PLC Training - SLC 500 Scaling - Part 1

[@kabilslimen4701]

Thank you

[@kingofslotsmillion3263]

Can you show this in a more practical way. Like scaling a 10 volt analoge input . And converting that to a 10 volt out pit

[@PLCMentor]

It gets difficult because your scaling depends very much on your I/O. Just because you have a 0-10VDC signal coming into the PLC doesnt mean it is represented easily in the PLC. This video is actually a step back from the concept you mention to just understand what the scaling function does without confusing the issue with what analog input card you are using. We get into those concepts in our later videos.

[@yassinechannel3166]

Hello sir i want to ask you how i programm a thermographic camera with rslogix 500

[@dhinzmuerong5230]

i have problem slc500 input module and input module not commnunicate to plc what is the posible cause?why pls help for this error thanks and advanced

[@PLCMentor]

+Dhinz Muerong I think our forum at PLCMentor com would be a better place for a discussion such as this. There is a lot of back and forth that would be necessary to try and answer this question. Is your module rack mounted, what kind of module is it, what makes you think it isnt communicating, etc, etc.

[@dhinzmuerong5230]

+automationnc analog output module and input module, 1746-n041 and 1746-ib16 that is the type of module

[@amp550]

Could you tell me..how to download link for rslogix500

[@chappagiridhar5109]

Yes bro I will tell you

[@mohammadshahid914]

Hi ! can you add a tutorial for PID setup and control. Thanks

[@PLCMentor]

+Mohammad Shahid We did a couple classes in our Stage 3 web class that cover PID for the RSLogix5000 processors on our PLCMentor site.

[@JCRegalado84]

excelente video

[@eshmarajan9836]

Is there a video on AB Micrologix 1100 PID instruction. Seems like not many people have an understanding of that instruction. Its been a mystery as I have looked for 2 days on the internet an no one seems to know about it. The AB Micrologix manuals are not a great help either. I would appreciate if you could make a video about it. The closest one was from BTC instrumentation but it does not tell how the instruction actually works. Appreciate your work!!

[@PLCMentor]

I haven't done a video on micrologix PID. We do have a couple hours in a web class on controllogix PID. Also I would be happy to cover PID for the micro in a web class if anyone were to bring it up.

[@kingofslotsmillion3263]

Can u help me program a delta motion control for a proportinal valve 10vdc and have it communicate with a 1400 r

[@anuvaidyan4473]

Thanks

[@adambodom]

:)

[@pelatihanotomasi3442]

Thanks