustment with a router depth wise but I expect this method would provide a flatter finished product overall.
@lindam.92822 жыл бұрын
@@devonswindell9735 In my case that's a good thing. I tend to take too much off when I'm using the planer. I can't seem to ever get it right. Maybe I'll have more success with my planer. I keep gouging the wood at the ends. I really want to use my planer so I'll try this for sure.
@samuelluria4744 Жыл бұрын
If you make a rail system which is adjustable, using angled aluminum, for example, with multiple notched attachment points, you can adjust very well.
@sapelesteve3 жыл бұрын
That is an awesome jig J! Great idea & nice work......... 👍😉😉👍
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@PondokKlene772 жыл бұрын
sangat mengagumkan hasilnya. Sukses selalu.
@j-woodworking95732 жыл бұрын
Thanks for watching sir.
@BeimBastler3 жыл бұрын
Eine super Idee und ist wirklich simpel nachzubauen.👍🏼 BR Helmut #BeimBastler
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@Rocketninja2003 жыл бұрын
Just yesterday I was telling a friend, "those things are only good for rough work like fitting a replacement window into an opening".
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@mickleblade2 жыл бұрын
Even withou the jig they're damn good, with a gentle touch you can get excellent results. But they make a horrible mess with dust collection.
@saneauto7 ай бұрын
I like it! 🏆
@MCsCreations3 жыл бұрын
Brilliant work, dude! Fantastic! 😃 I just subscribed! Stay safe there with your family! 🖖😊
@j-woodworking95733 жыл бұрын
Thanks for your kind comment sir.
@josephpegu94722 жыл бұрын
Ur
@josephpegu94722 жыл бұрын
Rhe
@asrifahlevi15522 жыл бұрын
Inspiring your good idea ... thank you
@canadaeh67573 жыл бұрын
Well, there’s definitely enough people on here pointing out how close you are to that blade (they’re right). Done careful, fingers are hard to reattach after they’ve gone through a saw... However, I have one of these planers, and wondered how to get it to work better. I have a router too, but I’m going to try this, it’s a great set up!
@j-woodworking95733 жыл бұрын
Thanks for your kind advice sir. I'll be careful.
@Sham1r02 жыл бұрын
how unpredictable do you expect a table saw to behave with a sharp blade and cutting soft wood? I mean it's not a 100 years oak peace or anything. Simple pine is soft and nice to work with, saw cuts through it like a hot knife through the butter.
@danielredondo10903 жыл бұрын
hola me ENCANTO saludos de Daniel Argentina
@j-woodworking95733 жыл бұрын
Thanks for watching sir. Greetings from Korea.
@richardsmith41473 жыл бұрын
What was the adhesive you used on the back of the plane? Seems to hold really well. Great idea
@j-woodworking95733 жыл бұрын
Silicon. Thanks for watching sir.
@user-jc1js6rg4o3 жыл бұрын
Мастеру респект
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@littlegreenman.61972 жыл бұрын
Very very clever and what a great idea. I enjoyed the video. 👍👽👏👏
@DrRaven03 жыл бұрын
Brilliant idea, I got to try and make this.
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@AndreiIR0003 жыл бұрын
Brilliant idea!!!
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@asbarney0163 жыл бұрын
GREAT JOB!!! Thanks
@j-woodworking95733 жыл бұрын
Thanks for watching sir.
@bradleytuckwell48542 жыл бұрын
A bit of setting up to do but after that you get a beautiful finish.Have you thought about putting a spiral blade on or are you happy with the straight blades.
@j-woodworking95732 жыл бұрын
The electric planer doesn't have spiral blade option. Thanks for watching sir.