Plaxis 2D V20: Lesson 15 Free Vibration and Earthquake Analysis of a Building

Plaxis 2D V20: Lesson 15 Free Vibration and Earthquake Analysis of a Building
#Plaxis #Geotechnical #Engineering #Dynamic
To download earthquake data for this tutorial, go to communities.be...
Please subscribe to my channel / engineerhunter
Check Plaxis 2D V20 tutorial playlist here
• Plaxis 2D V20
After installation, you can find Plaxis 2D V20 manuals in C:\Program Files\Bentley\Geotechnical\PLAXIS 2D CONNECT Edition V20\manuals.
PLAXIS is program that has been developed specifically for the analysis of deformation, stability and flow in geotechnical engineering. The input procedures enable the enhanced output facilities provide a detailed presentation of computational results.
Plaxis 2D V20 full videos:
Playlist: • Plaxis 2D V20
Lesson 1 Case A, Settlement of Circular Footing on Sand • Plaxis 2D V20: Lesson ...
Lesson 1 Case B, Settlement of Circular Footing on Sand • Plaxis 2D V20: Lesson ...
Lesson 2 Submerged Construction of an Excavation • Plaxis 2D V20: Lesson ...
Lesson 3 Dry Excavation Using a Tie Back Wall • Plaxis 2D V20: Lesson ...
Lesson 4 Dry Excavation Using a Tie Back Wall - ULS • Plaxis 2D V20: Lesson ...
Lesson 5 Construction of a Road Embankment Part 1/2 • Plaxis 2D V20: Lesson ...
Lesson 5 Construction of a Road Embankment Part 2/2 • Plaxis 2D V20: Lesson ...
Lesson 6 Settlements Due to Tunnel Construction • Plaxis 2D V20: Lesson ...
Lesson 7 Excavation of an NATM Tunnel • Plaxis 2D V20: Lesson ...
Lesson 8 Cyclic Vertical Capacity and Stiffness of Circular Underwater Footing • Plaxis 2D V20: Lesson ...
Lesson 9 Stability of Dam Under Rapid Drawdown • Plaxis 2D V20: Lesson ...
Lesson 10 Flow Through an Embankment • Plaxis 2D V20: Lesson ...
Lesson 11 Flow around a Sheet Pile Wall • Plaxis 2D V20: Lesson ...
Lesson 12 Potato Field Moisture Content • Plaxis 2D V20: Lesson ...
Lesson 13 Dynamic Analysis of a Generator on an Elastic Foundation • Plaxis 2D V20: Lesson ...
Lesson 14 Pile Driving • Plaxis 2D V20: Lesson ...
Lesson 15 Free Vibration and Earthquake Analysis of a Building • Plaxis 2D V20: Lesson ...
Lesson 16 Thermal Expansion of a Navigable Lock • Plaxis 2D V20: Lesson ...
Lesson 17 Freeze Pipes in Tunnel Construction • Plaxis 2D V20: Lesson ...
-------------------------------------------------------------------
Donate me: / engineerhunter
Join membership: / @engineerhunter
KZbin: / engineerhunter
Facebook: / engineerhunterse
Instagram: / engineerhunter
TikTok: www.tiktok.com...
Contact me: [e-mail]

[@erickhuamaniestudio926]

Hi, please, would you share us the earthquake data "225.a.smc"? by a link, or a onedrive or similar please, the matter is the link you wrote is not available anymore, we will be grateful with you. Thanks. By the way, it was a great video.

[@soviethammer9111]

When I run my dynamic analysis, the side boundaries get deformed way too much and cause the analysis to fail. Any tips on how to fix this?

[@ShadmanRahman-h9i]

My dynamic line displacement option is locked. I cannot figure out why, could you please help me?

[@ciciinfant2121]

please tell how to get the Material Properties of the building such as EA and EI

[@mymai-f5q]

How to get safety factor of earthquake phase?

[@ayacherassoul98]

i can't get the earthquake data file.

[@omer6529]

I can't either. Will you let me know when you get it?

[@ayacherassoul98]

@@omer6529 okay

[@syedhasif8956]

how to get the smc file for the earthquake vibration

[@EngineerHunter]

You can check the link in description.

[@hiennguyenthe5476]

@@EngineerHunter many thanks !

[@zethrumahtita6107]

how can i make a building in this Video sir?

[@EngineerHunter]

You can make assumption and get the stiffness of superstructure then modeling in Plaxis by inputting those stiffness in the material.

[@civilengineer6937]

Hi, please, would you share us the earthquake data "225.a.smc"? by a link, or a onedrive or similar please, the matter is the link you wrote is not available anymore, we will be grateful with you. Thanks. By the way, it was a great video.

[@ShadmanRahman-h9i]

My dynamic line displacement option is locked. I can't figure out why, Can you please help me?