These are the best products available in India. I strongly recommend it to try.
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
Thank you for your nice review!
@ratnashrivas61124 ай бұрын
Price?@@KAPPA_PLASTERING_MACHINES
@joshuaadekola63257 жыл бұрын
very good , please show the compressor and the pray mechanism and the source of cement mix
@thaiiexpat106 жыл бұрын
Seems like the metal screeds stay in the walls, right? So how does it just "Cover". I'd be concerned with cracking with AC/variations of temp and the mix of metal and concrete. The plaster cover is very thin over the meta. Cracks?
@XX-kf7mx3 жыл бұрын
@25:40 it says in the video that the level strips were removed and the gap were filled with excess plaster
@huuamai81512 жыл бұрын
@@XX-kf7mx Wow, no way... You'd have to break up the concrete to take them out, and if all you do is fill it with concrete, for sure it's going to crack. Aside from that, if they take out the metals, then what is holding the concrete slab to the wall? I doubt a primer is a strong enough bond to join them.
@Summersault666 Жыл бұрын
@@huuamai8151 it will not break if you remove after a couple hours
@fleischger532 жыл бұрын
wonderfull ! Best work, but also wonderfull music !
@saurabhkirodiwal7 жыл бұрын
Everything seemed to be great.. Only if you could tell us about sand proportion with cement.. Waiting...
@babakopoulo2 жыл бұрын
Later , you remove the wall skeleton, or you leave them inside the plaster ?
@Z-add2 жыл бұрын
What do you do with the leveling strips after plaster. Do you remove them and plaster the gap?
@unathisonakileiviwe12722 жыл бұрын
I think they stay inside
@constructionspedia5 жыл бұрын
super good plastering
@ketanmehta42925 жыл бұрын
Good machine saves time
@alpiassabar67944 жыл бұрын
Good job
@kapishsharma10186 жыл бұрын
GUYS, YOU JUST CUT THE MAJOR PAIN IN ASS STEP WITH THIS TECHNIQUE REMOVING LEVEL STRIPS AND LEVEL THE PLASTER VERY SMART....
@krishnagarike72706 жыл бұрын
Super super very good
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Thank you!
@kwameadzina28357 жыл бұрын
Very good and faster
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
Thank you!
@MuhammadAdnan-kn7kc6 жыл бұрын
very nice
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Thank you!
@bipinpatel87494 жыл бұрын
Excellent
@Tukangdibaruhjaya2 жыл бұрын
nice
@evasagayno44686 жыл бұрын
Wow very nice and easy.
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Thank you.
@padmacr45216 жыл бұрын
Super
@atwetabrian92536 жыл бұрын
GOOD WORK AND FASTER
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Thank you!
@ronaldgallardo12494 жыл бұрын
Nice
@manuelmedialuna6374 жыл бұрын
Hi I am interesting about this machine .
@ΜάριοςΛοϊζίδης7 жыл бұрын
Why were guide rails not removed and filled? Isn't this a problem for the plaster with cracks? And why, since those rails are not removed aren't they with an edge facing out and are flat?
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
Μάριος Λοϊζίδης Hello, good point. Definitely the rails removed and all gaps filled. It is easy and not considered as a step hence we didnt show it to not prolong the video duration.
@SuperIcekool6 жыл бұрын
What happened to the timber battens? If left inside one have differential expansion and hence cracking a long the batten line.
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Hello, they are aluminum profile strips and they removed after the initial leveling. The applicator fills the gaps with the excess material.
@aby0ni6 жыл бұрын
I think the spacing should be increased to about 3 meters, and the screed box should be long enough to level the plaster in between guided by the battens. Or you can use the battens as formwork to plaster perfectly level, wait for the plaster to cure, remove the battens and then use the small strips pf cured plaster as guides themselves. What do you think?
@akilaiocamacho54643 жыл бұрын
@@KAPPA_PLASTERING_MACHINES can you make a video with the removal process?
@mrseetharamank6 жыл бұрын
fantastic work
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Thank you sir!
@rajivpillai18764 жыл бұрын
Where is this place
@munnadabbawar50114 жыл бұрын
Super.
@orlandovergara73976 жыл бұрын
muy bien,,, primer paso de pegado de mezcla importante, y después (2do paso) dar nivel, esas reglas guías de nivel en pared y corte de mezcla son de aluminio, ? el compresor o equipo cuantas libra de presion (spi) o Bar es necesario? .. la empresa comercial (país de venta) que la vende?...saludos desde Panamá
@matutosabido72765 жыл бұрын
quem nao deve esta gostando eos fabricante de colher de predeiro
@demahendra17953 жыл бұрын
Good...verygood and and so fast.. i want yo know where to bay it.?
@mohammedyakut80743 жыл бұрын
I want the spray machine how much it costs and how can i access The metal strips are remain there what are you going to do with??
@shawnlion47785 жыл бұрын
Good work, guys
@williammartin10196 жыл бұрын
Bravo.
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Thank you sir.
@intizarali48966 жыл бұрын
l like it good technology
@h.n.arundhatibhargav37962 ай бұрын
Are these spray machines available for rent in banglore / mysore India?
@senthilashwin11827 жыл бұрын
simple the best
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
Thank you!
@divinamuring54666 жыл бұрын
Well done
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Thank you!
@bawabatbahla78237 жыл бұрын
Hello Thank you for the video I like to ask about strip, are we should removed after completing the plaster? Thank
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
Yes, all strips removed and used again.
@bawabatbahla78237 жыл бұрын
KAPPA Plastering Machines thanks
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
Welcome.
@vivekvivek20086 жыл бұрын
what is the price of fast plaste machin kappa
@renandelimapereira59706 жыл бұрын
Belo trabalho !!!!
@IndramayaParajuli Жыл бұрын
🎉❤3 and 0
@scheibauerrobert12347 жыл бұрын
this TEHNIK must come from NASA!!! NICE!!!
@jaymendoza48756 жыл бұрын
do you have a Company here in the Philippines?
@pashamaster80682 жыл бұрын
en general, las muescas se hacen en una pared lisa. o una proyección de cemento líquido con una capa fina y luego una capa de mortero 😏
@babulsarkar96153 жыл бұрын
Need under 2 Lacks plastering machine, will available ?
@frankmartinez72183 жыл бұрын
I wonder if they have perlite with fiber in it 🙂
@Adityaagrawal035 жыл бұрын
What about those leveling strips used, don't you take them out?
@stevenrwihimba39552 жыл бұрын
Very good. How much is the machine?
@rahissm15235 жыл бұрын
Shall we remove the leveling strips?
@akilaiocamacho54643 жыл бұрын
Can this be used for a stucco installation?
@georgeversluis8442 Жыл бұрын
As a plasterer of 50 years, I call bs. The screeds used make it super easy to spray and then level. The real work is in doing the inside corners or radius work. Curves are for plaster, flat walls get sheet rock I would like to bet that two men and a mud mixer could do the same yardage without the expensive equipment
@thaiiexpat106 жыл бұрын
You leave the metal in the wall? I would think you use it to screed, then remove. Don't you see the differene in Materials if you paint the wall?
@abdulmuis87733 жыл бұрын
Hci
@ganeshkhandare4337 Жыл бұрын
Sir mujhe ye masen Leni hai uski kimat Kya hogi plg
@frankmartinez72183 жыл бұрын
more to it than just using the you need a darby ,a slick stick,a hawk trowel 🤦♂️plus a scratch coat and brown coat as you see b4 they spray the top coat👍
@NemalapuriRupusundararao Жыл бұрын
Dear Kappa team, I am impressed, I would like to know that is there any contractor purchased plastering machine from Srikakulam District, A.P., India. If yes, please provide their contact numbers.
@alawanampuan8830 Жыл бұрын
I need your vontact number
@alawanampuan8830 Жыл бұрын
VPNTACT NUMBER MUST BE SENT TO ME
@alawanampuan8830 Жыл бұрын
CONTACT NUMBER MANDATORY TO FORWARD TO ME
@pgpproblemsofgeneralpublic38737 жыл бұрын
Really nice kis prakar Banti hai mashin please
@karangupta67435 жыл бұрын
What happens to the level strips after plastering?
@georgelsla50414 жыл бұрын
They stay input i guess
@deanoh64144 жыл бұрын
@@georgelsla5041 The video says "After removing levelling strips...." shame that don't show that step. Must be a ball ache I guess.
@ashrafsiddiqui41704 жыл бұрын
Can machine spray with sand and cement or only cement?
@MrNpranay5 жыл бұрын
from where the sprayer taking the mixture, the container not shown, it will give a complete picture.
@KAPPA_PLASTERING_MACHINES5 жыл бұрын
Hello, in this video we focus on the application since the machine function and quality is granted. You can see the machines here: www.kappamachines.com
@subbarao8rvp4 жыл бұрын
can u tell me this machine is available in hire basis we need home plastering work so we need hire basis
@saleembaksh3822 жыл бұрын
Iam interested in buying wheater you provide training to Mason
@sudeshkadav33112 жыл бұрын
How can I order this machine & what is the price of this machine in India .
@skmojaharali87166 жыл бұрын
Super
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Thank you.
@dr.zunair9675 жыл бұрын
May i get this KAPPA Plastering Machines in Pakistan??and in how many rupees??
@RajeshNirala13 жыл бұрын
Bhai ye spray plastering machine kaha milega. Kis company ka hai. Kitna price hai.
@Psofos926 жыл бұрын
its a good method its true,effective on a large work but its a bit messy(im soooooo jelous you,0 edges ,just a wall thats all )
@azizurrahman73475 жыл бұрын
Is it available in guwahati, Assam? . I m planning to build a house. Please provide information as soon as possible.
@aniketsarkar72634 жыл бұрын
Hijuly I am from West Bengal machine showed in tube I want to buy that machine .which is available in kolkata please send price& address at kolkata
@adrianoleuzzi22174 жыл бұрын
Buono il ripasso!!!
@frankmartinez72183 жыл бұрын
nice newer system we used to have to run a 3"hose about a mile up scaffold from pump station talk about tiring 😝
@pramodpandit74646 жыл бұрын
Good technic
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Thank you!
@mrme85787 жыл бұрын
awesome
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
Thank you!
@arielmartinez87513 жыл бұрын
afterwards people don't know why the reboque falls off, yes of course, the first applied is totally "burned" ...
@ragraphicsartsigncompany72457 жыл бұрын
Fantastic
@tomkamea68006 жыл бұрын
It looks good but will affect drilling of holes especially when you have levellers installed in the wall
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Hello, no holes at all, the levelers are removed and not installed in the wall.
@tomkamea68006 жыл бұрын
KAPPA Plastering Machines .thanks for the feedback
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Welcome.
@c6_si2 жыл бұрын
@@KAPPA_PLASTERING_MACHINES I want to buy one for Iraq.
@maggseb3 жыл бұрын
Where is this at? Where do you have representation at?
@KAPPA_PLASTERING_MACHINES3 жыл бұрын
Hi. IN our website you can find many information about the machines www.kappamachines.com
@SaiKumar-ec8ft6 жыл бұрын
Is there any chance to get this in a rental for couple of days
@skipkot58217 жыл бұрын
It seems like that guy could spray forever , how big is the tank?
@heavydutypainting92256 жыл бұрын
Skip Kot There is at least one guy feeding the machine. At least one helper with the two plasterers. Minimum of 4 guys.
@janmejaysingh39684 жыл бұрын
In
@vksingh51166 жыл бұрын
Where to bye this Plaster machine?
@kalyaankumargogineni85237 жыл бұрын
Or is this product available for rent to test it.
@dspvlogs91214 ай бұрын
What is the cost of the machine
@AyiviTV4 жыл бұрын
Cool 👍🏼
@kalyaankumargogineni85237 жыл бұрын
Is this machine sold in Chennai . Want to see the experience of your existing customer in Chennai
@bhikho1237 жыл бұрын
Kalyan Kumar gogineni please contact us on 8511115214, and we can provide you all necessary details to witness the live demo/ work at Chennai site.
@sabirali88702 жыл бұрын
i need this
@tahirajmal9377 жыл бұрын
U never show the Machine please show the Machine and manufacturer addresse, web side
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
Hello, our purpose was to show a demo of the application without extend the video more by showing the machine which is not so important, KAPPA machines are well known. You can see the machines in our site www.kappamachines.com
@sdtinvestment19887 жыл бұрын
can we get one here in Namibia is very nice Machine
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
Hi, thank you for your nice words. Please send us your inquiry to info@kappamachines.com
@bongmartinez55876 жыл бұрын
HOW MUCH
@irfan3emi61511 ай бұрын
Where can I buy this machine?🤔
@SidneyPratt6 жыл бұрын
Great, looks like gunite, thanks.
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Thank you.
@sureshacit00864 жыл бұрын
@@KAPPA_PLASTERING_MACHINES send me your number
@KAPPA_PLASTERING_MACHINES4 жыл бұрын
@@sureshacit0086 Hello, you can find details about the machines and contacts here: www.kappamachines.com
@t-squaredrywallsoler9801 Жыл бұрын
Where do I buy this machine
@brettknoss4862 жыл бұрын
Cam this be used to apply plaster straight onto fiberglass or steel lath?
@Arbago300 Жыл бұрын
never apply on steel, it will crack.
@franciscocosta9193 жыл бұрын
I usually use 2L6 but I want another one with a higher flow.
@AK4TT3 жыл бұрын
What part of the world are you? I'm interested in this equipment
@franciscocosta9193 жыл бұрын
@@AK4TT I'm in the state of Espirito Santo, Brazil. I am interested in buying a stator and rotor for my plastering machines. Where are you?
@murtazakazmi4628 Жыл бұрын
@@AK4TT how many rotor stators do you want? Give me your whatsapp I will give selection book of rotor stators
@alimuzzaman706 жыл бұрын
I'm from Bangladesh.How can I get this machine.
@scousedixin44122 жыл бұрын
Consider the damp bridged
@meghrajbhonsle80086 жыл бұрын
Please show machine and the method of mixing.
@KAPPA_PLASTERING_MACHINES6 жыл бұрын
Dear sir, please visit our channel and you will find many informative videos: kzbin.infovideos Also this video maybe it will help you: kzbin.info/www/bejne/oqqUoHx3m9CCatE
@oliverkhoo6 жыл бұрын
nice music
@mohanpvn23492 жыл бұрын
What is ratio ? And water
@anilbennur10737 жыл бұрын
Good information nice
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
Thank you.
@muzaffarahmed56663 жыл бұрын
Is that machine only for RCC surfaces or block work also
@mohanraja60683 жыл бұрын
Hi brother Have you got this machine sir?
@varshachauhan13102 жыл бұрын
Can I rent this machine for a Day?
@Z-add2 жыл бұрын
What material is the leveling strip.
@macplastering5 жыл бұрын
Thats it spray it dont say it :)
@KAPPA_PLASTERING_MACHINES5 жыл бұрын
Hello, it is not obvious?
@macplastering5 жыл бұрын
@@KAPPA_PLASTERING_MACHINES The saying was in humour my friend good work
@KAPPA_PLASTERING_MACHINES5 жыл бұрын
@@macplastering Thank you, You too!
@mrnobody9743 Жыл бұрын
Dear Kappa i want this one, in gujrat. ASAP
@robertdorai20103 жыл бұрын
any body can do this plastering service for my house
@jayashreesridhar73193 жыл бұрын
Can you do plastering service in chennai how much cost per sqft
@madusudanmahapatra25826 жыл бұрын
Sir How price this product? I want to buy now So, please sir give me information
@rafiqnadaf20755 жыл бұрын
rafiqnadaf83@gmail.com
@joelwalton34734 жыл бұрын
Gg
@trinifirst67027 жыл бұрын
Why didn't you show how the strips would be removed?
@KAPPA_PLASTERING_MACHINES7 жыл бұрын
The video is already long and we did not make it longer with something which is not considered as a step and focus on the important aspects. The removing of the strips is very easy and fast since they are installed with mortar only.