Plow truck maintenance

[@williambryant8379]

I knew as soon as I heard him say he got a new radio for his truck the chainsaw was coming out

[@Bobbywolf64]

I love his radio installs, lol. The "make it work, screw everything else" attitude is just great.

[@bjholah1]

Truth be told, I thought you were joking, for about 35 minutes. Biggest laugh this week I predict.

[@syopspwnz]

Wow I must be too new here - I was NOT expecting the saw to come out. Though I think the paint marker should have been all the foreshadowing I needed.... "Huh strange, he's marking it in situ...."

[@davids1033]

Two chain saws on bench for u joint repair. Andrew providing a little foreshadowing.

[@thekeatons4]

I got a grin on my face when I heard him say "new radio install"! My favorite line.... this new radio has ummm ummm it doesent have faceplate that keeps falling off! LOL

[@evanbluemer5119]

"the previous owner hacked up the wiring" as he cuts the dash apart with a chainsaw....love this guy

[@vampirwrr]

I almost spit my tea when i heard that just after chainsaw action

[@INORBET]

👌🏼👌🏼

[@gojo7655]

What the hell Never seen anything like that

[@Spatzenterror]

the normal kind of dude would use a fein multimaster instead of a stihl..

[@Bediasman]

Wonderful 🤣🤣🤣

[@superjakoboy]

When you said 'new radio' I was hoping for a chainsaw guest appearance and you didn't disappoint

[@user-bj2br6id4e]

Me Too😂😂😂

[@bigpoopy4272]

@@user-bj2br6id4e lmfao i was thiinking the same thing

[@markconger8049]

Radio comes free with the chainsaw I think :)

[@warrenmichael918]

I was thinking about the last chainsaw trick but i said to myself , he wont do that again! WRONG......haha

[@christosmitsogiannis9960]

In which video used the chainsaw again for a radio install?

[@94OmarGarcia]

A must have at all times at the shop list: Sludge hammer. Self tapping screws. Pipe wrench the size of a fiat.

[@gregkobbeman5899]

You forgot chainsaw lol

[@jamesnm21]

WD 40 and Brake cleaner

[@elinoamrichter162]

self tapping *hex head* screws. because we all know philips head self tappers strip for no reason

[@jmmass3264]

Takes a chainsaw to the dash-“the previous owner hacked this wiring” 😂

[@ubangiestomp]

I believe he just ONE-UPed the previous owner. 😂😂

[@seank9643]

And a few minutes later... "Truck got full of plastic somehow 🤔"

[@Cody114.]

Dude I’m dying rn

[@taylorfraser988]

Haha!!! 😂

[@tooljunkie1937]

Lmfao!!!!

[@ebenclukey7293]

The wife said if I don't stop watching Andrew Camarata digging holes and welding stuff and spend that time with her, she's leaving me. I'm gonna miss her. When he brought the chain saw in to the cab to customize the dash, I re-stated my vows of support.....FOREVER. Greetings to all my brothers and sisters of AC NATION.

[@candace3676]

Sweetie won me over! The couple that watches Andrew together stays together!

[@turbocat1984]

@@candace3676 If I had a boyfriend he'd get worried real quick haha

[@gwgrote5]

@Drew Earthling: that's hysterical!!

[@chrisbull2448]

"I think I can straighten it out with a wrench" - Proceeds to get out a giant two handed wrench of legend

[@markconger8049]

I think that is called a Stilson wrench. My dad had several, most of them he found on the highway because people kept forgetting to take them off the bumper after use. But the one Andrew had there is ginormous.

[@ZGGordan]

My forklift is smaller than that thing 🤣

[@NoWr2Run]

@@markconger8049 If THOR had a wrench, this would be it, LMFAO.

[@xcalibertrekker6693]

You don't know much about tools or wrenches huh.

[@d.pierce.6820]

I used TWO of those 48" long wrenches when I was a Pipefitter-one to loosen/tighten, the other to as a "hold back" to keep everything else from moving.

[@awdken6]

“that’s a pretty professional radio install right there...” LMFAO, that was gold!

[@edbenson98]

14 carat!

[@ja1a100]

The previous owner hacked up the wiring, right after you performed chainsaw surgery to dash. classic Andrew!

[@dbriggs1689]

"The faceplate doesn't fall off of it thats what its got" comment was legendary!

[@ExperimentalFun]

If you didn't expect the chainsaw, you haven't been watching long enough. lol

[@TheRobman]

I was like "please, no chainsaw this time" lol

[@seantap1415]

True that.

[@jameshogue1639]

Radio installs come with a standard Andrew accessibility hole.👍

[@GlobalistJuice]

Still wasn't ready for it... it got an IRL lol out of me!

[@forthrightnight]

I was just watching and started thinking, "This is right up there with the chainsaw vid." I had to pause and check out the comments. Cheers.

[@niklas10101]

"Its got ... i Dont know, the face plate doesnt fall out of it, thats what its got."

[@BassManNv]

Got flashbacks of my anti-tech elders in that. I laughed so hard.

[@MartinHallis]

"It's a nicer radio, it's got... I don't know, the face plate doesn't fall off of it, that's what it's got" Haha.. made my day with that comment. Great video as always.

[@jacksak]

Funniest comment of the new year...

[@Freundm30117]

I feel sorry for the poor SOB that Googles “Dodge truck double DIN radio install” and finds out that he needs a chainsaw!

[@atnfn]

You can always use a sledgehammer if you have no chainsaw. But the install won't have quite the same professional look to it.

[@BGCONTRACTINGLLC]

DAD!!!?!?!? I need to borrow the chainsaw!!

[@operculum]

I feel sorry for the vice

[@BGCONTRACTINGLLC]

@@operculum nah... if it was junk Andrew would have told us by now. Lol.

[@emkayusa]

Who doesn’t have a chainsaw? ;) I have the minimum required amount, 3, Andrew has enough to create a chainsaw museum. They have so many uses!

[@ericball6894]

"that's a pretty professional radio install right there". God I love this man

[@fornsphin]

"They didn't give you anything to mount this." They probably didn't expect you to mount a double din radio in a single din truck with a chainsaw.

[@MaximusMerideus]

Hey burn, what is a double din and single din? Probably a dumb question but I figured I ask. Thanks-

[@fornsphin]

@@MaximusMerideus Single din and double din refer to the size of the radio. Single din radios are 2 inches high, and double dins are 4 inches high. Single din is a typical radio, the size that will typically be in older vehicles. Double din is basically just a double tall radio, which is a common size for touch screen radios.

[@MaximusMerideus]

@@fornsphin My friend, thank you for responding to my question. I learned something new. Burn Victim Yoda, I hope you and you family have a healthy and prosperous 2021.

[@JanDreier-HH]

@@MaximusMerideus It is actually DIN (Deutsche Industrie Norm) and goes back to the early 80's when the all the German car makers, plus electronics firms like Bosch, Blaupunkt, Pioneer et al got together with the Deutsches Institut für Normung (Germany Institute for industrial Norms) and set out to define a common slot for car radios (including common connectors) to make radios compatible to all car brands. www.lifewire.com/what-is-a-1-din-car-stereo-534607

[@MaximusMerideus]

@@JanDreier-HH Jan, my friend, thank you for that interesting information. That makes a lot of sense now. I appreciate you taking the time to help. I wish you and your family a very safe and prosperous 2021 and beyond. -

[@anthonyanderson1954]

"the previous owner hacked up the wiring". After Andrew took a chain saw to his dash. Love this guy!!!

[@haydenmedgyesy5674]

“Previous owner hacked up the wiring” bruh you literally opened up your dash with a chain saw. Love it 😂

[@cissa95]

The moment he said he needed a new radio I started smiling.

[@pear7777]

Ahhh spoiler alert, I'm at 02:00 ..

[@r2d2326]

AvE is saying you stole his chainsaw gimmick. Lol I’m saying Crutchfield has a dash kit for that truck for $15 🤣

[@ronarmstrong8585]

Andrew, ill bet you cant wait to get your lift enclosed. But kudos to you for still getting things fixed in the cold.

[@AndrewCamarata]

Working on that right now

[@HuntingWales]

"previous owner decides to hack up the wiring" takes chainsaw to the dash again. I love this guy.

[@ThatPsillyDude]

Came here to comment these exact words ☠️

[@chefdan87]

I remember when he first bought this truck. I also remember what it looked like when he bought this truck. Lol, its now a signature limited edition Camarata Dodge.

[@glenjamindle]

When he pulled out the double din radio for a single din hole....I smiled because I knew what was coming :)

[@agger838]

"They dont give you anything to mount this" Lol i wonder why

[@twadam5218]

OMG 34:53 ! That is why we lover Andrew. I never laughed so hard at the precision in measuring and using the right tool for the job!

[@batterpm11]

I appreciate the fact you can take a chainsaw to your dash to install a radio but still have the decency to vacuum your seats.

[@Teddy_is_ready]

He always cleans up after his work. If I have someone doing work at my house and he does not clean up, he never gets called back.

[@jtparker4978]

"The truck got full of plastic somehow" 🤣

[@the_darkgameryt]

🤣🤣🤣 yeah

[@joe_preston]

That's how you know he's not an electrician!

[@joshdupont2209]

@@Teddy_is_ready if I was contemplating calling this guy for property maintenence and saw this video. I wouldn't be calling him lol. I enjoy the videos but wouldn't let him get close to my stuff. Lol

[@peyton240]

“It’s got I don’t know the face plate doesn’t fall off of it that’s what it’s got”😂

[@KenMrKLC]

I scrolled the comments looking for this, I was going to say same but I knew someone else did already. Classic, Andrew knows his comedy niche and how to use it just right

[@ianeddleman4172]

"A previous owner decided to hack up the wiring..." Literally right after he used a chainsaw to cut a hole in the dashboard 🤣🤣

[@TheRobman]

The previous owner is watching this video yelling... NO !!!!!!

[@bannablitz247]

The difference is that andrew says forget cosmetics, functionality is where it's at. I mean come on did you see his manual blend door? Vents, defroster. All ya need and now mechanical instead of electronic.

[@johnmarston2527]

You're new here aren't you? He's done it before.

[@ianeddleman4172]

@@johnmarston2527 not new here, it was a joke 🙄

[@BackyardMechCon]

Ha ha! Was going to say the same myself only I was thinking of the next owner " the previous owner decided to hack up the dashboard..." 😂.

[@randallhutchcraft4039]

It's a beautiful thing to live like you haven't any worries at all, and can accomplish so much. Andrew camartara is number one in the world of video.

[@Gotenham]

The total commitment to practicality over looks is impressive

[@tomaskaizeler]

Andrew every time something isn't straight: " Hammer Time!"

[@pembroke6740]

I'm not straight, is he going to hammer me¿

[@pembroke6740]

I'm not straight, is he going to hammer me¿

[@tzer7296]

@@pembroke6740 My thoughts exactly

[@hammer9185]

hahaha or chain saw with the radio

[@tomaskaizeler]

@@pembroke6740 You might wanna have dinner first.

[@dahak972]

“The faceplate doesn’t come off, that’s what it’s got”. I love it. Great video, thank you!

[@halfwolfl5241]

Cheers to an amazingly capable and completely unflappable guy. I came to see the castle being built and find myself in awe of your ability to tackle pretty much any mechanical task. Kudos!

[@DingleyDell]

My day becomes a great day when Andrew posts a video. Always great to see Cody and Levi too.

[@tzerambo3140]

“That’s a pretty professional radio install” after cutting the plastic trim out with a chainsaw 😂😂

[@spacezombe]

The Most epic thing I've seen all winter...

[@ricovali9245]

That was badass

[@_V1LKA5_]

You haven't seen the radio installs in his other trucks have you? That's a signature thing that Andrew does.

[@spacezombe]

@@_V1LKA5_ lmao excellent

[@neilaturner]

"That's factree", as Derek @ VGG would say!

[@zohanrock]

"The faceplate doesn't fall off on it." Best product endorsement.

[@analog56x]

hey Andrew, im a bit late to this party, but i watch at least one of your videos a day haha :P anyways, for getting the hub assembly out of those dodges, i usually jam a socket between the ear of the ujoint and the axle tube, then fire the truck up and steer into the socket. it ends up pressing the hub assembly out :) usually just takes one good push on either side and they fall out. for the exhaust hangers, i grab wd40 and spray a bit inside the rubber hole, and the hanger will slip right in/out. i know it was cold AF, but it should still work haha! love seeing these maintenance videos. ive tried to weld up small leaks on things before, and it is incredibly difficult haha! i usually end up chasing the leak around for quite a while. cheers Andrew!

[@AndrewCamarata]

That is a good tip to remove the wheel bearing. Thanks.

[@AnthonyAntTony]

The amount of stuff Andrew fixes with pure brute force..

[@23bobjr]

its old school. If it worked back in teh day, it will work now without all the fancy stuff

[@jeffwilson1399]

"The previous owner decided to hack up the wiring. . . . " The current owner decided to hack up the dash . . .

[@aidanf2248]

The current owner decided to hack up the whole truck

[@Gabbrrys]

This comment tho .. 😂😂😂

[@Steinerrides]

@@aidanf2248 tbf the whole truck was hacked up by the pervious owner too

[@step2191]

when the truck was made they barely had double din radios, only in high end vehicles at the time.

[@klevewoodward7602]

For someone who is as rough as guts. You do a great job filming and getting good angles for us Great work

[@MarkWilliams-vp7xw]

Self tappers, chainsaw,sledge hammers, pipe wrenches,welder. Just amazing work my friend

[@casycasy5199]

with all the metal work you do, i cant believe you never thought of ripping the bed off your truck and making your own

[@charlesbenson8180]

That's what I keep on thinking but then again he'd be like "Why? This one works with minor maintenance and I can fix anything on this bed with nothing but a hammer and some screws."

[@justbartee]

Exactly what I was thinking.... It would NO surprise !!!!

[@MustObeyTheRules]

@@charlesbenson8180 he could make one that takes zero maintenance

[@charlesbenson8180]

@@MustObeyTheRules True. Well either zero maintenance or a bed that only needs a hammer to fix. ;D

[@buckzillakiller]

Good to see our old buddy Levi still on the Job, say woof for me.

[@mattiascbenetti]

"Thats a pretty professional radio install" According to Andrew after he pulls out a chainsaw to cut the dash

[@marxman00]

he could get good money , Its like an art instalation , "I say, is that a Camarata?"

[@BobRossinspiredpainter]

At least he detailed his truck after...🤣

[@heaven-is-real]

it is for to laugh, my friend

[@kenshores9900]

Andrew you never cease to amaze your followers! Radio installation using a chain saw! Frigin awesome!!!! Cody has great hearing if he can hear a pringles can being opened when he is upstairs.

[@davidplourde8688]

"The face plate doesn't fall off, that's what it's got!". LMFAO. Best laugh I had all day! Love it.

[@Stargate971]

Lol, Andrew: "they make these trucks so cheap & they break for no reason" Also Andrew: Wailing on his tailgate with a sledgehammer

[@NathanielHatley]

In his defense look at how easily it moves with just a few hits from the sledge. That doesn't happen with any of his heavy equipment.

[@evie8143]

😂😂😂

[@xcalibertrekker6693]

Road salt sucks but he does abuse his equipment. He's spent so much the last year guessing he hopes it breaks so he

[@LKN117]

@@NathanielHatley that's from all the rust. They weren't that flimsy factory fresh.

[@jimmymcclelland3727]

Fluid film makes a huge difference

[@sixtyfiveford]

Every once in a while you see these beat to hell work trucks and wonder how it happens..... Andrew must have sold a few off over the years.

[@Wilson_913]

He doesnt sell things. He just uses them till they become one with the earth again.

[@1976benita]

Lmao!

[@LDeezy662]

Wilson913 👏👏👏 bravo! You just graced me with the best laugh in KZbin comments I've had all day 😂

[@EliteGeeks]

I wait for these moments... Chainsaw had me laughing so hard I cried, I have been watching him since the start, and I still get surprised...

[@whattheschmidt]

@@EliteGeeks Same, I knew it wouldn't be conventional but I just thought, 'yea screw that dash, cut out the opening with an oscillating tool', then bam chainsaw going nuts. Hardest I laughed in months.

[@michaelvollmer9491]

Now, I have seen nearly the most of your videos and I am always satisfied when you do some repairs and maintenance jobs on your equipment. Very good skilled kind of work. My deepest respect. So as an engineer, i would be more than happy to have a guy like you in my team. Cheers from 🇩🇪👍😎

[@biggumsHD]

Every video I see with Levi still going strong really makes me happy.

[@AndrewCamarata]

Ill try to get him in the next one.

[@biggumsHD]

@@AndrewCamarata Oh I thought I saw him! Must have been Cody lol

[@AndrewCamarata]

Levi was in this. He supervised the press operation.

[@biggumsHD]

@@AndrewCamarata Well then I’m not going crazy lol. Hey, do me a favor. I dmed you on instagram (about 11 weeks ago incase you wanted to go back and look) for something regarding your privacy in a different video that I saw. Not sure if you already knew about it but just wanted to double check, love the vids and have a good night

[@AndrewCamarata]

@@biggumsHD message again. I get so many on there

[@GamingNinjaSheep]

Andrew: "I gotta change the radio on this thing also". Me: "Uh oh, here we go, it's chainsaw time again."

[@edbenson98]

Exactly what I thought!

[@phil5359]

Haha yes, I was expecting a chainsaw, too! :DDD

[@jayeff3196]

Picked up so many learning curves from this guy it's untrue....so happy to see Levi....❤

[@leonvdm]

Nice video! you can fix alot in a short time! Ive welded a lot of stuff that needed to not leak, my 3 main tips for it: 1: Clean it gooood, oil, dirt, water, paint will make porous welds 2: weld it hot!, 3: Dont do short welds, keep on welding

[@MajorC202]

The face plate doesn’t fall off of it, that’s what it’s got. Nailed it!

[@tpalshadow]

Watching him fix his truck with a sledge will never get old.

[@micheal4487]

“The previous owner hacked up the wiring” Cuts dash with chainsaw. lol Don’t get me wrong Andrew, I love your videos.

[@dakota3847]

This man is my spirit animal. Keeps his vehicles going in very simple, effective and unconventional ways...

[@gregb8174]

Takes chainsaw to dash... "So the previous owner hacked up this wiring" This is why I subscribe to the best channel on KZbin!!!

[@pv2xeek]

When he said "I got one more thing to do to this truck. I got a new radio for it" I had a Vietnam flashback.

[@space_audits]

For a split second I thought I was having the most intense déjà vu in the history of recorded time.

[@65WKFoster]

I was hoping he was going to get rid of those hideous tail lights

[@samwinglewich2133]

"The previous owner jacked up the wiring" Bold of you to assume Dodge wiring wasn't jacked up from the factory

[@TubeScavenger]

As soon as I saw the dash I thought "Oh boy, chainsaw time!", and I wasn't let down. Good man, that Andrew.

[@cliffthelightning]

I found this channel randomly 3 weeks ago, but im already at the state of looking forward to new videos having seen them all. Love your work and detailed videos, i'm actually learning too!

[@Daniel-dg8hd]

"I wonder why my truck is full of plastic now" 😂😂

[@jimsmith5294]

Crocodile Camarata: " A wrench? That's not a wrench. THIS is a wrench!"

[@DIGGER19860]

Maybe "dodge camarata" since crocodile dundee killed crocs and camarata kills dodges?

[@bbqpitboybillyricker-pitma9415]

The REAL Crocodile Camarata: “A wrench? That’s not a wrench. THIS is a wrench!”

[@b00573d]

"Truck got full of plastic somehow" LOL

[@edbenson98]

After ripping the dash out with a chainsaw installing another radio!

[@toooldtochange6098]

And after begging for trucks to be made out of plastic like his 4x...

[@michaelwallace897]

IT LITERALLY TOOK ME AN HOUR TO STOP LAUGHING MY A$$ OFF AFTER THAT RADIO INSTALL.

[@marcryvon]

Me too ! The wife was all anxious for me !

[@bobsmiley6255]

So with you dude.....who needs Zoloft when ya have AC.

[@Dusty2112]

Oh but have you seen the other truck radio install by Andrew? it's fantastic!

[@deceptor99]

"I think I can straighten it out with a wrench" deploys the biggest wrench in the world.

[@step2191]

yeah a 4 footer!

[@tsfab6914]

"A lot of people would just change the cylinder" then Andrew shows how he's not "a lot of people"

[@JohnDoe-ch6qy]

he knows, that's why he has built himself a metal fort made of shipping containers he spends most of his time in, our society loves to ostracize people different from them.

[@davidporter2374]

No harm in trying sucessful you can save a lot $$$$

[@tsfab6914]

That's the point of my comment l. I run my business the same way

[@KB325]

Lol yeah shows why he called andrew the butcher lmfao

[@colin8532]

A lot of people wouldn't use a chainsaw to install a car stereo....LOL

[@MrGfreddy]

Another complete synopsis of engineering excellence A different hammer for every circumstance Greetings from Downunder Thank You Andrew your channel reliably brightens my day !

[@lerkzor]

When I saw you were gonna have to modify the bezel to fit the new radio, I was like 'oh no, he's gonna hack it up with a sawzall, isn't he?' When I saw the chainsaw, I completely lost it. You MAD LAD.

[@bobsmiley6255]

So true ......we all are addicted to this channel.

[@chrisE815]

Did you miss the other radio installation video?

[@selador11]

"I think I can straighten that out with a wrench." Shows up with a wrench the size of the TRUCK!!! =0)

[@lydiaanderson582]

@Hello Selador how are you doing?

[@BanjoNoob2]

Haha I came to post this. "I think I can straighten that out with a wrench." Shows up with Bigfoot's own monkeywrench.

[@paintedblue1791]

That's not a wrench... THIS is a WRENCH!

[@aramreal9898]

د

[@MapexDrummer814]

" Welcome to Camarata body shop; Home of the BFH and self tapping screw to make it look new" how may i help you? lol

[@jcarb123]

Andrew….. you are the funniest guy!!! You are the only one in the world who installs audio with a chainsaw!!! The very best! Only an italian!! Love how you think outside the box!!

[@wkualum3194]

Nice way to start my day! Saturn cars use to be plastic.

[@broo_shs]

true i was looking vice grip video and got info at new Camarata video its up in yt awesome

[@joshoutdoors2078]

Same

[@TheKajunkat]

IMHO, they were the best American cars ever made. Not the best looking, fastest etc. but they were well put together and thought out. I had a first gen that was almost fun to maintain and work on along with getting 33 miles to the gallon. Well thought out. The modern domestics are just a nightmare to work on.

[@kingofbrutaltheocracy9201]

Andrews Autobody: "Vehicle smashed up? Bring it to us, we'll teach it to take a hit!"

[@ronaldwoofer5024]

"i think i can straighten it out with a wrench" *pulls out comically large wrench*

[@nortons4673]

Wile. E coyote wrench😂

[@robertsmith987]

exactly im like wtf where did he get one that big lol

[@cyberhornthedragon]

@@robertsmith987 he's broken one that big

[@davec.3198]

I have one that big and I don't even work on heavy equipment. Thing is amazing. Aluminum and not that heavy.

[@vlogswizzyyy]

Amazing

[@egt93]

The moment he say "and I have a new radio for this" Camarata style installation bangs in your head

[@tomchmielewski2396]

It feels like it’s been forever sense the last Andrew C video

[@kchall5]

He's NY's useful Andrew C, as compared to the one in Albany.

[@killenmyful]

@@kchall5 You beat me too it.

[@bobsmiley6255]

I had gone into full blown AC withdrawals.......

[@billnalder1017]

The 'finesse' Andrew uses for his body work is beyond admirable!..Chip Foose take note!

[@eagle2019]

Andrew missed his calling! In his next life he'll be a custom car builder!! Look at how tight those gaps are!!!

[@buggscarrot9557]

May not be good body work but he will get 200 working years out of his life. where we will only get 30.

[@mr667]

Andrew: I take this car radio. Salesman: Would you like a mounting chainsaw for that?

[@motorbyclist]

how do I thumbs up this comment twice lol

[@johnjames3984]

All the content was excellent, but the chainsaw to modify the dash was OUTSTANDING!!! God bless you Andrew!

[@RSDX99]

You know when a guy likes to spend his spare time fixing stuff he is a Dodge customer for life.

[@Johnnyreengo]

Any American made truck

[@mchuo7834]

Lol. Honestly the dodge diesels actually seem to hold up well to abuse. Andrew’s truck has been worked hard, and all the essential components are still strong. It’s just the inherent Chrysler problems that occur.

[@mchuo7834]

@@Johnnyreengo definitely. The Japanese trucks are a lot stronger. If only they made a 3/4 ton

[@cornholio9186]

These truck maintenance videos is the gift that keeps on giving

[@ChickenParm152]

They always say, sledge hammer is the best tool for fine body work! Love it. Whatever works man!

[@ellisc.foleyjr9778]

I need to fix this bent plow frame. Oh yes I just happen to have a hydraulic press table handy. truck lift, air, grease, he just seems to have all the needed equipment and tools to get the job done. thats called years of doing with out before. and a need to get them. well done Andrew! another lesson in "Fine Tuning" a truck. dash radio and all. Thanks for sharing.

[@Mun56203]

Anyone remember when he first got that truck, said he was gonna fix the old one and use it as a plow truck, said he was gonna keep that one decent..... lol

[@robertweir9034]

I remember him saying that.

[@thefall3551]

Spit my coffee out lol "that's a pretty professional radio install". Camarata your a savage.

[@rkeround2itindustries892]

I have learned to not be drinking or eating ANYTHING when watching this master mic-a-nic at work.....

[@jackdunham8557]

Ya.. And he said it with a straight face ! 😂😂😂

[@notiskoundouris9320]

""Thats a pretty professional radio i installed right there.The face plate doesnt fall off of it."" Between that and the chainsaw on the dash board. i got my daily dose of laughs.

[@jacksak]

I think this was one of his funniest videos.

[@NoWr2Run]

@@jacksak Plus the DAWGS.

[@ianhawk3637]

Alternative title: how to achieve perfect body lines on your vehicle

[@ProsecutorX]

"The car got full of plastic somehow." and i fucking laughed and laughed.

[@chrisbaer4567]

I love that he said "If you have a rusty car, they should just give you a new one; no matter how old it is."

[@VAX1970]

They did there was a class action law suit .. google it

[@andber]

@@VAX1970 tell me more! Link?

[@genebruce6321]

I was going through video withdrawal. It was rough. But then: instant relief! Andrew has posted!

[@penninviisaampi]

I stopped watching your videos at one point since i was so sad about my truck, now its fixed and i got like one week full of your videos to watch :D

[@danielrandolph4235]

“It’s hard to weld things and not have them leak.” Said no Pipefitter ever to his foreman!

[@TF856]

Lol

[@WalterPidgeonsForge]

Well with 10,000 plus pipeline workers out of a job .. (Thank You Mr. Biden?). I am sure there is bunch of guys available to prove him wrong.. but Andrew is tenacious, and cheap..(no offense meant, I don’t like spending money either) So he learns as he goes.. and he does have a point about Plow trucks.. the difference between a plow guy with a pretty truck and a plow guy with a roach is not really that big from a customer standpoint.. both do a good job or they are gone. Lots of people plowing driveways these days.

[@Rustbelt_Research]

@@WalterPidgeonsForge I have multiple friends who work for the pipeline companies and they told me that's not true. They're just not building one or two pipelines they had planned. They're still working on everything else.

[@rclc93]

He's got a good point. Took me forever to weld up what started out as a little hole in my gas tank. lol

[@marcberm]

One chainsaw later: "truck got full of plastic somehow" 😂

[@frankwolf389]

I loved that and "Pretty Professional Installation"

[@marcberm]

@@frankwolf389 Exactly. He's right though all that cosmetic stuff is BS as long as things are structurally sound.

[@alessandromangiapane8729]

Hi Andrew, I'm alex from Milan Italy, I've been following you recently but I want to tell you that it's really nice to see in every video all the things you can do related to your work.I subscribed to your channel and I want to tell you that where you live is beautiful surrounded by this fantastic beautiful nature. levi and cody are beautiful, you know that your surname is the name of the town in Sicily where my father was born "camarata (Agrigento italy). I end greeting you a lot, Hello alex.from milan italy

[@AndrewCamarata]

That’s where my grandfather was from

[@alessandromangiapane8729]

Hi Andrew, Thank you for answering me your grandfather is from Cammarata so.I have cousins ​​from bayonne (new jersey) who have an Italian restaurant "luciano's". you are really too nice and since I have been following you I can't wait for your new vlog to come out. alex from Milan Italy

[@jeffshof5108]

Watching you reminds me of working on 69 chevy,short bed. Now I know it was a rare ,I wish I never had sold it..Had it as daily driver for 6 years.sold it at 24 in 92 learned everything about 4 wheel drive trucks. Love your channel

[@chrishelms1967]

When you were making the silver lines to cut the radio..... I was like wow hes being very careful and accurate this time...... and then I hear the chain saw..... and all is right in the universe

[@seanbrady5026]

Cody sitting in the truck had me dying 5:06

[@josephdomigpe6654]

He’s probably like, “Hurry up Andrew, we got a big snow plowing job to do!”

[@ACoustaDC]

Thanks! I didn't notice that... I thought he was gonna play with the horn when I saw him!

[@josequervo4269]

Andrew was telling Cody when I walk up front take your paw and push this button. Lol

[@HowardBuksbaum]

“Alright. That’s a pretty professional radio install there” LMAO

[@heaven-is-real]

you cannot buy one of those because it is hand crafted

[@JoeMcpad56]

I feel like if you hand ANY piece of equipment to andrew, he automatically already knows how to fix it. Thats awesome!