PLASTIC SAND TILE MACHINE. Only from recycling plastic and sand.

[@Abrahami]

What is the global cost for a complete solution (extruder, compressor and everything needed) ? What kind of plastic can be used (plastic bottles) ? What temperature do you need to melt sand and plastic ? And is this expensive in electricity ? How much does it cost to create new mold ?

[@kotarakafeliks]

We are the producer of this machines. The installation costs 78000 euro with the moulds. We can make the moulds with a drawing or muster in Your standart/the standart is different in the countries/. Time to work-3 months.Installed power-20 kW The installation includes: 1.Specially extruder 2.Press machine 3.Calibrator cooler for the ready details The machine can make 60 pieces per hour. The making area is 20 m2 without warehouses. If You have any questions please send us.The produce time is two months . The line for the production of floor coverings and roof tiles is the same. Just change molds. There is also a difference in the plastic mixture because it can also be used petrified PET bottles. The installed power is 25 kilowatts, but the working consumption is about 10 kilowatts. The blending ratio is 30% plastic and 70% sand. Marble flour can also be used to better achieve the desired color. For paint, use is an oxide cement paint.. The cost does not include delivery costs. You will get a detailed video on launching and operating the machines. You need to specify what details you want to make.

[@tlotlomooketsi5578]

@@kotarakafeliks how can one contact you?

[@kotarakafeliks]

@@tlotlomooketsi5578 My email is [e-mail] whatsapp is 00359888494116

[@jekader]

Very nice equipment and great soundtrack! Plastic pavement sounds like quite a durable solution and should have a lot of use cases.

[@edwinfoo5837]

How can I get the machines to buy

[@standrew69]

Thank you for this. Can you tell me how strong the press must be. As I have an old press but I doubt it is powerful enough. Does the equipment in total fit inside a 20 foot container for shipping purposes?

[@kotarakafeliks]

The press must be a minimum of 120 tons of pressure. No problem for the installation to fit in a 20 foot container. We've done it many times before.

[@fabianocararo6062]

Congratulations for the video and the attitude! Besides plastic, do you use something else as a mixture?

[@kotarakafeliks]

Only plastic ,sand and color

[@brianevolved2849]

@@kotarakafeliks wou you give me your recipe please

[@kotarakafeliks]

@@brianevolved2849 My whatsapp is 00359888494116 please write me there.

[@kingsolomon2571]

This is a GAME CHANGER 👏🏿😎.

[@sssafir]

How much tons applied in these hydraulic presses? Say the first square pavers? Thanks.

[@kotarakafeliks]

120 tons

[@canal24federal86]

aparte del plástico, le agregan algo a la mezcla?

[@kotarakafeliks]

Arena

[@recicladosdecaucho7677]

Do you chill the mould or not necessary ? How do you chill it?

[@kotarakafeliks]

Yes I chill the mould. There is water cooling inside.

[@recicladosdecaucho7677]

@@kotarakafeliks do you use an industrial water chiller? like the ones used for plastic injection?

[@recicladosdecaucho7677]

​@@kotarakafeliks in the tile mold press i don't see water hoses

[@kotarakafeliks]

@@recicladosdecaucho7677 Write me on Whatsapp [phone]

[@LiberiaJo]

What is the moisture content of the sand used in the process?

[@kotarakafeliks]

It is minimally the best.

[@farkhandadalal1815]

Can u please name all the machines that ur using? Would be really helpful. Great work btw

[@kotarakafeliks]

We are the producer of this machines. The installation costs 78000 euro with the moulds. We can make the moulds with a drawing or muster in Your standart/the standart is different in the countries/. Time to work-3 months.Installed power-20 kW The installation includes: 1.Specially extruder 2.Press machine 3.Calibrator cooler for the ready details The machine can make 60 pieces per hour. The making area is 20 m2 without warehouses. If You have any questions please send us.The produce time is two months . The line for the production of floor coverings and roof tiles is the same. Just change molds. There is also a difference in the plastic mixture because it can also be used petrified PET bottles. The installed power is 25 kilowatts, but the working consumption is about 10 kilowatts. The blending ratio is 30% plastic and 70% sand. Marble flour can also be used to better achieve the desired color. For paint, use is an oxide cement paint.. The cost does not include delivery costs. You will get a detailed video on launching and operating the machines. You need to specify what details you want to make.

[@farkhandadalal1815]

@@kotarakafeliks wat is the machine which converts the plastic mixture into the the hot paste like form called

[@kotarakafeliks]

Extruder

[@ninatyler1114]

they can make the machine for you if you email them at [e-mail]

[@salawukabiru3934]

@@kotarakafeliks please i need your contact i want to make an order

[@AliAkbar-fq5cs]

Is it fire registant?

[@Tommy_Mac]

How long does the extruder screws last? Do you have a representative in the U.S.?

[@kotarakafeliks]

After one year you must change the propeller of the screw

[@vgramatski]

@AndreyKolev is this in Bulgaria? Would be great if more recycling projects can take off here, good luck!

[@kotarakafeliks]

Yes in Bulgaria.That will be good!

[@princemado6858]

How much for this machine complete line

[@kotarakafeliks]

@@princemado6858 78000 euro

[@kotarakafeliks]

@@princemado6858 78000 euro

[@evergreenamit2554]

which machine is used for melting or mixing send?

[@kotarakafeliks]

Extruder for melting plastic and sand. Write e on whatsapp [phone]

[@dragonden9227]

Sir what is that called and what part of job it does after the plastic tile is removed from the mold and then placed under the thing pressed thanks

[@dragonden9227]

Not the mold press machine after the press machine

[@dragonden9227]

1.30

[@kotarakafeliks]

Calibrator

[@atata5763]

Hi Mr. Andrey! Please, I'll like to have your contact details, the present price of these machines and also also the possibility of fabricating different molds? Would you ship the finished product to Africa or you'll come down and build here? Thanks.

[@kotarakafeliks]

Please write me on whatsapp [phone]

[@emmanuellab.appiah3569]

Country code please

[@rita2959]

Molto interessante e belle le forme delle mattonelle. Si può fare con sabbia riciclata dalle demolizioni? Credo che questo sia un esempio perfetto di riciclo intelligente. Anche l'ambiente di lavoro mi sembra accettabile; non vedo i sistemi di aereazione, ma spero che ci siano e che siano funzionanti. Bravi.

[@oyedeleadeniyi9401]

Hello, please how much is the complete manchine for roof and floor tiles

[@kotarakafeliks]

Write me on Whatsapp [phone]

[@zubutv.]

Awesome setup

[@nickyoung6431]

Where did you get the extruder

[@kotarakafeliks]

We are producer of this extruder.

[@vaibhavtholiya3096]

What is the use of second machine

[@kotarakafeliks]

Calibrator

[@sandipsutar3437]

Hello sir what is the pigments added to change the colour from black to red,,as you showed in the video,, and can we mix wood dust with plastic to make another project

[@kotarakafeliks]

You can do everything after you buy the installation from us.

[@sandipsutar3437]

Thanks brother,, but I am from India and we don't reach to you,,🙏🙏

[@sandipsutar3437]

And your project cost as written 68000euro that means one euro is almost 90rupees in India

[@sherifosman8594]

How much the hydraulic compressor, and if I want to make one how can I do it ,

[@kotarakafeliks]

It is better to buy a hydraulic station. The price is 6000 Euro. 80 liters per minute and 200 bar pressure.

[@awesomepeterproduction224]

@@kotarakafeliks hello how much is that machine and they moulds

[@kotarakafeliks]

@@awesomepeterproduction224 All machines for production cost 68000 euro.

[@awesomepeterproduction224]

My email address is [e-mail] so that you can send me the quotation of all the machine and different mould of the hydraulic press

[@bapobamogaleadmin7101]

@@kotarakafeliks I need a printed qoute for a time making machine

[@dragonden9227]

My question Is are these fire proof

[@kotarakafeliks]

yes

[@aomanchutube]

I feel like it should be made thinner so that it makes more money and is more useful.

[@mosesdavies8302]

How do I get the complete machine set? The melting machine and the press

[@kotarakafeliks]

Write me on email [e-mail]

[@ajayagarwal5759]

What is the weight per tile?

[@kotarakafeliks]

1.2 -1.5 kg. Write me on whatsapp [phone]

[@chitwanmaya9358]

i need this machain What is the global cost for a complete solution (extruder, compressor and everything needed) ? What kind of plastic can be used (plastic bottles) ? What temperature do you need to melt sand and plastic ? And is this expensive in electricity ? How much does it cost to create new mold ?

[@LEEADSTUDIO]

How can get the machine? Price?

[@md.mahmudulhasan2560]

what is the ratio of sand and plastic mixture?

[@kotarakafeliks]

70% sand 30% waste plastic.

[@martinkomora8762]

Kindly can get the name and manufacturer of the extruder and pressing machine

[@kotarakafeliks]

We are the producer of this machines. The installation costs 88000 euro with the moulds. We can make the moulds with a drawing or muster in Your standart/the standart is different in the countries/. Time to work-3 months.Installed power-20 kW The installation includes: 1.Specially extruder 2.Press machine 3.Calibrator cooler for the ready details The machine can make 60 pieces per hour. The making area is 20 m2 without warehouses. If You have any questions please send us.The produce time is two months . The line for the production of floor coverings and roof tiles is the same. Just change molds. There is also a difference in the plastic mixture because it can also be used petrified PET bottles. The installed power is 25 kilowatts, but the working consumption is about 10 kilowatts. The blending ratio is 30% plastic and 70% sand. Marble flour can also be used to better achieve the desired color. For paint, use is an oxide cement paint.. The cost does not include delivery costs. You will get a detailed video on launching and operating the machines. You need to specify what details you want to make. Our plant uses waste plastic as a raw material, which cannot be used for separation and recycled as a secondary raw material. For example, plastic bags, car plastics, packaging and much more. Plastic waste is crushed with a grinder or agglomerator of fine particles about 4-5 mm. They are then mixed with dry sand in a percentage of 50/50 in weight units. 0.1% oxide paint is added. The semi-honest mixture is then placed periodically in the curing extruder, which cures the mixture and it exits as a soft mass. With a certain dose is placed in the mold and the press presses the finished product. The product is then placed in a special calibrator to make it true and not deform. One cycle lasts about 1-1.5 minutes.

[@martinkomora8762]

Good morning from assessment buying the whole plant is so costy kindly what is the cost price of the extruder only including cost of frighter charges to kenya

[@kotarakafeliks]

@@martinkomora8762 the price is 25800 euro

[@femiakinyemi7168]

What is the price for hydraulic compressor and Extruder screw

[@princeverma4537]

Hello sir can you please help me this setup i is open

[@baeedward3480]

Can LDPE scraps like tetra pak scraps including aluminum be mixed with sands?

[@kotarakafeliks]

Yes. But without paper.

[@tdahes2662]

where can I buy this machines?

[@kotarakafeliks]

We are from Bulgaria. Write me on whatsapp [phone]

[@martinkomora8762]

Which company frabricate this kind of machine and the cost price

[@kotarakafeliks]

We are the producer of this machines. The installation costs 88000 euro with the moulds. We can make the moulds with a drawing or muster in Your standart/the standart is different in the countries/. Time to work-3 months.Installed power-20 kW The installation includes: 1.Specially extruder 2.Press machine 3.Calibrator cooler for the ready details The machine can make 60 pieces per hour. The making area is 20 m2 without warehouses. If You have any questions please send us.The produce time is two months . The line for the production of floor coverings and roof tiles is the same. Just change molds. There is also a difference in the plastic mixture because it can also be used petrified PET bottles. The installed power is 25 kilowatts, but the working consumption is about 10 kilowatts. The blending ratio is 30% plastic and 70% sand. Marble flour can also be used to better achieve the desired color. For paint, use is an oxide cement paint.. The cost does not include delivery costs. You will get a detailed video on launching and operating the machines. You need to specify what details you want to make. Our plant uses waste plastic as a raw material, which cannot be used for separation and recycled as a secondary raw material. For example, plastic bags, car plastics, packaging and much more. Plastic waste is crushed with a grinder or agglomerator of fine particles about 4-5 mm. They are then mixed with dry sand in a percentage of 50/50 in weight units. 0.1% oxide paint is added. The semi-honest mixture is then placed periodically in the curing extruder, which cures the mixture and it exits as a soft mass. With a certain dose is placed in the mold and the press presses the finished product. The product is then placed in a special calibrator to make it true and not deform. One cycle lasts about 1-1.5 minutes.

[@olukayodeolawepo3874]

Interested in the extruder,

[@kotarakafeliks]

Extruder for a molten mixture of sand and plastic 18900 euro

[@al-noorjuma261]

Where can we get more information ?

[@kotarakafeliks]

My email is [e-mail]

[@sangeethzanu1727]

Machine cost How much, how much place Required for machinary placing

[@kotarakafeliks]

42000 euro is the price. You need 100 m2 work please.

[@kodjoemmanuel5956]

Congratulation for this wonderful idea

[@sagargargate1016]

I have interstate the idea and how to invest the and send the Quotation of machine

[@kotarakafeliks]

write me on whatsapp [phone]

[@craigmorris3941]

Amazing product. Saving the world one product at a time. I am really interested in buying your machinery. What plastics can be used in this process? Thank you

[@kotarakafeliks]

We are the producer of this machines. The installation costs 58000 euro with the moulds. We can make the moulds with a drawing or muster in Your standart/the standart is different in the countries/. Time to work-3 months.Installed power-20 kW The installation includes: 1.Specially extruder 2.Press machine 3.Calibrator cooler for the ready details The machine can make 60 pieces per hour. The making area is 20 m2 without warehouses. If You have any questions please send us.The produce time is two months . The line for the production of floor coverings and roof tiles is the same. Just change molds. There is also a difference in the plastic mixture because it can also be used petrified PET bottles. The installed power is 25 kilowatts, but the working consumption is about 10 kilowatts. The blending ratio is 30% plastic and 70% sand. Marble flour can also be used to better achieve the desired color. For paint, use is an oxide cement paint.. The cost does not include delivery costs. You will get a detailed video on launching and operating the machines. You need to specify what details you want to make.

[@babacardiallo9124]

Comment faire pour obtenir ce genre de machine dpour fabriquer des pavés et carreaux en plastique. Je suis très intéressé.

[@kotarakafeliks]

Only the mold is changed. We also manufacture molds.

[@kotarakafeliks]

Wire me on whatsapp [phone]

[@محمدالزيدي-ز8ك7ذ]

ينفع هاذة لعمل بلشرق لوصط

[@elieboustros5709]

nice project but why should we mix plastic with sand ??

[@kotarakafeliks]

For greater strength, durability and durability. Like cement tiles, but now plastic is used as adhesive instead of cement.

[@elieboustros5709]

@@kotarakafeliks aha nice and what about the mixture ? 60%% sand + 40% plastic ?

[@kotarakafeliks]

@@elieboustros5709 No problem.

[@elieboustros5709]

what is the barrel length and diameter of the extruder ?

[@kotarakafeliks]

@@elieboustros5709 1600mm length and 240mm diameter.

[@DjomkamTchamgaMichel-qo1mk]

Ça c'est merveilleux Je veux acheter cette machine Ça coûte combien ?

[@kotarakafeliks]

The price for all instalation is 78000 euro

[@akashthapa7749]

Good job

[@obliviouspeople]

can you share technical design?

[@kotarakafeliks]

Yes!

[@christinesambou1176]

How can I get the machine

[@kotarakafeliks]

Write me on email [e-mail]

[@prafulbele3204]

how many cost plant in india

[@babacardiallo9124]

Comment faire pour avoir ce genre de

[@himalbasnet5177]

price of whole unit

[@kotarakafeliks]

79 000 US dollars

[@himalbasnet5177]

Ok what is % of the materials sand & plastic granul in this product.

[@himalbasnet5177]

Can we make roof & flour tiles too

[@kotarakafeliks]

@@himalbasnet5177 yes you only change the moulds

[@kotarakafeliks]

@@himalbasnet5177 50/50 %

[@femiakinyemi7168]

How do l get this machine and price please

[@kotarakafeliks]

My whatsapp is 00359888494116 or email [e-mail]

[@younousssow3757]

@@kotarakafeliks Please price?

[@Jagan9118]

good work

[@hothead8031]

Hi how can get one

[@kotarakafeliks]

write me on whatsapp [phone] or email [e-mail]

[@olukayodeolawepo3874]

Mixing ratio plastic/ sand?

[@kotarakafeliks]

50/50

[@raimmichaelkembou2375]

ça coûte combien pour avoir cette unité?

[@kotarakafeliks]

58000 euro

[@debebehailegebriel3166]

I am interested to buy the machine. Can you send me your quotation

[@kotarakafeliks]

Write me pleace on email [e-mail]

[@suleimanali5141]

Please send me the quatation of this machine. Here is my email: [e-mail]

[@isaacoladoye6645]

So much machine in the process

[@ekologi9753]

Андрей напишите как с вами связатся.

[@kotarakafeliks]

My email is [e-mail]

[@OwlTech333]

Bravo

[@baburaomirje971]

Sir what is the total project cost

[@kotarakafeliks]

68000 euro

[@donaldwilliams3189]

@@kotarakafeliks is there a website to see these machines?

[@himalbasnet5177]

Need this machine

[@kotarakafeliks]

We are produser. Write me on Whatsapp [phone]

[@k2b301]

Pleas can you help me i really need your help, i need to know the extruder machine, model or ref or any information and thanks alote . And nice work . Continue .

[@ziaurrahaman08]

Hi Andrew. Can we connect?

[@kotarakafeliks]

My Whatsapp is 00359888494116

[@msohailakber1]

I want to buy plz

[@kotarakafeliks]

Write me on Whatsapp [phone]

[@matiwosashenafi3769]

I want to buy it from your institution. Could you send me full address to write the letter

[@ekologi9753]

Хочу себе такую установку.

[@محمدالزيدي-ز8ك7ذ]

هاذا لعمل لم يتثر بي حرارت لشمس درجة ٤٥

[@kotarakafeliks]

my whatsapp is 00359888494116

[@divyanshukashyap4687]

I am doing my startup on same principle Can you plss explain the details of this machine if possible Plss Can have your contact detail plss

[@dhairyarajumrania2362]

contact me @9819498623

[@tesfayebirhane885]

@@dhairyarajumrania2362 do u have WhatsApp

[@ninatyler1114]

@@dhairyarajumrania2362 your number is not working are you in USA?

[@ataguadamsal5737]

I am Ataguad Amsal Mengistie from Ethiopia . your machinery is very interested ,,,pleas tale me the cost (in dollar)of your machine and how to deliver it to Ethiopia

[@kotarakafeliks]

Write me on email [e-mail]

[@hendikaf3525]

Informations/ data will be more useful than the musical effect. Too bad this could have been interesting.

[@kotarakafeliks]

I didn't understand what was unfortunate.

[@msindhlovu5383]

Hi

[@kotarakafeliks]

Hallo!

[@msindhlovu5383]

Andrey Kolev need your machine was wondering if we can discuss business

[@msindhlovu5383]

What’s your number or we do a Skype telegram FaceTime or what’s app call

[@gustavovillalobos4110]

Buenos dias como puedo tener mayor informacion de ustedes ,favor contestarme a mi correo me interesa adquirir parte de ese equipo estare atento ,tenemos una empresa que recupera plastico en colombia

[@kotarakafeliks]

Write me on my email .. [e-mail] or Whatsapp [phone]