The most beautiful and impressive project I've seen in years
@diyexplorer87284 жыл бұрын
Jaw-dropping VU meter project. The best project I ever saw in the first quarter of 2020. Good job!
@taunteratwill17874 жыл бұрын
"the first quarter of 2020" ???? You're way ahead of everyone? Whahahahaaaaaa!
@sinvaldocardoso3509 Жыл бұрын
Bom dia amigo Tem como você me manda o link desse equipamento pra mim pode comprar
@stephaneneron10 ай бұрын
Not VU Meter... Spectrum Analyzer... Not the same thing at all...
@jebronekitty3 жыл бұрын
I surprised there's nothing like this on the market. I'm definitely not doing my own DIY for this and I can appreciate the craftsmanship, but I wish there were similar products that were purchasable.
@joelpack27078 ай бұрын
This is the coolest display I've ever seen, and being a DIY makes it even more awesome. Thank you for sharing your gift with us.
@henrykzajac80014 жыл бұрын
I'm impressed that the light from leds is not "leaking" to other segments. Overall amazing project and great execution ;)
@bpark100012 жыл бұрын
He is exploiting the scheme that fiber optics uses to prevent light from escaping from the sides of a fiber.
@RasanSamarasinghe11 ай бұрын
Once I had the same issue when I was making a similar one. I had to cover lights using cellotapes to fix that issue. kzbin.info/www/bejne/eamWdqqGirCKZpI
@ВіталійСуровикін4 жыл бұрын
Была бы возможность поставил бы 1000-чу лайков,очень красиво это шедевр,супер!!!!!!!!!
@ChuckRayNorris4 жыл бұрын
that is one of the sickest things i have ever seen that is a must have for my home theater. INSANE!
@bo0tsy14 жыл бұрын
The creepy old guy with the trans am said the same at the Chevron.
@rumethsathnidu53934 жыл бұрын
where can i buy this
@stevenA444 жыл бұрын
I totally agree with you on that! I'm almost drooling over this. LOL Coolest damn project I have ever freakin' seen!
@dario42573 жыл бұрын
Man, I'm already in love with this as an idea but seeing you making it real. Its wholesome
@imjody4 жыл бұрын
This is freakin' incredible. I want one!!!! I don't think you'd have any problem selling these for like $750-$1000 a piece... You'd probably sell quite a few at $1,500 even. AMAZING WORK. This is absolutely BEAUTIFUL!! I would definitely buy a kit of this for cheaper than the aforementioned prices if it was closer to $500 or less; no question about it!!!
@BOBOY1624 жыл бұрын
I am selling it for 900€. Can be lower if more people would order them from me but right now it is just a few thats why i cannot reduce the price unfortunately.
@imjody4 жыл бұрын
@@BOBOY162 that makes sense! It's beautiful!!
@BOBOY1624 жыл бұрын
@@imjody If you are interested in having one you can email me on mining.germany@gmx.de
@oppof17pro572 ай бұрын
How can i buy this witch web site available this@@BOBOY162
@rokyanton33234 жыл бұрын
Welcome to another episode of if i had those tools :) Awesome work!! appreciate your effort! for those who reading this let's watch for another 30min 'DIY CNC Laser Cutter'
@MrPaullProductions4 жыл бұрын
This is amazing! Well... I will say one thing: KICKSTARTER. Sell it like Lego kit, all the parts in the box with the printed manual and video manual here, we would just need to assemble it :-). OMG I want it so much :-)
@infernofury55674 жыл бұрын
If he offered multiple sizes, thicknesses ("flat" for wall mounting, taller for a club or something, miniature (desktop) variants), I think this is a product that will be very popular!
@awesomeregularnormalguy9826 Жыл бұрын
I build this with my own adjustments for my wife's father. Thank you for the inspiration. Took me quite some time though.
@ObsequiousV44 жыл бұрын
One of the coolest pieces of tech I've seen.
@alexr36384 жыл бұрын
Это лучший и крутейший экв что я видел! Мастер гений.
@MrSonar20004 жыл бұрын
Схемку бы (
@andyo44624 жыл бұрын
Вот история повторяется.. в 70х-80х годах это называлось цветомузыка. Все прям были помешаны на лампочках под музыку моргающих, потом даже журналы были завалены схемами, а радиомагазины - комплектами для самостоятельной сборки.. даже я собирал, и для дома на транзисторах и для дискотек на тиристорах (тепловозных :)) И вот 21 век.. увидеть "живую" моргающую лампочку настроенную на определенную частоту - ДИВО ДИВНОЕ! Это не в экране компутра, нубука или селифона видеть.. ДА. Японские кассетные магнитолы с 3-10 диодами на табло ихвалазира вызывали у многих эйфорический припадок.. Что дальше ждать? Реинкорнации эры видеомагнитофонов? Винил уже в тренде.. если чО! ;) :)))
@andyo44624 жыл бұрын
Согласен с тем что автор "заморочился" с воплощением своей творческой идеи и у него всё получилось. Спору нет. Сама идея стара как мир. Данный видео ролик хорош для тематики "интерьерный дизайн". Моё мнение. С Новым Годом! :)
@alexr36384 жыл бұрын
@ak7719 ЭКВалайзер!!!)))))
@BLADIMIR27904 жыл бұрын
@@MrSonar2000 так там есть прошивка для ардуины , думаю вполне реально на основании её понять что куда подключать , а модули все видны на общем фото платы.
@nicasiosalongajr8604 жыл бұрын
The most beautiful spectrum analyzer display i saw.....i will built my own version too. Nice idea i learn from this.
@julientetrel10163 жыл бұрын
WoW ! Crazy work ! Love how all of this is clean made ! Good wiring, superb result. You should sell some of these !
@kevinconant20894 жыл бұрын
Should be packaged as a kit. Would love to make one for my classroom.
@TheSniper19644 жыл бұрын
In all seriousness that is about one of the coolest things I've ever seen,I'm 55 and seen quite a lot in life.. you should be very proud of yourself for creating such a work of art...and also quite seriously how much would you charge to have one built,assembled and shipped to me ??
@edthurber62654 жыл бұрын
I'll add my voice to the requests to sell this a complete kit.
@adalaminshak18124 жыл бұрын
Very very good
@AQUASURF4 жыл бұрын
I want this under my tv hooked up to my console... OMG PLEASE!!!!
@MikeSmith-fe3ng2 жыл бұрын
Best looking spectrum analyzer I’ve ever seen. I would pay a grand+ easily for that.
@southernsoundpulse4 жыл бұрын
Enjoyed even with the ads! What a craftsmanship, excellent!!
@tuetanitomaple4 жыл бұрын
THIS IS A REALLY COOL PROYECT TO DO BUT WITHOUT THE CNC LASERCUT IS KIND OF HARDER BUT IS AMAZING NICE JOB
@santinofmn4 жыл бұрын
A ton of patience and hard working, and perseverance, and creativity and technique, and... I'm tired just in commend... imagine in doing
@itnuts34963 ай бұрын
This is a MASTER PIECE, Should be kept in a MUSEUM ❤
@webmagician4 жыл бұрын
Классная цветомузыка, второй такой нет! Лайк однозначно, проделана хорошая работа!
@wernesto.4 жыл бұрын
а можете определить какой лазерный станок используется на видео для резки орг стекла
@The2Twister4 жыл бұрын
@@wernesto. спроси у автора, думаю на канале должна быть ссылка.
@АлександрМишекурин4 жыл бұрын
да
@deaultusername4 жыл бұрын
Bigger than was expecting with the dimensions. TechMoan would like this.
@Outland90004 жыл бұрын
So would beardyman...
@MrPruske4 жыл бұрын
thought the same.
@billymilligan01044 жыл бұрын
Это просто шикарно! Красота какая!😲
@InunNajiIzzuzzusuzzk3 жыл бұрын
H
@mghaisan11654 жыл бұрын
Mantap bang.. Sedikit saran ,coba ditambah heatsink/plat aluminium untuk meredam panas LED...overall keren dan bangga untuk +62😎
@deusanysantos70024 жыл бұрын
l almost cry seeing this amazing VU, if you choose other music, i think i can old the tears... amazing.
@x5x4 жыл бұрын
my first thought was " where can i buy it?". great work :)
@e2ki3994 жыл бұрын
same here :D
@robduncan28163 жыл бұрын
THIS is why i pay my internet bill. this might be the effing coolest thing ive ever seen
@naseerahmedattar24014 жыл бұрын
Excellent great very good experience nice job. God bless you and your family .Thankyou 💐💐💐💐💐 👍👍👍👍👍👍👍👍👍👍👍👍👍
@jacobcrane28304 жыл бұрын
Man I just got to say hands down everything about this video was simply amazing! Edits, craftsmanship, teaching... truly is inspiring. I think I'm gonna have to take a crack at it myself. Maybe even post my own video of me attempting to build off your tutorial and see where it goes.
@blizzardjesus4 жыл бұрын
If there is ever a precut/drilled, ready to assemble kit, I'll get one.
@kimyeonho84554 жыл бұрын
I run cnc and laser workshop so I can roughly figure out the cost when I see products. you could buy a boss stereo system instead building one of that.
@0813185269474 жыл бұрын
Seller contact sevenliu1@gmail.com
@hour2midnight4 жыл бұрын
I want this on my wall/room. This will be heaven after a long tiring day.
@Asdayasman3 жыл бұрын
So many people in the comments thinking this level of love and quality can be bought. It can't for what they're willing to pay.
@P8qzxnxfP85xZ2H3wDRV4 жыл бұрын
Should have made this from EndLighten T, which is a special acrylic glass from Evonik that is meant for light scattering when edge lit. In shops it also goes by the name of Plexiglas LED.
@MrXephone4 жыл бұрын
Light scattering for plexi is also named Back Light. It consist in "damage/scratch" the surface in a non-homogeneous way to counter the light exiting the panel with the distance. In such a tiny surface (aka 60mm here) is not needed. But for bigger panel/surface, it provide a nice and homogeneous light density all over the surface.
@pm17414 жыл бұрын
Not worth the extra cost. Enlighten T is a ripoff.
@russelllopez41714 жыл бұрын
IMO, the darkness that is on the edges gives it a 3D look and makes the columns look round.
@waltrautwhite81784 жыл бұрын
Wouldn't change anything. A homogenous light would make it look boring, compared to the current design.
@darac48414 жыл бұрын
Amazing, ever house should have one. Looked in to the price of parts to make in the UK, not that bad, but shipping anywhere would cost a far bit. But I will make myself one for sure already have price for the acrylic and wood, just sorting out the other bits. Keep on making such stunning things.
@sc0or4 жыл бұрын
I'd suggest to make the bottom out of marble, add some golden caps, and sell it for at least $2000-3000. It needs a big house. Sure, not for everyone.
@Прораб_Викторович4 жыл бұрын
I think you are a very cool specialist! You have very correct hands and serious thoughts in your head! Forgive me for my English.
@cjfaucett30672 жыл бұрын
I would love to have one of these. You should definitely make this available to sell.
@1prostov415 Жыл бұрын
Просто офигеный девайс. Автор крут.👍👏
@ПавелС-у1ф Жыл бұрын
Схему бы лучше дал. А то заморочился как на заводе, показал как круто он вырезает прямоугольники на лазерном станке, а повторить без возможности.
@huyked4 жыл бұрын
BEAUTIFUL! I've always loved spectrum analyzers.
@bestamerica Жыл бұрын
' big wow love that LED change color with music... beautifully LED home made project
@richa97194 жыл бұрын
Need to package and sell as a kit
@techoverloadx4 жыл бұрын
Absolutely, I'd buy one in a heart beat! Wish i had the tools to make one.
@TwstedTV4 жыл бұрын
I agree. - I want a 32-Band version
@MindBodySoulOk4 жыл бұрын
@@techoverloadx If it wasn't a gazillion dollars of course.
@gol10dr454 жыл бұрын
This is so bad ass. I want a few.
@gregoryhudson1234 жыл бұрын
Yes, I would also buy one off you..... That is amazing! Wow wow wow! 😎 👍🏻
@andreynesterenko41764 жыл бұрын
Очень крутая штука получилась, хочу такую же
@listofromantics4 жыл бұрын
I'd buy this in a heartbeat!
@ionutvali52954 жыл бұрын
Me too
@greenlantern11234 жыл бұрын
Me too
@kotogray83353 жыл бұрын
One of the most beautiful things I've ever seen...
@FLHTdriver2 жыл бұрын
That's a great project and great execution! Beautiful love it. This would be a wonderful kit
@PropPlanePat4 жыл бұрын
Agree with everyone else, dude this is a fantastic project and an incredible result! Great job!
@bpark100012 жыл бұрын
Please beware one thing about laser cutting acrylic plastic: the cutting process is thermal & leaves built-in stress in the parts. Later, these stresses may cause the parts to crack, especially around holes. The solution is to bake the parts after cutting out, slowly heating them to just under the softening point (where the stresses relieve), then slowly cooling the parts back to room temperature.
@Dr_Xyzt2 жыл бұрын
You're overthinking it. I don't have access to a laser cutter. All I have is a table saw. If I were to make this assembly, I'd consider sending the parts out to be cut on a WaterJet. It'll leave a matte finish on the edges which can be painted to change the performance characteristics. Another option is to use a disc sander to trim the edge of the cut. Another great option is to send the job to a machine shop. A carefully planned cut sequence will leave interesting tool marks in the edges of the cut.
@Dr_Xyzt2 жыл бұрын
@@bpark10001 That was a pretty sweet pdf link! Thank you. -- I apologize for my earlier comment. I see what the deal is here. When we cut the material, each cut leaves a tiny stress riser, even if I use a nice sharp flycutter with a wiper insert. If I take the part and bend it, then it should fracture right at one of the tool marks. -- I do want to try my disc sander idea. A bit of soapy water is all it requires. -- As for machine shop work, I wanna try an experiment with a small piece. Drill two holes with a 2-flute endmill. Climb cut the other side with a downcut endmill. Flycut another side. Oven cure one piece, leave the other one as-cut.
@bpark100012 жыл бұрын
@@Dr_Xyzt OK. What happens is that the plastic melts in the cut's surfaces, the same as if it were laser cut or "flame polished". The melted plastic cools & shrinks, but is prevented from doing so by the surrounding non-heat-affected plastic. The surface is in tension, where defects are present to start cracks. The worst cuts are the ones that leave sharp "inside" corners, from which cracks grow. Modify geometry to avoid these (for example, for clock gears, put a radius in the tooth roots & on top of the teeth). Keep tool speeds LOW & keep tools SHARP. You can laser cut. The trick is to heat the whole sheet to annealing temperature BEFORE the cut. (You will need to scale up the part to account for expansion). You can see the stress by getting polarizers (cheap pair of polarized sunglasses, remove the lenses, set crossed so is dark to transmitted light, put the acrylic between). If stress, you will see dazzling colors). After anneal, this color will disappear & will remain dark.
@abohobyteknik1949 Жыл бұрын
Perakitan yang cukup rumit tapi hasilny menakjubkan, good job
@wormaus-mixed4 жыл бұрын
I jsut remeber, when i see this, in the 80'th i build such toys (not so big and expensive in tech) at the analog way with transistor, condensator, resistor rows and bandpass filters ... 40 years later "its modern" ... :P
@fredk29614 жыл бұрын
80'th? hobbyists were building them in the 60s with painted lamps and projecting on the walls.
@amirismail81714 жыл бұрын
The built quality is god !
@redneckrambo37942 жыл бұрын
That’s a awesome build man I came cross this looking to learn new things I’m about to try to build my own stereo system for the house using a car stereo. Having one of things you just build would look great with it I think I might try to build one them as well. Great video great work
@azhandsum112 жыл бұрын
It;s Soooo pretty...I can't take my eyes off of it ! Absolutely the best by far.
@iburbon4 жыл бұрын
#Гайверсделай а ну-ка лайкаем чтобы Саня заметил 😏😉
@iburbon4 жыл бұрын
@KoSteT нравятся его супер подробные видео.
@MrZorro4414 жыл бұрын
@@iburbon куда уж подробней то ....
@iburbon4 жыл бұрын
@@MrZorro441 люди как видишь лайкают. Значит хотят такой проект от сани. А то он свой эквалайзер забросил🙁
@Dobry-Ehh4 жыл бұрын
Пластины из акрила, меньшего размера 4×6 обойдутся 12.000р, если делать самому, из эпоксидки то 7000р, но мля 280штук лить..
@syorezko4 жыл бұрын
@KoSteT тут не каждый сможет повторить, так как всё разбросано, тот кто шарит найдет, или покупать его модуль на ебэй за 70 бачей, а кайвер разжуёт для каждого
@likulakuku4 жыл бұрын
when you will sell it to public.. i'm interested...
@0813185269474 жыл бұрын
Seller contact sevenliu1@gmail.com
@charlespetrosky20392 жыл бұрын
@@081318526947 would love one of these. Do you see and if so how much They are awesome
@alexbke19714 жыл бұрын
Возможно и часы сделать . Чтобы не просто стояли когда музыки нет , а время показывали ;)
@MrCORRE282 жыл бұрын
desde Venezuela Valencia estado carabobo. felicitaciones... Excelencia en Mística y presentación .eres un artista. en diseño. trabajo. y acabado ..que sigas triunfando hermano .. seudónimo corre
@BillBard4 жыл бұрын
Man this reminds me of the good old Winamp days!
@DeepThinker1934 жыл бұрын
This build is so easy, I can do it in my dreams...only in my dreams.
@dimon._72474 жыл бұрын
гайвер в истерике бьется. Наикрутейшая вещь. You a cool dude!
@alicamping243 жыл бұрын
Please let me know if I can make it 12 bands and the LED length is 2M each.^^
@juniorborges96303 жыл бұрын
a cada vídeo que vejo seu me surpreendo mais e mais...parabéns ainda é pouco diante de tanta sabedoria e criatividade
@ПавелК-б8э3 жыл бұрын
Классный светодиодный эклавайзер))) Хочу такой же собрать! Спасибо за идею! ))
@eugenxxx19783 жыл бұрын
Конструктор ))
@Алексей-з5в8щ3 жыл бұрын
@@eugenxxx1978 Можно ли купить конструктор, для самостоятельной сборки?
@one-o-four8893 жыл бұрын
Platinum: Make this yourself First step, laser cutter. Me: D'OH!
@bandido79943 жыл бұрын
From a DYI person here, it can be done with a regular drill and a jigsaw. More effort but is worth the pleasure of doing a project like this, the only thing is that acrylic is expensive.
@kryptofever2 жыл бұрын
The wiring looks really difficult... but you make it looks so simple... It looks amazing, and hypnotic..... You should open a shop - as I'd buy one......
@GaitaPonto4 жыл бұрын
love it. I would only change the base for a nice wood block and get rid of the "spectrum analyzer" label
@johnsumner29874 жыл бұрын
This is awesome. I would have loved to have one during my raver years in the late 90s.
@lionlight7774 жыл бұрын
45 years myself.. Still love EDM.. we started this ....
@keremkirsinli42124 жыл бұрын
Congratulations for the best thing I have ever seen in my life... i can't wait for new studies :D
@alitopan87883 жыл бұрын
Mantap pokonamah dengan disain terbaik bahan"nya pun mantap kualitas nya yang terbaik
@EGORka1407644 жыл бұрын
Beautiful project. I wonder how much everything weighs in assembly? Acrylic layers the best solution from the previous project ! :)
@vesvalornikas80003 жыл бұрын
Шикарное зрелище! Браво!
@_SOON_4 жыл бұрын
1:25 those blocks at the start of the vid is kinda cute.. [ㅇㅁㅇ]..
@thenyfleamarket20984 жыл бұрын
WHERE TO BUY ?????
@vales85344 жыл бұрын
xdxddxd
@NoxUmbrae4 жыл бұрын
Pareidolia.
@TheNutnut694 жыл бұрын
@하루 indonesian
@mathieudu402 жыл бұрын
The end is mesmerizing. I don’t even allow myself to blink 😯
@plixx48154 жыл бұрын
This would also look nice in a club. Thought you could sell some of this. How ever, really gread work
@vagnerferreira72483 жыл бұрын
Como sempre seu trabalho e top sempre vc da um show no que faz parabéns 👍👍👍👍🇧🇷
@omentep4 жыл бұрын
My inner teenager is screaming "take my money!" Damn cool project sir.
@karimkharoubi57623 жыл бұрын
6
@navjotsinghdhimaan89973 жыл бұрын
Awesome mind blowing job God bless you 🙏🙏🙏🙏🙏
@Drxxx4 жыл бұрын
Amazing project!!
@U.F.O.Technology4 жыл бұрын
Yes it is more expensive than the Eiffel tower.
@wtmf804 жыл бұрын
I'm going to build this.. I've already sourced all the parts I'll need and it'll be about $300 all in.
@logicmp44 жыл бұрын
@@wtmf80 how you doing on it is it In the process of being built or?
@wtmf804 жыл бұрын
@@logicmp4 I'm still waiting on the module and other parts to be delivered, but everything is ordered.
@d00mfish4 жыл бұрын
@@wtmf80 sou you bought the controller from ebay? Thinking of buidling that one myself. That will probably be the most difficult part of it
@wtmf804 жыл бұрын
@@d00mfish Yes I did buy the controller module from ebay. It's being shipped from Indonesia so not sure how long till it gets here. It left Jakarta this morning. I was thinking of building the module myself as well, but after sourcing all the parts to build it, the price on ebay is good enough to just buy it already built.
@sorinlazar65503 жыл бұрын
Hello! I would like to buy, is it possible? How much does it cost?
@tungduong25993 жыл бұрын
How nice if one side of your entertainment room installed a system like this.... beautiful
@MrSolar.4 жыл бұрын
2 Thumbs up, 2 Big toes up and 1 Tally wacker at full attention!!! Totally over the top awesomeness!!!
@shawnlarsen47534 жыл бұрын
:))))
@mikymuky11714 жыл бұрын
22:30 is my favorite. The gold is really nice
@jaydawg78204 жыл бұрын
Man, that is just about the Coolest Damn Thing !
@faizansiddiqui14414 жыл бұрын
All Best and good luck new project build
@rizwanrafeek38114 жыл бұрын
Recording studio would love to have one like this. Gee, it looks awesome.
@Jacson41004 жыл бұрын
I want one of this so bad!
@IAG-Co-Ltd4 жыл бұрын
Also. I think this has promise in the Pro-A/V world, with DJ setups :)
@stephaneneron10 ай бұрын
Woooo.... That is one of the coolest thing I've seen so far on KZbin. Thanks for sharing it...
@malinyamato22914 жыл бұрын
I am an audiophile and THIS is the most amazing thing I have seen on the youtube ever. Marry me and bring this over!!!!!
@davidtemistoclesgarciaespi39383 жыл бұрын
Pñ
@davidtemistoclesgarciaespi39383 жыл бұрын
Qqq
@timeylies3 жыл бұрын
@@davidtemistoclesgarciaespi3938 r/ihadastroke
@RiyaSingh-gm7cg3 жыл бұрын
Lol
@belikstas3 жыл бұрын
How much money need to build one? Exelent job. I need one!
@fernandomorenosr.210 Жыл бұрын
amazing project, I am a fanatic of music. I would love to make one of these. Do you sell the layout pattern for the cutting out of the acrylic pieces? if you do I may be interested. You do great work.
@PLATINUMKIT Жыл бұрын
Please check in description
@karlaverdera350411 ай бұрын
Beautiful and very creative. This is perfect execution ❤❤❤❤
@AQUASURF4 жыл бұрын
Awesome but, who has that machine in a garage - so ... how much it cost If I wanted one delivered ?
@redrooster19084 жыл бұрын
@brainbah look in the see ?
@Stephan94xD4 жыл бұрын
@@redrooster1908 go on the video description
@bawaslutebingtinggi93 жыл бұрын
i think this one is more cheaper: kzbin.info/www/bejne/oJunnaysrch-m80
@marcosgiovanni96824 жыл бұрын
Shares the complete code with the tuning buttons and circuit board. Do you sell only the code and circuit board?
@PLATINUMKIT4 жыл бұрын
you can download arduino code in part.1 video. if you want complete spectrum module can buy at ebay.com please check in the description
@atomipi4 жыл бұрын
@@PLATINUMKIT v2 arduino code link for me to try a build?
@alphakernel14 жыл бұрын
would be cool to add scrolling text like track title or whatever. maybe dancing shadow figure effect
@2HAMMERS13 жыл бұрын
I LOVE THIS This is a MUST HAVE { boys and their toys } { women . . . well. . . . they just do not understand is all } I do not own any of the tools used for this build. Could I buy this? The cost of tools for a one time build doesn't merit ownership of this amazing build.
@adisharr4 жыл бұрын
This one of those things that I look, think it's cool, buy it, and wonder wtf did I just spend money on.