Plasti Dip your own stripes

Super Sport/SS style Quick and Easy (Wham Bam!) I decided to plasti dip some stripes with some HackNpackShop inspiration sum bitch!
• Best of Hack N Pack Shop

[@michaelwarren8258]

U have to go fast removing tape while wet or else you your edges will peel

[@aaronfuksa2047]

hurry, hurry! tape first! slow is not ideal, wet that coat, & get to pulling that tape up right away if you want sharp lines. only way. big areas need a spray gun for a quick pace.

[@scottforbesjr6427]

The guy at DYC said, and I found out myself, is to waste no time in getting the tape off before it drys. Helps a lot to have more than one person so you can get it off even faster.

[@savealifecounselinggroup1070]

I think you did a good job and i will follow the same steps to do the same on my pt cruiser

[@Cobra_427]

doing a white bumble bee stripe on the tail of my black 2007 Charger SE, going to be a plain stripe just like some base models back in the late 60s

[@SWACBUZZ]

Think you got to make closer 50/50 strokes with the can to keep from getting the tiger striping. Doesn't look terrible though. Good job! You should get the gun from DYC and not use cans. You have a garage so I envy you. I live in DC so I can't do this.

[@AintScaredGarage]

You got pull the tape when the plasti dip is still wet or it will lift it off the car

[@travissteindl]

It was unmasked immediately after the final coat it drys that fast

[@702xRyder]

Trick is remove tape fast or your screwed

[@224chingon]

Great job close to perfect

[@five7phew550]

It look good man’

[@kimbreanna9472]

looks good!

[@agajohanna428]

should have peeled the 1/4" tape 1st, then the outer/centre 2" tape, then the plastic with Toronto Star news paper eh

[@ttv-doritosgod3123]

Will this come off in the car wash ? I’m thinking about doing my Nissan Titan

[@ChristopheZ]

my grille on my mercedes is plastidip in black....it goes thru car wash without issue. However, I like to wash my car by hand... I am doing stripes tomorrow ( in silver)

[@karma-616]

looks p good to me

[@224chingon]

I hate the fact that when u are peeling the tape the plastidip starts to lift up. Had the same thing happen to me. Idk if you have to let it dry longer. Any one have any idea?

[@WhatInTheActualHealth]

I learned the hard way. You actually want to peel the tape while it is still wet. When plasti dip dries, it will stretch and pull on the striped part. Hope this helps.

[@travissteindl]

I used a heat gun to get it hot as I peeled the the masking tape off

[@jonathanleslie9100]

how much time between coats? how long was the entire job?

[@alanarcher5954]

Why not just use vinyl striping?

[@travissteindl]

This is cheaper and more fun for me

[@user-sx4yu3nw4j]

Tiger stripes. But yeah, you said it, it looks like shit. Good first attempt, and a great video for lessons to learn from.

[@donaldredline975]

A little rough

[@islandboy7432]

plasti fly lol

[@trayclark4098]

How many cans did you use ?

[@travissteindl]

2 cans